- Misc Parts Lot Elkhart, IN $40: https://chicago.craigslist.org/wcl/pts/d/48-willys-engine-trans-parts/6442488217.html
- Engine Parts Lot Elkhart, IN $50: https://southbend.craigslist.org/pts/d/willys-jeep-engine-parts/6429614472.html
- CJ-2A Rim Huron Township, MI $55: https://detroit.craigslist.org/wyn/pts/d/early-cj2a-kelsey-hayes-steel/6436142242.html
- Various Jeep Parts Yuma, AZ: https://yuma.craigslist.org/pts/d/vintage-jeep-parts/6444037698.html
- CJ-2A Parts Honeybrook, PA $1000: https://philadelphia.craigslist.org/cto/d/cj2a-parts/6437967259.html
- Snow plow blade Wynnewood, PA $300: https://philadelphia.craigslist.org/pts/d/willys-jeep-snow-plow-blade/6441924691.html
- Great price on new CJ-2A fenders Chesterland, OH $200: https://cleveland.craigslist.org/pts/d/willys-jeep-flat-fender/6443619642.html
Parts Research Archives
Later Model Heavy Duty Selectro Hubs Brunswick, GA $60/each
Rick spotted these late model Heavy Duty Selectro hubs for sale.
“New 5-bolt front hubs for 1978-1981 Jeep CJ. p/n 5358568H. 3 available. All are unused. 2 are dirty from storage but bearing surfaces are good. $60 each.
Selectro locking hubs for same are also new. $60 each, 2 available.
**$200 for 2 front hubs and 2 locking hubs.**”
https://brunswick.craigslist.org/pts/d/jeep-cj5-cj7-scrambler-hubs/6428039986.html
Parting Out 2 CJ-2As Alvarado, TX
Seller has a variety of parts.
“Here’s more pictures of parts.
Call to work out pricing. Negotiable
I have 2 willys I’m parting out”
https://dallas.craigslist.org/sdf/pts/d/willys-48-cj2-parts/6442127074.html
CJ-3A Soft Top Loma Rica, CA *Status Unknown*
UPDATE: Status Unknown. Was $400.
Appears in good condition.
“For sale complete soft top only couple months old just got the top before summer had it on my 1953 cj3a for a month then took off for summer and wrecked the jeep insurance totalled the jeep now i have a new top no jeep paid almost $900”
CJ-3A Koenig Hardtop Centennial, CO $200
Looks like a good top. Includes doors.
“I have a steel hard Top with Doors for CJ3A will fit a 2A or 3B Top is in a Good condition
I am not sure of Manufacture might be a konig again not sure”
https://denver.craigslist.org/pts/d/willys-cj3a-metal-top/6439562540.html
Koenig? CJ-5 Hardtop Monroe, OR **Status Unknown**
UPDATE: **Status Unknown** Was $500
“I have a hardtop roof with doors and tailgate that fits the early CJ bodies. Also, other various other Jeep parts, including a TH-400 AMC transmission with a Spicer 20 transfer case, a T-86 3 speed Jeep transmission and a large bore spicer 18 transfer case that fits the T-86 transmission. I also have the adapter that marries the T-86 transmission to a 225 Buick V6. There is also an engine to transmission adapter that I’m not familiar with.
Gas tank, $40 each
Front fender, $40
Hardtop roof, doors, tail gate, $500
Transmission, $40
T-case, $40”
Koenig? CJ-5 Hardtop Banks, OR $325
Good luck fitting this on a flat fender without extra hardware.
“Old Jeep top,fits Cj Models 1940’s and up to 1974 Cj 3a,,Cj3a,,,Cj5 ,Came off a Cj 2a or Cj3a ,I Think, all there with all the hardware Too Brackets and Such,,Also have the rear door for the back, not in bad shape not beat up or rusty,Surface rust could use paint,,, a couple of side windows have cracks,Very solid top well Made,,Hard to Find Now Days”
https://portland.craigslist.org/wsc/cto/d/jeep-cj2acj3acj5-metal-top/6415732644.html
Early CJ-2A Windshield Trout Lake, OR $150
It will need some work, but it appears to be an early windshield.
“Will fit Jeep Willys CJ2A. Not the best Condition, but still very usable. If you are a welder you can replace the sheet metal fairly easy, or just run it the way it is!
