If your Meyer hardtop needs doors, here is a pair.
https://www.facebook.com/marketplace/item/894885104755220
“1955 Kaiser/Jeep cj5 doors driver and passenger side good glass not all rotted in great shape”
If your Meyer hardtop needs doors, here is a pair.
https://www.facebook.com/marketplace/item/894885104755220
“1955 Kaiser/Jeep cj5 doors driver and passenger side good glass not all rotted in great shape”
This custom top appears to be a shortened wagon roof possibly melded with a DJ-3A cowl windshield piece(?). Unfortunately, it does have some rust. But, someone did some good work on this.
https://columbus.craigslist.org/pts/d/lancaster-jeep-top/7408362188.html
“What appears to be top off vintage Willys Jeep.$800.00”
Andy shared this trencher for sale. Maybe someone can use the parts?
https://www.facebook.com/commerce/listing/867253230604701
“I need some help…. not sure what to do with this. It’s been in the back yard for probably 60years. Thanks”
Might be worth a look.
https://newjersey.craigslist.org/pts/d/sparta-jeep-mil-spec-winter-top/7402631469.html
“Off a 1951 M 38 Military Jeep. Will fit others. All Aluminum except front windshield frame. It had a canvas rear window panel, long gone.”
UPDATE: Status Unknown. Link is dead.
The seller has a variety of parts.
“Willys, CJ2A, CJ3A, CJ3B, CJ5, CJ6, jeep trucks, Utility Wagons and more.
I have lots of small used parts that came of of the vehicles listed above. Engines, transmissions, suspension parts, drivetrain parts. Interior parts, Some body parts.
Get a list gathered and email me you wanted items. I’ll let you know if we have them or not.”
Not sure how much value is here.
https://mendocino.craigslist.org/pts/d/willits-jeep-flat-fender/7392941779.html
“I have a fairly clean tub that the floor has been replaced with diamond plate, frame, hood, grill and fenders for sale. It’s missing the windshield.
No paperwork.”
UPDATE: **SOLD** Was $200.
Blaine spotted this Ford-302-to-T90 setup.
“Jeep aluminum bellhousing to adapt a Ford 302 engine to a Jeep T90 transmission kit, complete with #906203 main drive gear (long shaft 6 cylinder) with bearing, COAZ-7050 Ford bearing retainer and throwout bearing guide, throwout bearing and throwout bearing fork. The bellhousing has no cracks or dents and all threaded holes are in excellent condition. No damaged holes. Everything needed to mate a Ford 302 engine to a Jeep T90 transmission, except for the engine and transmission. This bellhousing is no longer manufactured. Very hard to find in even usable condition. Cash. Text or voicemail, please.”
UPDATE: Status Unknown. Unclear if the parts are still available or not.
Mike spotted this ad for wagon and truck parts. One of the wagons is a sedan delivery wagon.
“Ihave jeep parts for old trucks and wagons let me know what you need [hidden information] BEDS AND SEATS are gone”
Looks like a good price. Has doors.
https://www.facebook.com/marketplace/item/581933546389194
“Aluminum cj2a or cj3a jeep too. I believe it was originally for a 2a but it fit fine on my 3a. In good shape. Trying to get some room back in the garage.”
It’s suppose to work. Great price.
https://www.facebook.com/marketplace/item/1173339449857369
“Warn 8000lb winch works perfect”
UPDATE: **SOLD** Was $450.
Seller doesn’t think this was original to a 1961 CJ-5, but it in fact is a factory hardtop (minus the rust of course).
“Hard top that came off 61 willys Jeep cj5 I don’t think it’s original”
Bill spotted this F-head for sale.
https://siouxcity.craigslist.org/pts/d/okoboji-willys-f134/7387234137.html
“Was running engine pulled from a ’52 or later Willy’s. Its only missing the carb and the distributor cap. Otherwise is complete with bellhousing. Will accept reasonable offers, no delivery. Has been stored with oil in it, intake manifold covered, and plugs in the head so it is a running core. You will need to pick up.”
UPDATE: **SOLD** Was $300.
This looks to be a good price.
“Aluminum top from CJ2. Fits similar models such as CJ3A or MB or GPW, with a little work. Fair condition. Could use some cleaning and TLC. One window cracked on passenger door. Rear window needs work. Might have been known as an Arctic Top. 300 or make offer.”
UPDATE: **SOLD** Was $600.
Might be a good price.
