UPDATE: Still Available.
(06/02/2020) Kemco top with tag, model F 2A 3A 300 A. It’s especially rare to see these in Washington State.
https://www.facebook.com/marketplace/item/1313601018832821/
“CJ3A steel top or possibly other flat fender jeep”
UPDATE: Still Available.
(06/02/2020) Kemco top with tag, model F 2A 3A 300 A. It’s especially rare to see these in Washington State.
https://www.facebook.com/marketplace/item/1313601018832821/
“CJ3A steel top or possibly other flat fender jeep”
Could be a good price. Jeep is not for sale.
https://nwct.craigslist.org/pts/d/morris-plow-for-1956-jeep-willy/7135765821.html
“Plow and assembly for 1956 Jeep Willy
Was a restore job, don’t want the plow
Last photo show Jeep done!!”
UPDATE: **SOLD** Was $401.
Pics could be a little sharper.
“Willys arctic top
Aluminum
Sold by montgomery wards
With doors
Good shape
Currently on a CJ2a willys jeep
Was told will fit a CJ 3 also”
Looks in good shape.
https://northernwi.craigslist.org/pts/d/hazelhurst-willys-jeep-snow-plow-set-up/7142613888.html
“I got a plow set up off a 1955 Willys truck, pump hose lever , ram 6 or 6 1/2 ft plow your choice not both and bumper mount”
UPDATE: Still Available.
(05/30/2020) The tops has some dents at the very least. No obvious rust.
https://wausau.craigslist.org/pts/d/bowler-topper-for-willys-jeep/7129373959.html
“Topper came off a 1957 willys jeep”
Bill posted this OEM propeller / drive shaft guard kit on eBay. It’s perfect for someone restoring a jeep and wanting all the extras.
View all the information on eBay
“Driveshaft Guards Kit – Willys Vintage Jeep OEM CJ-3B CJ3B CJ5 CJ-5 FC-150 FC150. Condition is New.
Hello – pieces like this do not come around often. I cannot recall the last time that I saw a set of driveshaft guards for sale. This is an as-new Willys part in the original box. Original instructions are included. Packing newspaper confirms the build date as 1959-1960.
The loose pieces were sealed up in that cloth bag, I assume everything is there. All of the guards and brackets included are pictured. They all appear to be in excellent condition.
Look at the pics for fitment info. This kit says 3B, 5, and FC150. I can tell you that I have what appears to be the same kit on my CJ-2A from new. Maybe Willys labeled it only by the vehicles that they were producing in 1959 only. I don’t know, as I wasn’t there.
This will make the perfect accessory for your restoration, or buy it and copy it so everyone can buy a set of these… from you.
I was intending to put these on my CJ5 restoration, but I found a T98 4-speed trans for it. This kit will not working with a T98 since the trans is way bigger. So I am regretfully selling these to make more room for other stuff.”
Matt’s selling these M-38 parts. You can email him directly at mpstratton66 @ gmail.com (no spaces around the @).
Here’s the body. As you can see, it’s missing the steps.
https://www.facebook.com/marketplace/item/889161208228309/
https://www.facebook.com/marketplace/item/299496947743666/
https://www.facebook.com/marketplace/item/718456625575022/
“I have multiple M38 Jeep parts for sale. I have a frame and running gear that has the following: Ford 302/C4 Trans with military transfercase with Hi/Lo. I believe its a Dana 44 in the rear and a Dana 30 in the front. (I don’t know the Dana series at all.) I also have an original M38 tub in beautiful shape. The frame to match, windshield, gas tank, 2 tailgates , grille with war headlights, and various other parts I will try and post them all but FB only allows ten photos at a time… I would like to sell it all together and would put it on a trailer and deliver for a small fuel fee.”
UPDATE: **SOLD** Was on eBay.
Shane spotted these rare Canfield Wrecker Plates on eBay.
“CANFIELD TOW BAR CO. TOW TRUCK METAL BADGE EMBLEM NAME PLATE VINTAGE RARE. this was on a wrecker boom from a jeep when it was common to use jeeps as tow trucks. they are in good condition a few minor dings(see pics) for there age, they measure 12″ long and 4″ high. looks like the model no. is C450L and serial no. is 9204.”