Has a windshield wiper and motor. Has cracked glass installed. Has the cowl to frame weatherstrip installed. A great option for your wheeler!”
https://portland.craigslist.org/grg/pts/d/willys-cj2a-windshield/6414375604.html
CJ-3B Hardtop Buffalo Grove, IL $250
Looks like a good price.
“This hard top & doors came with my Willys CJ3B and I have decided I won’t be using it. Overall looks like it is in decent shape. Please see the pictures and ask any questions. Located in Buffalo Grove. It is aluminum and very light.”
https://chicago.craigslist.org/nwc/pts/d/cj3-cj3b-willys-sears/6431599213.html
Koenig Model 40 PTO Yahmill, OR **SOLD**
UPDATE: Marty snagged this deal. Was $50.
Maybe some value here if you can get it unstuck.
“I have a 1950’s Willy’s Jeep Koenig Twin Stick Model 40 PTO, ID number WO48-202, WO48-201. It’s completely froze up. However appears to be complete. $50 firm. Give me a call (Leave a message if I don’t answer) or shoot me a text.”
1942? Engine/Tranny/TC Selah, WA $450
UPDATE: As Keith points out, it’s an f-head. But, that looks like a t-84 tranny to me. This could be a good find for someone.
“Selling my 1942 Jeep Willy’s motor, tranny and transfer case. Everything works perfect. Just pulled out cause I had different plans for the Jeep. Motor was rebuilt by R&Q in Selah less than 10k miles ago. Tranny is a 3 speed”
https://yakima.craigslist.org/cto/d/1942-jeep-willys-motor-tranny/6423045498.html
CJ-2A/CJ-3A McMinnville, OR **SOLD**
UPDATE: **SOLD** Was $425.
Top is missing one glass slider for a window. Looks to be a Koenig top.
“Hard top for Willys Jeep 42-52. Windows slide and back hatch opens easily. Good glass in back hatch. Missing glass in 1 slider window.”
CJ-2A Porter & Reed Hardtop Sioux City, IA **SOLD**
UPDATE: **SOLD** Was $400.
It’s a fairly rare top that appears in good condition.
“Full cab with removable doors. Aluminum in good condition for it’s age, not dented or trashed out. The door windows both cracked but are still complete.”
Rollcage for Flattie Maple Valley, Wa **SOLD**
UPDATE: **SOLD** Was $150.
That’s a great price on a roll cage. Few could built it for that price.
“Willys Jeep Flatfender Rollcage
– family-style cage
– added protection
– overhead console light/mount
– 6″X9″ built in speaker enclosures with speakers”
3 Point for Jeep? Columbus, OH $250
Anyone recognize this one?
“3pt blade. Unusual design. May be for willys farm jeep with 3pt. Has jeep style toplink. Haven’t confirmed.”
https://columbus.craigslist.org/grd/d/3pt-blade-tractor-jeep/6403737471.html
Digger & Trencher Parts Storrs, CT **SOLD**
UPDATE: All the Digger and Trencher parts have sold. I’ll leave this up for now, as the breadth of parts still out in the wild might be of interest to someone. I believe Chris McKay also has some trencher parts.
“For Sale , extensive collection of Go For Digger, Auburn and Jeep A Trench related parts. Would be willing to sell whole lot in a package deal with the Auburn Trencher listed, or sell just the parts or sell all parts separately if anyone is looking for specific parts.
There were two NOS 40″ PTO shafts which I believe were correct for the go for digger and trencher units, one of the shafts has been sold. The other one is still available and in great shape with the exception of many years of shelf life, boots are excellent as is shaft ends and tube. Also the one mount pictured for the Dozer blade has been sold and one of the control valve units as well. There is also a Dozer blade and what looks to be the conveyor belt for a Digger for sale too.
I have attached quite a few pics to show whats included in the lot , lots of bearings ,seals ,creeper gears ,arms ,ring gears , speed reducers , and much much more . Everything I have is pictured but if your looking for a small specific part send me a description or picture and I will see if I have it in the small parts bins. As mentioned I would be willing to sell entire lot but you will def need a full size empty truck as there is a lot of it there. I’ll listen to all reasonable offers on the Jeep and the parts lot and return all emails or calls .”
CJ-2A Tub/ Front Clip Winona, MN **SOLD**
UPDATE: SOLD. Was $1000.