“Two rebuildable CJ2A Jeep motors. Approximately 1946 vintage. Must be picked up. Sold as is.”
UPDATE: **Sold** was $500.
Jeremy provided this photo to show the top installed on the jeep. Because this is a post 1975 hardtop, it likely won’t fit a 1975 or earlier CJ-5 due to the angle and width of the windshield.
Jeremy’s selling this hardtop from his CJ-5.
“Very nice Meyer/Orrville Jeep hardtop. Complete with full size doors, windows work well. Pics show it on my ’76 CJ-5. Stainless hardware included, $700 or best. Calls only: 7 3 4 – nine one five – 0 4 one one”
UPDATE: **SOLD** Was $350.
Glenn shared this (likely) Sears branded Meyers hardtop.
“Used half hard top and doors for jeep cj-3b. Fairly sure it is a sears top, has a little bit of rot but overall decent shape for what it is. Trades for cj parts considered.”
UPDATE: **SOLD** Was $300
Glenn spotted this top for sale, most likely sold by Sears and made by Meyers. Hopefully, someone can use it.
“Nice aluminum top with doors, door mounting pieces and windshield header. It’s in nice shape, not beat up. This will fit a Willys CJ2A, CJ3A, WWII Willys MB or Ford GPW. Hard to find in this shape. Looks to be a Sears tops based on photos I could find.”
These connected under the Dana 20 transferase.
https://minneapolis.craigslist.org/dak/pts/d/faribault-willys-cj-pto/7367013740.html
“Ramsey PTO for a Willys CJ. Has forward and aft outputs. Think it fits early CJ 5 but research displayed model number to determine your application ”
This appears in good shape.
https://stlouis.craigslist.org/pts/d/saint-charles-willys-jeep-cab/7353892334.html
“Complete Kelly full steel cab fits Willys CJ3A.
Basically consists of 6 large pieces.
2 lockable doors with frames that attach to the windshield. The door windows roll up.
2 side panels with large windows.
1 solid piece roof.
1 lift gate with large window.
Had very limited usage and only has minor surface rust from setting outside a couple of years.”
These are an unusual set of Summer Hubs. I suspect they were custom made.
https://www.facebook.com/commerce/listing/547364619804942
“Selling this pair of free wheeling hubs “summer hubs” for dana 25/27 front axle. Asking $40 plus shipping”
Now this is a pile of parts .. Maybe some value?
https://roseburg.craigslist.org/pts/d/grants-pass-1948-willys-jeep-parts/7340127903.html
“1948 Willy’s Jeep parts $500 for all.”
Seems in good shape. You can see what the F-23 looks like in this brochure post: http://www.ewillys.com/2021/05/27/kelly-manufacturings-23-series-tops/
https://stlouis.craigslist.org/pts/d/saint-charles-willys-jeep-top/7334756898.html
“Complete Kelly full steel cab fits Willys CJ3A.
Basically consists of 6 large pieces.
2 lockable doors with frames that attach to the windshield. The door windows roll up.
2 side panels with large windows.
1 solid piece roof.
1 lift gate with large window.
Had very limited usage and only has minor surface rust from setting outside a couple of years.”
This engine looks in good shape and is probably from a CJ-3A or DJ-3A.There’s also supposed to be a jeep chassis and other parts for auction.
https://www.auctionzip.com/Listings/3560096.html?kwd=willys%20jeep&zip=&category=0
“Willys Jeep Chassis, Willys Jeep Motors, Willys Jeep Parts”
Seller is unsure of the model, but given the date provided, I’d say it was a 1953 CJ-3A or CJ-3B. I don’t see pics of the flaps that mount the doors to the body.
https://denver.craigslist.org/pts/d/scottsbluff-willys-jeep-koenig-full/7334072055.html
“willys jeep koenig full metal top cj2a cj 3a cj3b cj5 ???? not sure what model it came off they said they thought it was from a 53 ??? but not sure of that came from a dry eastern wyoming so rust is not a issue has the brass koening tag hard to take good pic of it but doesnt say what model it was …. i have no of the door hinges not 100% what model this is for the doors say early but the front top addition says ? may for a ??? it can stay for a few months but if a tornado high winds hail etc destroy it ITS STILL YOURS NO REFUNDS BY NOT PICKING IT TIMELY MANNER YOU AGREE TO THAT TOP IS LOC NEAR SCOTTSBLUFF NEBRASKA”