Looks like a fine cage at a reasonable price. This might not fit a low hood depending on how tightly the front loop follows the high hood cowl and windshield.
https://spokane.craigslist.org/pts/d/spokane-willys-jeep-roll-cage/7118002356.html
“Roll cage with mounting hardware removed from a 1954 CJ3B. I would assume it would fit any flat fender cj 3a, 2a ford or whatever.”
Price is right, but will need some work.
https://oregoncoast.craigslist.org/pts/d/coos-bay-rare-willys-jeep-civilian/7127497775.html
“Early civilian Arctic top. These are hard to find.”
UPDATE: **SOLD** Was $500.
Could be a good price. You’ll want to verify how the front of the top mounts to the windshield [channel mount (3A or M-38) or twist fobs (MB/GPW or CJ-2A … yeah, I know that’s not the right name for them, just can’t think of the right name at the moment)]. The top is resting on a CJ-5, but that’s just for show.
“Best Top for Jeep CJ2A 1945 to 1949 and MB 1941 to 1945 with bows. This is a top I received with a 1948 CJ2A that I am restoring and chose not to put a top on it. It is a new top that has not been installed, in new condition. Have the original installation instructions and owners manual, both soft doors, bows, bag of parts. We displayed this topper on our Jeep (which does not fit) for pictures only. Any questions please email.”
Seller has a variety of parts for sale. Sounds like it is mostly trucks and wagons, but there may be other parts.
https://victoriatx.craigslist.org/pts/d/victoria-miscellaneous-willys-parts-etc/7130056260.html
“I have a bunch of misc. random Willys Jeep parts i have collected over the years, if you’re needing something particular email me your needs and i will look to see if i have it. Parts for old Willys flatfenders pre Kaiser. 1941 through 1951 era. Most of what i have will need attention or some sort of repair before use.
The picture is a corner shot of my ‘48 truckster, it is primarily here for an attention getter to the appropriate audience.
Borg Warner T96 three speed plus electric overdrive, I have three to choose from they were all from 2WD Wagons but were used in many other makes. These have been kept inside. I am asking $175 each or $500 for all three.
Pair of truck/wagon doors $200
Complete front clip for 46-48, hood, grille, fenders… $500. I was saving these for my ‘48 truckster but will be selling it also soon.
Have other random bits of Willys vehicles jeeps, trucks & wagons.”
TJ shared Therese. The seller listed these at $100, but it sounds like that is just a place holder. Seller is really looking for offers.
https://www.facebook.com/marketplace/item/246167143348842
“I’ve got an arctic top off a 47 cj2a and a Kayline soft top. The Arctic top has been on the Jeep for many years just sitting in a barn. Pretty dirty and definitely needs paint, but structurally sound. The Kayline top I just got for the Jeep, as I am starting to fix it up, but it is not going to fit the full roll cage that I’m using. Seems to be in decent shape, just needs to be cleaned. Honestly, I’m not really sure what to ask for these tops, so if you’re interested, just make me an offer.”
Chas has some nice M-38 parts for sale on eBay, some of which are shown below. So far, all parts start at .99 with no reserve. He’ll be selling additional hard-to-ship parts locally as well, such as a hardtop.
UPDATE: **SOLD** Was $1500.
The body looks to be reinforced in the back, under the cargo area, and under the main part of the body.
“Willys Jeep heavy duty fiberglass body tub and one piece front end. Will fit CJ2, 2A, and 3A as well as any custom application. White gelcoat finish. Same as new been in storage 25 years. Lighter than steel. Stronger than steel. Cost less than steel and WILL NEVER RUST.”
UPDATE: **SOLD** Was $500.
Not sure how much these run new. Seller will not ship.