This ought to interest someone.
“Here’s the tub and front clip that I had planned to use to restore a 1947 CJ2A. I’ve had this on sale for about a year and I’d like to move it on.
Earlier this year my ad read: CJ2A body tub repaired with some alterations. Tail gate eliminated. Flat fender grill in good shape. Flat fender style hood in bar metal – straight but needs prep and paint. Good for custom build. $1,800 ($2.5K on eBay)
So at this point, I’m dropping my price to $1,000 (about 1/2 what I was asking) and if that’s too much for you, make an offer you’re comfortable with – no problem!
All of these parts are located in Winona, MN and are available for you to stop by and see about anytime.”
PTO / Drum Package Cicero, NY eBay
Gary’s selling this PTO setup. Looks ready to go.
View all the information on eBay
“Up for Auction is a Power Takeoff Package for a Willys CJ2A or CJ3A Jeep. I have owned this for the last 37 years and it is in excellent condition and works perfectly. The auction includes the following items shown in the photos:
The Power Takeoff [Transmission PTO]
The PTO Leather Shift Boot with steel square retaining bracket
PTO Drive Shaft
Rear Gear box [Farm Box]
Flat Belt Pulley [Drum] Attachment
Flat Belt Pulley [14 feet long]
King Seeley Servo Governor with mounting bracket
Governor drive belt [fan belt]
Governor to Carburetor linkage
Continue reading
CJ-2A Parts Neptune, NJ
Gus shared these parts for sale.
“4 Rims $110 (EACH) Orginal rims all powder coating.
3 Tires $110 (EACH) Brand new correct firestone tires.
3 Manafolds $95 one has a crack
2 L-head Engine Heads $200 (EACH)
OUTER STEERING COLUMN TUBES $35
Tie Rod complete assembly good shape $75
TRANSMISSION TOP SHIFTER $80
COMING SOON
2 Orginal COOPER Radiator
2 Transmission bell housings
2Transmissions
2 Flywheels
Rear tow hitch frame
Go devil engine 4 Cylinder ran a year ago
Cleaner Picture coming soon”
https://jerseyshore.craigslist.org/cto/d/cj2a-parts/6411308581.html
CJ-2A Bumper Weight Colchester, VT $100
Craig spotted this great price on a weight.
“Selling a front bumper counter weight for Willys CJ farm jeeps.”
https://vermont.craigslist.org/pts/d/willys-cj-farm-jeep-front/6407629362.html
M-677 Plates and Other Parts Gibsonburg, OH
Seller has some interesting parts, including T-96 gears (useful for DJ-3As, trucks, Jeepsters, or wagons), a set of M-677 data plates, Warn hubs, and other parts.
“Let me know what youre interested in. Email me with any questions. Some things are NOS and some are never used genuine parts and some are take offs. I have a Whole box of T-96 parts and a good set of warn manual hubs.”
https://toledo.craigslist.org/pts/d/jeep-kaiser-willys/6402734227.html
Newgren Lift & PTO Rogers, MN **SOLD**
UPDATE: **SOLD** Was $1000.
Seller won’t ship.
“I have a Newgren lift and PTO setup for jeeps for sale. The lift has the cylinder and adjusters but no arms, controls or tank. As the pictures show, the adjuster bolts need to be straightened. The PTO is complete as far as I know, with an extra Dana 18H included. I will not ship this, but could deliver for mileage. I have a CJ3B that this was with, but it came off a CJ2A. Hasn’t been used since the late 60’s when it was bought.”
2 Bumper Weights Marengo, IL $250
UPDATE: Appear to be still available.
“Have 2 250 pound weights for Willy’s jeep
$250 for set”
https://rockford.craigslist.org/pts/d/willys-jeep-weights/6356627429.html
Pre-71 CJ-5 Fiberglass Fenders Muskegon, MI $100
Look like a good price. The also have fender skirts.
“1955-71 CJ5 short fiberglass fenders, good condition, in patina, no cracks or holes. Will fit later CJ5s with short hood setup.”
https://muskegon.craigslist.org/pts/d/cj5-short-fiberglass-fenders/6388881470.html
Wagon PTOs and a Winch Mulino, OR $250
Bill spotted this good looking deal.
“Took off willys wagon with 20 transfer case 2 gear boxes winch with shaft drive”