UPDATE: **SOLD** Was $200.
(10/28/2017) Needs some work.
“I have what looks like a Meyers hardtop for a cj6. It has been disassembled and will need a full rebuild, but it is all there, including doors.”
UPDATE: **SOLD** Was $200.
(10/28/2017) Needs some work.
“I have what looks like a Meyers hardtop for a cj6. It has been disassembled and will need a full rebuild, but it is all there, including doors.”
Needs some glass. Seller also has Koenig PTO stuff for sale.
“The top is in good solid shape. It could use sand blasting and paint. The doors are complete and ready to install. It could use glass. Good straight and solid top. I also have a complete Koenig PTO winch, pto, and driveshafts for sale for $500.”
https://jackson.craigslist.org/pts/d/willys-cj3a-or-cj3b-full-hard/6376505145.html
UPDATE: **SOLD** Was $150.
Bill spotted this. Maybe it can be freed up?
“I have a 1950’s Willy’s Jeep Koenig Twin Stick Model 40 PTO, ID number WO48-202, WO48-201. It’s completely froze up. However appears to be complete. $150 firm.”
Bill spotted this deal.
“Took off willys wagon with 20 transfer case 2 gear boxes winch with shaft drive”
UPDATE: **SOLD** Was $250.
Might be worth a look.
“Top in good shape with doors and the hinges.
Needs a couple pieces of glass.”
Seller has a variety of parts.
https://spokane.craigslist.org/pts/d/many-willys-cj2a-parts/6370319571.html
“I have a few Jeep parts from my collection that I’ve decided to sell. I’d keep them, but I don’t have enough space to store everything and I need cash to finish my shop. I’ll do my best to keep the list current, and I may add more as well. Take your pick:
Original Early CJ2A Windsheild: $300 – in good shape with inner frame. Inner frame is rusted out in a few spots but the outer frame is solid.
Reproduction Tailgate (no stamping): $100 – almost like new, paint is faded
Early CJ2A Body & Front Clip – 1946: $400 – floor pans are gone, covered with flat plate. Underside in general is rough. Has a few holes cut in it, needs a good restoration. Hood and grill are fairly straight, fenders need some repairs around the supports.
Dana 27 & 41 axles: $300 a pair
Continue reading
Needs work.
“I have a willys body that needs work
I have been working on it and just decided to buy a new one don’t have the time to mess with repairing it
will come with extra parts to repair it”
https://portland.craigslist.org/mlt/pts/d/gpw-willys-jeep-body/6372573098.html
UPDATE: **SOLD** Was $1000.
(09/13/2017) Craig shared this one. Seller is including a snow plow and front counter weight as well. Looks like a good price.
“1957 Jeep A Trench trencher,snow plow and front counter weight. Will sell all together or separately”
Galen’s looking to sell this pan.
“For Sale & Offering FREE DELIVERY in the Northwest Arkansas/Southwest Missouri/Northeast Oklahoma area!
$750 OBO
New Omix-ADA 12007.04 Replacement Front Floor Panel with removable Transmission center cover.
Fits 1952-1971 M38A1, 1955-1969 CJ5, 1955-1969 CJ6 (does not fit 1970-1975 CJ5 Rear Gas Fill Tubs)”
https://fayar.craigslist.org/pts/d/jeep-replacement-floor-pan/6368202514.html
Maybe someone can use?
“$200.00 obo for rat rod or ? has rust to clean up. Tub only.”
https://stlouis.craigslist.org/pts/d/1948-jeep-tub-for-rat-rod/6362575942.html
UPDATE: **SOLD** Was No Price.
Appears to have some rust.
“1942 Willys Jeep body. Includes tub, window frame, fenders and hood. I was going to use it for a project but decided to go another direction”
Doug spotted this one. Seller also has an FC-150 rear weight for sale, too.
“Cast Iron wieght that mounts to the front of a pre 1971 Jeep CJ. Adds 150 pounds to the front of the vehicle to enhance pulling traction. Rare factory special equipment. 100 OBO . This things heavy! will not ship. I also have a rear weight for a fc150.”
Various parts (variety of pics on Craigslist ad).
https://spokane.craigslist.org/pts/d/many-willys-cj2a-parts/6366475976.html
“I have a few Jeep parts from my collection that I’ve decided to sell. I’d keep them, but I don’t have enough space to store everything and I need cash to finish my shop. I’ll do my best to keep the list current, and I may add more as well. Take your pick:
Original Early CJ2A Windsheild: $400 – in good shape with inner frame. Inner frame is rusted out in a few spots but the outer frame is solid.
