It’s suppose to work. Great price.
https://www.facebook.com/marketplace/item/1173339449857369
“Warn 8000lb winch works perfect”
It’s suppose to work. Great price.
https://www.facebook.com/marketplace/item/1173339449857369
“Warn 8000lb winch works perfect”
UPDATE: **SOLD** Was $450.
Seller doesn’t think this was original to a 1961 CJ-5, but it in fact is a factory hardtop (minus the rust of course).
“Hard top that came off 61 willys Jeep cj5 I don’t think it’s original”
Bill spotted this F-head for sale.
https://siouxcity.craigslist.org/pts/d/okoboji-willys-f134/7387234137.html
“Was running engine pulled from a ’52 or later Willy’s. Its only missing the carb and the distributor cap. Otherwise is complete with bellhousing. Will accept reasonable offers, no delivery. Has been stored with oil in it, intake manifold covered, and plugs in the head so it is a running core. You will need to pick up.”
UPDATE: **SOLD** Was $300.
This looks to be a good price.
“Aluminum top from CJ2. Fits similar models such as CJ3A or MB or GPW, with a little work. Fair condition. Could use some cleaning and TLC. One window cracked on passenger door. Rear window needs work. Might have been known as an Arctic Top. 300 or make offer.”
UPDATE: **SOLD** Was $600.
Might be a good price.
“Two rebuildable CJ2A Jeep motors. Approximately 1946 vintage. Must be picked up. Sold as is.”
UPDATE: **Sold** was $500.
Jeremy provided this photo to show the top installed on the jeep. Because this is a post 1975 hardtop, it likely won’t fit a 1975 or earlier CJ-5 due to the angle and width of the windshield.
Jeremy’s selling this hardtop from his CJ-5.
“Very nice Meyer/Orrville Jeep hardtop. Complete with full size doors, windows work well. Pics show it on my ’76 CJ-5. Stainless hardware included, $700 or best. Calls only: 7 3 4 – nine one five – 0 4 one one”
UPDATE: **SOLD** Was $350.
Glenn shared this (likely) Sears branded Meyers hardtop.
“Used half hard top and doors for jeep cj-3b. Fairly sure it is a sears top, has a little bit of rot but overall decent shape for what it is. Trades for cj parts considered.”
UPDATE: **SOLD** Was $300
Glenn spotted this top for sale, most likely sold by Sears and made by Meyers. Hopefully, someone can use it.
“Nice aluminum top with doors, door mounting pieces and windshield header. It’s in nice shape, not beat up. This will fit a Willys CJ2A, CJ3A, WWII Willys MB or Ford GPW. Hard to find in this shape. Looks to be a Sears tops based on photos I could find.”
These connected under the Dana 20 transferase.
https://minneapolis.craigslist.org/dak/pts/d/faribault-willys-cj-pto/7367013740.html
“Ramsey PTO for a Willys CJ. Has forward and aft outputs. Think it fits early CJ 5 but research displayed model number to determine your application ”
This appears in good shape.
https://stlouis.craigslist.org/pts/d/saint-charles-willys-jeep-cab/7353892334.html
“Complete Kelly full steel cab fits Willys CJ3A.
Basically consists of 6 large pieces.
2 lockable doors with frames that attach to the windshield. The door windows roll up.
2 side panels with large windows.
1 solid piece roof.
1 lift gate with large window.
Had very limited usage and only has minor surface rust from setting outside a couple of years.”
These are an unusual set of Summer Hubs. I suspect they were custom made.
https://www.facebook.com/commerce/listing/547364619804942
“Selling this pair of free wheeling hubs “summer hubs” for dana 25/27 front axle. Asking $40 plus shipping”
Now this is a pile of parts .. Maybe some value?
https://roseburg.craigslist.org/pts/d/grants-pass-1948-willys-jeep-parts/7340127903.html
“1948 Willy’s Jeep parts $500 for all.”
Seems in good shape. You can see what the F-23 looks like in this brochure post: http://www.ewillys.com/2021/05/27/kelly-manufacturings-23-series-tops/
https://stlouis.craigslist.org/pts/d/saint-charles-willys-jeep-top/7334756898.html
“Complete Kelly full steel cab fits Willys CJ3A.
Basically consists of 6 large pieces.
2 lockable doors with frames that attach to the windshield. The door windows roll up.
2 side panels with large windows.
1 solid piece roof.
1 lift gate with large window.
Had very limited usage and only has minor surface rust from setting outside a couple of years.”
