UPDATE: Status Unknown.
“1950s Willys Jeep parts.Make offer! Also totally rebuilt 1957 Willys needs body for it.”
UPDATE: Status Unknown.
“1950s Willys Jeep parts.Make offer! Also totally rebuilt 1957 Willys needs body for it.”
Seller is looking for $80. It needs some work. Seller will consider an offer. Seller does not want to ship it. These pics are the best documented images I’ve found for this top. Here is the brochure: http://www.ewillys.com/2018/02/17/blue-star-hardtop-half-cab/
View all the information on eBay
“This auction is for an aluminum hard top and door that came with a 1947 Willys CJ2A Jeep that I purchased. (The Jeep is not for sale.) The hard top is incomplete and has a few issues, but this might be handy for someone that has a similar hardtop.
Here’s the bad news. The rear plexiglass is cracked, there are a couple of small cracks in the corners of the aluminum roof panels. I have a drivers side door, but the mating hinge that should be on the roof portion is missing. I do not have a passenger door, but the hinge is on the passenger side of the roof portion. The door is set up to have some sort of window, but it is missing the window.
I’m hoping I’ll find someone out there who could take advantage of these parts. It doesn’t weigh much, but it’s just too big to ship. The buyer will need to pick this up just outside of Buckingham Iowa.”
UPDATE **SOLD** Was on eBay.
Starting bid is $300.
“Up for auction is a pair of NOS Dualmatic locking hubs. They are Chrome and in excellent condition. Comes with instructions and original decal, bolts, and locking clips. Unfortunately I do NOT have the parts catalog so I can NOT ID these by make and model. But I can give you dimensions: 4.375 overall diameter, 3.125 long, 10 internal spline, 3.750 bolt hole pattern center to center. The dualmatic # 80. I am selling these as is as described. Please be sure they are what you’re looking for before bidding. Please email with any questions. High bidder pays$16.50 for S&H.”
UPDATE: **SOLD** Was $450/set.
This is a great price. These appear to be NAPCO adapters.
“I have two sets of dual adapters for Willys MB and Ford GPW
$450.00 cash only per set of two
The dual wheel kit is very easy to install. Remove the original lug nuts from a wheel, leave the wheel on, install extended lug nuts, install the cast hub, install next wheel, and tighten up original lug nuts on extended lug nuts.
Each set includes both left (5) and right (5) threaded extended lug nuts and two cast hubs.
Very Hard to find…
Will sell both sets for 800.00 cash only”
Does look like much value here, but maybe(?) someone can use some of the parts for a cheap PNW race rig.
https://vancouver.craigslist.org/van/snw/d/aldergrove-mud-race-truck/6880591653.html
“46 willys narrowed lenghend has no motor has turbo 400 dana 20 transfer drive shafts chev half ton diffs posi front rear 35 inch boggers rear ground hawgs front billetdistributor blaster coil 6al ignition box monster tac nitrous system removable steering wheel cheap must go”
UPDATE: **SOLD** Was $450.
Might be worth a look.
“decent condition. kept in barn storage for decades. 1 door missing outer handle and glass. 1 rear lift gate bracket needs replacement. $450 for everything.”
Seller has other crated M-151 parts and some MB parts.
https://www.facebook.com/marketplace/item/2166294866823048/
“1962 Mott M-151 Complete crate engine for 850.00 . I have crates and boxes full of original parts for a 1962 M-151 and 1945 Willy’s MB available. Whip antenna ..MP light.. Heater’s for both .. two mounted whells & Tires.. radiators for both.. new top for a M-151 ..lights carbs distributors .. Netting … Willts MB top shifter plate with shifter handle complete…To much to list call text or message me with what your looking for or buy everything and you can resell it .. I have to many projects going on to individually list everything… You know how expensive these parts are when you go to buy them for your Jeep’s.”
Fraser shared this link to an online auction out of Texas that includes some jeep parts.
https://hibid.com/catalog/165872/docs-auto-shop-live-auction-online-prebid/?g=all-categories
“Over 700 Lots in the sale. Tons of Military Parts (M35A3 / M715 / Jeep Willys) Boats / Vehicles / Mud Racer / 54 LS5/Dana 60 /Dana 80/ Complete Willys Drivetrain/ T90 Trans/ Dana20 Transfer Case/Turbo 400 Trans/Turbo350 Trans/Onan Generators/ Sun Distributor Tester/New 10 Ton Jacks/Saws/ Cat 3116 Parts/Axles/Filters Ramsey 20 Ton Winches/Industrial Box Fans/AG Equipment/Wheels/Tires Hunter Wheel Balancer/Air Bag Kit/ Torque Converters/ Brake Parts/Engine Components/ Bearings /Starters/Alternators/Clutch Assembly/Trans Jet Fluid Transfer System/ Alternator Testers/Starter Testers/Sun Investigator Gas Diesel Performance Analyzers Misc. Pumps/Motors/Gauges/ Gooseneck Trailer/ + Much More!”
UPDATE: Status Unknown. Was $400.
Glenn shared this ad. Looks like a good price.
“This is an Excellent Koenig Winch it is set up to fit a CJ3B has bumper attached I have all the component’s it is a working unit.”
If you are looking for a non-stock 2A body, this could work. It’s one of the repro CJ bodies with the passenger side tool indents and military-like glove box on the passenger side of the dash.
https://nmi.craigslist.org/pts/d/oden-cj2a-willys-body/6874059072.html
“cj2a willys jeep body reproduction steel perfect condition cost close to 4000 new selling for 2000.dollars. This body was never installed on a jeep yet. firm price”
UPDATE: **SOLD** Was $250.