Reproduction Tailgate (no stamping): $150 – almost like new, paint is faded
Early CJ2A Body & Front Clip – 1946: $500 – floor pans are gone, covered with flat plate. Underside in general is rough. Has a few holes cut in it, needs a good restoration. Hood and grill are fairly straight, fenders need some repairs around the supports.
Dana 27 & 41 axles: $300 a pair
Frame and Springs: $300 – from a 1947 CJ 2A. It’s pretty rough, bubba welding all over the front end, but nothing a competent welder cant fix. Looks like it had a plow put on it at some point. Coated in a dull red finish that has protected it from rust over the years. Rear half is fairly solid with the stock draw bar. Axles sold separately. No Title.
Chrome Wheels: $100 – Set of 4, 5 on 5.5 pattern with large opening for the big early CJ hubs. There is surface rust, and the tires died 30 years ago (but the tubes hold air!). No bent rims. 1 hubcap.
CJ 5 Rollcage: $150 – Front half is bolted on, the roll bar would work on early CJs as well.
Carburetors: $75 each. I have a Carter and 2 Solex’s.
Fuel, Water, & Oil Pumps $25 each.
Oil Filter Brackets $25 each.”
I’m sure someone can use this.
“Complete MB Body, Brand New, never mounted, still in Primer.
Includes Tub, fenders, Hood, Grill, Windshield, Bumperettes, top bows, and spare tire holder.”
https://cincinnati.craigslist.org/cto/d/complete-new-willys-mb-body/6362368158.html
UPDATE: **SOLD** Was $75.
Looks like a fair price.
“Aluminum top for Willys CJ-2A Jeep…will fit MB/GPW…probably fit a CJ-3A and CJ-3B too…includes original back hatch/door…also includes a pair of front doors that could be modified to fit…just in time for deer season !!! $75…has been removed from the Jeep, Jeep has been sold”
These don’t pop up often.
“If it’s listed it’s still for sale
First come first serve. Will not hold or any b.s.
1955-1969 jeep CJ-5 ventilator windshield in good condition.
Only rust is on glass divider.
Electric wipers
All hardware is on it.
It came off of 1967 v-6 CJ-5
Will fit first year 1955 -1970ish
These are hard to find, and I’m a little sad to sell it but if you have the $ it’s yours.”
I’m sure someone could use these.
“1951 Willys Jeep parts – hood,front fenders,grill,and tailgate.”
https://york.craigslist.org/pts/d/willys-jeep-parts/6357359928.html
UPDATE: **SOLD**
“Snow plow with attachments; hydraulic pump; and controls to fit Willys CJ2A and CJ3. Also CJ2A gearing and service manual.”
UPDATE: **SOLD** Was $300.
This is a good price. It also includes 2 rims.
“2 dj front axels
Also 2 4 bolt wheels”
UPDATE: **SOLD**… Was $150.
Looks like a CJ-5 top, but I can’t tell for sure.
“Hard top and doors is for 52 Willy in fair condition minor rust”
I believe this is a Koenig bed extender. It has the same supports and channels as this one.
“Willys bed extention in good shape. No rust. $500 obo.”
https://seattle.craigslist.org/see/pts/d/willys-jeep-bed-extention/6348880863.html
UPDATE: **SOLD** Was $150.
“Willys MB, CJ2A, Ford GPW parts lot.
Glove box sections, windshield frame, quarter panel, front frame horns, patch panels parts.
Please send your NAME and TEXT phone number if you want me to contact you.
Selling all as one lot $150 OBO”
UPDATE: **SOLD** Was $525.
Dan spotted this rare camper shell.
“Willys Jeep Pick Up Aluminum Camper Shell. I had it on my 1957 Willys Jeep Pick Up.
Standard Willys Jeep trucks had the same cabs and beds from about 1948 to 1962 or so. It would fit these years.
Made by ” Caravan Co, Reno Nevada” Has a steel rack with rollers for a canoe. Strong build.
Needs 1 flat glass side window. Some rust on the top roof vent. Small dings etc. as seen. NO BIG DENTS.
Good original condition. Would polish out or can take CAMO PAINT.
Some photos of it on the truck are black before it was cleaned. Photos off of the truck are as it is today.
Changed the look of the truck a lot. Don’t see many of them out there…”