Seller says to make an offer. $50 is listed on the ad as the price, but that might just be a placeholder.
https://bend.craigslist.org/pts/d/redmond-army-jeep-parts/7135926300.html
“I have a lot of left over parts from a 1952 M38A1 JEEP project.”
Seller says to make an offer. $50 is listed on the ad as the price, but that might just be a placeholder.
https://bend.craigslist.org/pts/d/redmond-army-jeep-parts/7135926300.html
“I have a lot of left over parts from a 1952 M38A1 JEEP project.”
Gus has a variety of CJ-2A parts available.
https://jerseyshore.craigslist.org/atq/d/neptune-cj2a-parts/7157585087.html
COMING SOON
2 Orginal COOPER Radiator
1100 FOR ALL”
I’m not sure what is priced at $500 (each item, all items?)
https://www.facebook.com/marketplace/item/867070000463072/
“Jeep cj 2a bodies”
UPDATE: **SOLD** Was $500.
Seller will thrown in a second F-head for free.
“For sale 1952 Jeep Willys Engine, Manual transmission and two stick transfer case. Engine was running, it smoked a little bit, transmission and transfer was working fine. The electrical it’s already converted to 12 Volts. I’m asking 500.00 or best offer. Hablo Español. I can throw an extra identical engine for free.”
UPDATE: **SOLD** Was $350.
Galen’s got this PTO winch for sale.
“Koenig Model 100 PTO Winch for sale. $350 OBO. Winch, plate & cable, & chain drive, no other PTO pieces available. All parts move freely, winch is in good shape, just needs the PTO shaft and PTO transfer case. DM me to discuss delivery. Located in Northwest Arkansas.”
Steve spotted this body for sale.
https://philadelphia.craigslist.org/pts/d/lansdale-1943-willys-mp-tub-body/7154265530.html
“Original 1943 Willy’s Mp tub/body as is condition, needs restoration
$1000 or best offer”
This CJ-5 Half-top has been slightly modified. I’ll highlight the 23-series tops in an upcoming post (it’s been upcoming for a while now …).
https://harrisburg.craigslist.org/pts/d/carlisle-metal-top-and-doors-only-for/7141339984.html
“Hard top half cab with bed lid and doors only from 1963 Willys Jeep. Top and doors only. Jeep is not for sale.”
Mark spotted this one for $70.
https://charlotte.craigslist.org/pts/d/shelby-original-willys-mb-ford-gpw/7147478940.html
“Original Willys MB Ford GPW Dodge Truck Defroster in Unused Condition. Complete 6volt defroster kit. Great display item for a vintage Jeep or Truck. Would probably work but recommend for display due to its age. Pick up in Western NC. Unable to ship.”
I don’t recognize the PTO box on the rear of this transfer case.
https://lacrosse.craigslist.org/pts/d/westby-jeep-willys-cj2a-3a-parts/7145518761.html
“Misc parts off a 1953 CJ3A I’m selling as I don’t need for my build. More parts listed eventually, but right now:
Tranny/Tcase/PTO Assembly. Tcase and PTO shifters move freely, transmission appears stuck. $250
Rear Axle. Springs not included as I will cut ubolts and keep. $150
Hood, rough shape, but use for decoration or awning over shop door! Has stamped Willys script on it you could cut out and use for decoration. $50”
No pics provided. This may be something or may be nothing …
https://eastoregon.craigslist.org/pts/d/burns-40-year-collection/7150559827.html
“Something for everyone. Hotroders, classics, orrigionals. I have frames,front ends,rear ends,transmitions, Engines,complete and partial bodies, for flat fender Willy’s, 55 through 59 Chevy and GMC, model a,early 30s ford, s10, 1040 Chevy pickup, 1933 Chevy car, running and driving 1956 Chevy suburban that has been hot rodded, restored 60s 12 ft. Camper to pull behind your classic, s10,orrigional running and driving 59 Willy’s pu Way to much to list it all. Call me to see if I have what you need.”
Looks like a good project body.
https://saltlakecity.craigslist.org/pts/d/salt-lake-city-jeep-52-willys-m38-body/7148438780.html
“1952 Willy’s Original M38 Body Tub. Has been sandblasted and stored inside. Needs repairs, don’t they all, Online seen them in worse shape for $1,500. These were made from 1950 to 1952 so pretty rare. The price is for cash. Also have a brand new M38 hood.
www.radjeeper.com
PARTS SOLD AS IS
MANY MORE FULL SIZE AND AND CJ JEEP PARTS AVAILABLE
INSTALLATION AVAILABLE
THE RAD JEEPER
JEEP PARTS
“Salty City’s Custom Jeep Shop””
UPDATE: **SOLD** Was $200.
Looks like a real good price. Jeep is not for sale.
“Koenig metal jeep top. This top came off of a 1959 willys CJ5. Good condition. All glass is good. I have the doors but are not in the pictures. The top is off and ready for pick up, It’s heavy. I got a lot of thumbs up when it was on the Willys, but I am going with the soft tops now. $200 obo. Jeep is not for sale. (don’t ask).”
UPDATE: Still some parts.