This engine looks in good shape and is probably from a CJ-3A or DJ-3A.There’s also supposed to be a jeep chassis and other parts for auction.
https://www.auctionzip.com/Listings/3560096.html?kwd=willys%20jeep&zip=&category=0
“Willys Jeep Chassis, Willys Jeep Motors, Willys Jeep Parts”
Seller is unsure of the model, but given the date provided, I’d say it was a 1953 CJ-3A or CJ-3B. I don’t see pics of the flaps that mount the doors to the body.
https://denver.craigslist.org/pts/d/scottsbluff-willys-jeep-koenig-full/7334072055.html
“willys jeep koenig full metal top cj2a cj 3a cj3b cj5 ???? not sure what model it came off they said they thought it was from a 53 ??? but not sure of that came from a dry eastern wyoming so rust is not a issue has the brass koening tag hard to take good pic of it but doesnt say what model it was …. i have no of the door hinges not 100% what model this is for the doors say early but the front top addition says ? may for a ??? it can stay for a few months but if a tornado high winds hail etc destroy it ITS STILL YOURS NO REFUNDS BY NOT PICKING IT TIMELY MANNER YOU AGREE TO THAT TOP IS LOC NEAR SCOTTSBLUFF NEBRASKA”
Tom spotted this one. There’s no overall pic fo the winch included.
https://www.facebook.com/marketplace/item/341670806978754
“PTO driven Ramsey winch. Internals rebuilt with new yoke. Gears were in great shape. All new seals. Was going to put on Willys Jeep. Sold the Jeep. I have the fairleads, and bar to engage the winch. I also have the cable that goes with the winch”
This might work for someone.
https://www.facebook.com/marketplace/item/566186604349574
“1951 Willys M38 Jeep tub. Pretty good shape. It’s an extra I did not use on my project. Previous owner replaced the hat channels underneath. There is no toolbox but I have a cj 2A toolbox I will throw in. It has the battery compartment cover and glove box door”
UPDATE: **SOLD** Was $350.
Looks like a good price. It’s likely a Bestop.
“Black soft top for the early jeeps, like new. I bought this jeep from an old man, and I am certain it never spent a night outside. the windows are clear and not faded, no imperfections anywhere, Its like new. You get all the hardware to mount it just like it looks in the photo. Its on an m38 now, not sure what else it fits, you do the research. I see these go for about a grand on line, 350 come get it ! I do not respond to texts. I repeat.. I do not respond to texts. Wheels and tires available soon”
UPDATE: **SOLD** Was $150.
You’ll need the vertical-style windshield to make this flat fender top work
“I have an old jeep hardtop. Believe it belongs on a Willys Jeep? Not 100% sure what it fits the years. Selling as is for parts or usable? The windows are froze up in the doors. Feel free to ask questions I will answer to my best knowledge.”
Ted’s got these parts for sale.
View all the information on eBay
“Willys Jeep CJ2/3A VEC Farm Jeep Newgren Single Bottom Plow Front Counter Weight. Condition is “Used”.
For sale is a Willys Jeep specialized equipment combo consisting of a Newgren brand single bottom land plow and front counter weight. The Newgren brand plow was designed to be used on Willys Farm Jeeps equipped with either a Newgren , Monroe , love , or Stratton Three Point Hydraulic lift or Hitch on back of Jeep. The front weight was mounted on front of Jeep as a counter weight to any of the specialized equipment being used on rear of keep with hydraulic lift.
The front counter weight weighs 265 lbs roughly and is in great shape.
The Newgren single bottom plow is also in very good condition for its age with original Newgren serial number tag still intact. This original Willys specialized combo would be a great addition to any correct Farm Jeep restoration or working Jeep.
These items are way too heavy to be shipped so local pickup will be best, I’d be happy to store them for a reasonable time period once they are paid for
This seller is selling 3 CJ-2As and some parts.
https://northernwi.craigslist.org/pts/d/jeep-and-willys-parts-and-whole-jeeps/7318024532.html
“I have a bunch of Willys and Kaiser era Jeep parts. Some of this will work on later AMC era CJs too, but do not assume they will. Many things changed from 71 to 72 and then even more from 75 to 76. I have frames and tubs and axles and transmissions and cases and a bunch of other small parts. Email me and lemme know what you need.
I also have complete 46, 47, and 48 CJ2As. All are for sale. I have tons of random other parts as well – frames, axles, etc. Plenty to kick start a good project.”
UPDATE: **SOLD** Was $225.
This is a B style Scheneker Plow (you can see some brochures for this model on the lower portion of this post).
“‘46 Willys Jeep snow plow worked fine but Took it off to do my restoration.”
Based on the “W”, I’d say this is a 1950-1953 door. Looks in good condition.
UPDATE: Barney Goodwin spotted a similar tool kit branded by Cadillac:
===================
Original posted Dec 10, 2021: Anyone familiar with this unusual took kit that’s been listed on eBay for $80 obo? Was it included in any jeeps or just offered as a dealer option? I would guess it was available in the early 1970s?
I’ve had these same tools for years, but didn’t know they came in a Jeep-marked tool kit container. Here’s my tools (there is nothing marked “jeep”).
Here’s the set that’s available on eBay:
View all the information on eBay
“Vintage Jeep socket RATCHET WRENCH full kit.”