“Reproduction WWII Jeep combat rims for Ford GPW or Willys MB . Five rims all new for $500. Pick up only no shipping”
This could be worth a look. Looks in good shape.
https://roseburg.craigslist.org/pts/d/roseburg-cj2a-hardtop/7131408543.html
“I believe this came with my cj2a but it won’t fit with the roll cage I built for the Jeep so I have no use for it. It doesn’t have any nameplates or anything so I don’t know the brand. Glass and everything is intact and I don’t think it has ever been assembled”
Seller has several parts for sale, including a 26 tooth Warn OD.
https://allentown.craigslist.org/pts/d/quakertown-willys-jeep-parts/7126731263.html
“Headlight buckets $50 Inside door latches and handles $60 window cranks new $40 Bumper $65
Input shafts part. #936448 $50 each Trans bearing retainer $35 Speedometer $50 Heater control
$35 Hood hold downs $5 Overdrive 26 tooth $800 Wing window parts”
Could be a good price.
https://philadelphia.craigslist.org/pts/d/pottstown-wester-snow-plow/7124927358.html
“7 FT. WESTERN SNOW PLOW HAS NEWER ANGLE CYLINDERS. PUMP, RELIEF VALVE, CONTROL VALVE, HYDRAULIC TANK AND MANUAL CONTROLS. MOUNTING BRACKETS, ARE OFF OF A 61 WILLYS PICKUP.”
No pics provided, but there is a pic of this rare PTO here:
http://48cj2a.com/images/pto/Rhino/rhinowwarnod.jpg (it is mounted to the back of a Warn adapter that is mounted to the back of a Warn overdrive). The photo is from this great page for viewing different PTO options: http://48cj2a.com/PTOs.htm.
Here is another photo example from a different page that also includes a rebuild of a Rhino PTO: https://tantel.ca/Rhino%20PTO_2.html
And now for the Craigslist ad:
https://minneapolis.craigslist.org/wsh/pts/d/marine-on-saint-croix-rhino-pto-willys/7131133036.html
“Rhino PTO transmission for a Willys Jeep. Very rare. Needs bearings. Other willys parts for sale. $800 B/O Trade.”
Seller has a truck load of parts left over from a restoration.
https://stlouis.craigslist.org/pts/d/union-1942-era-jeep-parts/7127390820.html
“I have a pickup load of parts left over from renovating a1942 WWII Jeep. While not a complete list, the parts include:
• 2 F Blocks
• 1 L Block
• 3 flywheels
• various oil pans, pistons, crankshafts, valves, carburetor
• set of bows for canvas top
• Radiator
• Brake drum, new
• 5-gallon “Jerry” gas can
• Governor
• 2 sets brake shoes, new
• Guages, some used, one new
• Steering box spindle, new in box
• Various spare parts and left-over cables not used from new 6-volt wiring harness
• Horn Bracket
• 4-Manuals, Parts, Technical, Maintenance
Parts can be delivered for a reasonable fee within a reasonable radius of Union, Missouri. Fork lift available to load on your vehicle. Parts are on pallets. Condition varies from used to new. Blocks andHeads have not been Magna-fluxed.”
UPDATE: Status Unknown.
Seller has miscellaneous parts as well.
“Several Jeepsters, Station Wagons and Trucks for sale.
Good custom wagon material.
Jeepster bodies–$100.00-150.00.
Wagon bodies–$500.00-900.00.
Truck bodies–$250.00-500.00
Lots of miscellaneous jeep parts for 1940’s to early 50’s
Two rebuilt 4 cylinder jeep motors. One F-Head, One L-Head $2,000.00 Each”
Seller has a variety of things.
https://topeka.craigslist.org/pts/d/tecumseh-ford-gpw-parts/7120833736.html
“Ford gpw body, frame with a 94000 range serial number, fenders, steering column, theres a sheller steering wheel that some one began fixing with epoxy, windshield frame, transmission case, shifter top and tcase from a cj2a, also have a military 1/4 ton trailer frame with an acm number of 146858, looking to sell as a lot for 1200, for another 150 I can throw in an axle and a good set of springs for the trailer, please call or message with questions, thanks”
UPDATE: **SOLD** Was $400.
Looks like a good cage.
“Full roll cage out of 1946 Jeep CJ2A. No dents, no cracks just not going to use.”