Needs some work.
“Koenig 550 Super Full Cab for vintage Willys / Jeep CJ
Made to fit CJ-2a CJ-23a CJ-3b
Full size lockable cab
Lift up back access
Roll-up windows in front, slide windows in the sides
This is a project piece – the perfect addition to your vintage flatfender
– currently sitting on a cj5 and will require 4 strong people to remove/carry
– Doors are not currently attached
– all glass needs replaced (I’m told it’s a simple glass pattern and not expensive)
– locks need re-keyed (keys were lost years ago)”
It is a mix of parts.
https://littlerock.craigslist.org/pts/d/el-dorado-parting-out-willys-jeep-m38/6873322933.html
“I’m parting out 1951 Jeep M38. It has a combination of military and Civilian parts (CJ3A). Too many parts to post all the pictures. Email if you are interested in anything and I will send you the pictures.
Partial list
New/Aftermarket parts
Left and right replacement floor panels (M38) ($100 each)
Left and right replacement cowl side panels (M38) ($100 each)
Left and right replacement floor braces (M38) ($100 each)
Aftermarket windshield frame (M38) ($400)
Aftermarket Front bumper (M38) ($75)
Someone ought to be able to use this.
https://akroncanton.craigslist.org/pts/d/akron-willys-jeep-1-2-cab-canvas-top/6873607091.html
“Willys cj5 jeep 1/2 cab canvas top, no doors or back panel . Made by Beachwood canvas in New Jersey. New. Asking $500 OBO callers only no texts.”
Maybe someone can use these parts?
https://modesto.craigslist.org/pts/d/hilmar-willys-jeep/6870935390.html
“Willys jeep m38 tub and windshield frame, cj grill custom made rear bumper and mid 80’s k5 axles I was going to build a rat rod / hot rod but dont have the time anymore asking $800 for everything”
Is this a factory option or period correct aftermarket option or something that was added later?
https://portland.craigslist.org/wsc/pts/d/gaston-1951-willys-wagon-complete-roof/6871937160.html
“complete with all components.”
UPDATE: **SOLD** Was $300.
Seems like a good price.
“Complete replacement floor pans for willys M38a1 military jeep or pre 1971 CJ-5 jeep. $300 for all (will not sell separately). Set includes everything that is pictured.
Floor pans are powder coated Olive drab green.”
UPDATE: **SOLD** Was $150.
Original box, too!
“Selling (2) two Willy’s Jeep WL-2 Locking Hubs–Warn Mfg. Co.
In original box; asking $150 for the pair.”
Seller has a variety of parts ,but most look to be CJ-5/CJ-7 parts.
https://atlanta.craigslist.org/atl/pts/d/rome-cj-jeep-parts/6866548698.html
“CJ7 rocker moldings-150 per pair
Chrome OEM center caps-25 each
Power steering setup complete 6 cylinder-250
Narrow trac axles geared 3.07 one piece axles-450
AMC V8 lower pulleys-45 each
Cj7/cj8 tailgate-100 each
Chrome bumperettes-80 for pair
Auto non tilt steering column-250
New 4 speed and 5 speed shifter knobs-15 each
T-18 4 speed shifter knob-20 each
Set of five 15×7 chrome wagon wheels OEM with center caps-600
Complete 304 without power steering-500
1976 CJ5 frame very solid-300 Continue reading
UPDATE: **SOLD** Was $1500.
Not many of these around.
“This is an original military xenon search light. These were originally used in the late M38A1 and M151 series military jeeps. These were mounted in the bed. We have three of these available. They have been in very long term storage. They are sold as is”
UPDATE: **SOLD** Was $200.
Someone must need these…
“I have two original seat frames with newer cushions for a CJ3a, along with a straight looking rear seat that was homemade. All material is in good shape, just needs some cleaning. I bought them for a project but decided to go a different direction and am just trying to recover my money. $75 for each of the front seats, $200 for all three”
No pics provided.
https://missoula.craigslist.org/pts/d/corvallis-jeep-hard-top/6865714154.html
“Rare hard top for 1954 CJ3B. Will fit 2A model also. Good condition.”
Something different. Looks like a later model wagon grille.
https://www.facebook.com/marketplace/item/757452391262221/
“Grille off of old Jeep – it’s been chromed. $700.00. Or make me a decent offer”
UPDATE: Still Available.
(03/04/2019) Could be great for the right project.
https://www.facebook.com/marketplace/item/392139958241638/
“For sale a pair of Custom aluminum Jeep Willy’s flatfender fenders. Do not know exact years they fit. Came with one of my projects, have been sitting on my shelf for years. Don’t think there made anymore. Super cool”
Jon shared this parts listing. The frame + grille could be a good price.
https://www.facebook.com/marketplace/item/431866627549030/
“3 weather tight pelican cases, all 3 for $100
5 wheel rims for 1942 Willys Jeep $50 each (Don’t appear split rim)
Front and rear springs $50 each
Jeep to bar used on 1942 Willys $100
Original Jeep front grill, not sure of the year, good shape $150 [DJ-5?]
Willys Jeep front grill with front and rear bumper and frame $400”
This has some unusually shaped side windows.
https://nh.craigslist.org/pts/d/stratham-willys-jeep-steel-hardtop-and/6845231666.html
“Old steel top and doors for Willys jeep or Ford gpv. Has some glass missing. It won’t fit mine because it has square back bottom corners and my top edge has a radius. Very solid and perfect for a restored 1/4 ton or your old plow jeep even.($225) I also have a set of soft doors, good frames, canvas is worn but usable as templates.($80) local cash deal only. No help needed. Can measure of needed.Text is best. Thanks.”