(04/16/2019) Seller has a variety of parts.
https://www.facebook.com/marketplace/item/562299270949891/
“Lots of 40’s, 50’s jeep willys parts, few sets of axles, transmissions, tcases, leaf springs, hoods, w/s frames. And more.. Located in Charlotte Michigan X posted Happy to provide any pics or info needed”
I can’t tell if the rust is that bad or not.
https://www.facebook.com/marketplace/item/562299270949891/
“Have old Jeep doors half, full and solid metal roll down window ones make an offer”
UPDATE: Price dropped to $150.
(02/20/2020) Looks in good shape.
https://denver.craigslist.org/grd/d/englewood-front-bumper-weight/7129993009.html
“Front bumper counter weight for Willys Agri-Jeep or early CJ farm jeep. Used with lift for impliments. Weighs approx. 285 lbs.”
UPDATE: Still Available.
(06/02/2020) Kemco top with tag, model F 2A 3A 300 A. It’s especially rare to see these in Washington State.
https://www.facebook.com/marketplace/item/1313601018832821/
“CJ3A steel top or possibly other flat fender jeep”
Could be a good price. Jeep is not for sale.
https://nwct.craigslist.org/pts/d/morris-plow-for-1956-jeep-willy/7135765821.html
“Plow and assembly for 1956 Jeep Willy
Was a restore job, don’t want the plow
Last photo show Jeep done!!”
UPDATE: **SOLD** Was $401.
Pics could be a little sharper.
“Willys arctic top
Aluminum
Sold by montgomery wards
With doors
Good shape
Currently on a CJ2a willys jeep
Was told will fit a CJ 3 also”
Looks in good shape.
https://northernwi.craigslist.org/pts/d/hazelhurst-willys-jeep-snow-plow-set-up/7142613888.html
“I got a plow set up off a 1955 Willys truck, pump hose lever , ram 6 or 6 1/2 ft plow your choice not both and bumper mount”
UPDATE: Still Available.
(05/30/2020) The tops has some dents at the very least. No obvious rust.
https://wausau.craigslist.org/pts/d/bowler-topper-for-willys-jeep/7129373959.html
“Topper came off a 1957 willys jeep”
Bill posted this OEM propeller / drive shaft guard kit on eBay. It’s perfect for someone restoring a jeep and wanting all the extras.
View all the information on eBay
“Driveshaft Guards Kit – Willys Vintage Jeep OEM CJ-3B CJ3B CJ5 CJ-5 FC-150 FC150. Condition is New.
Hello – pieces like this do not come around often. I cannot recall the last time that I saw a set of driveshaft guards for sale. This is an as-new Willys part in the original box. Original instructions are included. Packing newspaper confirms the build date as 1959-1960.
The loose pieces were sealed up in that cloth bag, I assume everything is there. All of the guards and brackets included are pictured. They all appear to be in excellent condition.
Look at the pics for fitment info. This kit says 3B, 5, and FC150. I can tell you that I have what appears to be the same kit on my CJ-2A from new. Maybe Willys labeled it only by the vehicles that they were producing in 1959 only. I don’t know, as I wasn’t there.
This will make the perfect accessory for your restoration, or buy it and copy it so everyone can buy a set of these… from you.
I was intending to put these on my CJ5 restoration, but I found a T98 4-speed trans for it. This kit will not working with a T98 since the trans is way bigger. So I am regretfully selling these to make more room for other stuff.”
Matt’s selling these M-38 parts. You can email him directly at mpstratton66 @ gmail.com (no spaces around the @).
Here’s the body. As you can see, it’s missing the steps.
https://www.facebook.com/marketplace/item/889161208228309/
https://www.facebook.com/marketplace/item/299496947743666/
https://www.facebook.com/marketplace/item/718456625575022/
“I have multiple M38 Jeep parts for sale. I have a frame and running gear that has the following: Ford 302/C4 Trans with military transfercase with Hi/Lo. I believe its a Dana 44 in the rear and a Dana 30 in the front. (I don’t know the Dana series at all.) I also have an original M38 tub in beautiful shape. The frame to match, windshield, gas tank, 2 tailgates , grille with war headlights, and various other parts I will try and post them all but FB only allows ten photos at a time… I would like to sell it all together and would put it on a trailer and deliver for a small fuel fee.”
UPDATE: **SOLD** Was on eBay.
Shane spotted these rare Canfield Wrecker Plates on eBay.
“CANFIELD TOW BAR CO. TOW TRUCK METAL BADGE EMBLEM NAME PLATE VINTAGE RARE. this was on a wrecker boom from a jeep when it was common to use jeeps as tow trucks. they are in good condition a few minor dings(see pics) for there age, they measure 12″ long and 4″ high. looks like the model no. is C450L and serial no. is 9204.”
Looks like a fine cage at a reasonable price. This might not fit a low hood depending on how tightly the front loop follows the high hood cowl and windshield.
https://spokane.craigslist.org/pts/d/spokane-willys-jeep-roll-cage/7118002356.html
“Roll cage with mounting hardware removed from a 1954 CJ3B. I would assume it would fit any flat fender cj 3a, 2a ford or whatever.”
Price is right, but will need some work.
https://oregoncoast.craigslist.org/pts/d/coos-bay-rare-willys-jeep-civilian/7127497775.html
“Early civilian Arctic top. These are hard to find.”