UPDATE: **SOLD** Was $3000.
Plow truck with updated engine.
“1953 Willys pickup with plow as seen in photos. 283 Chevy engine”
UPDATE: **SOLD** Was $3000.
Plow truck with updated engine.
“1953 Willys pickup with plow as seen in photos. 283 Chevy engine”
UPDATE: **SOLD** Was $3500.
Jim’s got these two trucks for sale. The running truck includes a Warn OD.
“1961 Jeep 4×4,L-226 6 cylinder with factory Waren O/D and factory lock out hubs,also has factory heater and radio( missing).Bed has rust through, but cab only has surface rust.Motor is complete but will not turn over,. also have a 1960 that is complete but needs restoring that goes with the deal”
UPDATE: **SOLD** Was $2200.
TJ shared this through Facebook. It’s listed on FB’s marketplace. It runs, but has a knock.
“This 1957 Jeep pickup has a Flathead 6 cylinder it runs but has a knock all original running gear extra engine in Parts in the pickup bed original interior would be a really cool unit also can get a four wheel drive S15 running driving truck that way you would have disc brakes new running gear etc for $100”
UPDATE: Still Available.
(11/07/2017) Bill spotted this custom truck.
“Custom built Willy’s jeep pickup with extended cab so a full size person can comfortably sit inside!
Features:
Custom extended cab configuration
Professionally fabricated aluminum flat bed
ford 9″ rear axle
dana 44 front axle
Chevy 4.3L v6 motor
New custom interior
Fresh paint
As you can see by the pictures this is a mint condition. From the time of the recent work it has had very limited miles put on.”
https://boise.craigslist.org/cto/d/1970s-willys-truck-extended/6408070666.html
UPDATE: **SOLD** Was $2000.
Lew shared this one.
“$2000!! Come get it!! Project, fresh small block , turns over just needs pully configuration, plugs and wires, fuel tank. Willing to trade for a camp trailer of equal or lesser value plus cash, guns plus cash, s10 or sonoma 2wd.”
UPDATE: **SOLD** Was $5000.
(04/14/2017) Craig shared this good looking truck.
“For sale only cash 1958 Willys pickup sitting on a 99 s10 4 cylinder automatic runs and drives good”
UPDATE: **Status Unknown** Was $11,800
(06/02/2017) Nice looking truck. The most unusual aspect is the location of the gauge panel under the passenger side glove box.
“CLASSIC 1948 WILLYS TRUCK (Jeep Style) REBUILT TOP TO BOTTOM ! – 1994 S10 Chassis-4.3 Vortec 6 Cylinder AUTOMATIC-AIR CONDITIONING $11,800”
UPDATE: **Status Unknown** Was $8500.
Has a few mods. Appears solid.
“1958 Willys truck. Has the 226 Super hurricane with 3 speed transmission. Rebuilt doors with glass and door panels. New paint, New Goodyear tires, and really nice flatbed. This is a very solid truck.”
UPDATE: **Status Unknown** Was $1250.
It’s a plow truck.
“1962 Willys. Has been a yard/plow truck for many years on my property. Runs great. Obviously not Road legal but is great around the property to haul branches, firewood or whatever. Plows snow very very well. Very strong old truck.
Huricane 6 motor, 3spd manual, 55,643 miles, Fisher Speed Cast plow, 2 sets of wheels/tires with chains on rear of one set. Brand new battery last week and seasonal oil change/tune up done. Ready to plow someone else’s yard for many years.
Bought tractor with snowblower and just never use jeep anymore”
The engine topper is quirky addition.
“1952 jeep willys ratrod. Custom. 360 v8 with 350 turbo trans. Must see to appreciate. Sell for $7500 Or willing to trade for something cool of same value.”
https://stlouis.craigslist.org/cto/d/52-willys-ratrod/6397173231.html
Craig shared this plow truck with a flat bed.
“2000 miles on rebuilt engine
New brakes
Strong runner and driver
Manual turn plow included”
https://rochester.craigslist.org/cto/d/1960-willys-flatbed-truck/6393639455.html
Is this an early Watson Hub? Something else? I don’t recognize it. It is on a 1952 truck for sale in Los Angeles right now.
UPDATE: Still Available.
(10/21/2017) Craig shared this pair.
“I am selling both my Willy’s Truck and Wagon. Truck is a 53′ 4×4 with a 1963 Ford 6 cyl. Has original trans, transfer case and overdrive, Truck came from CA. solid frame and body. The Wagon is 1960 4×4, has original super Sonic 6-226, electronic ignition. Both vehicles run, drive and stop. Both are 12V. Both vehicles need floors where your feet rest. All lights and heaters work on both. Asking $4700 for Truck and $6300 for wagon”
https://cincinnati.craigslist.org/cto/d/1960-willys-wagon-4×4/6385100571.html
https://cincinnati.craigslist.org/cto/d/willys-truck-1953/6385067754.html
Runs and plows.
“1953 Willys pickup with plow as seen in photos. 283 Chevy engine”
https://binghamton.craigslist.org/cto/d/1953-willys-pickup-with-plow/6377012591.html
UPDATE: Pics now provided. It was listed as a 1948, the tub is a 3B.
“I’m posting for someone a 1948 willys jeep project the jeep has no title good shape like I said posting for someone so if interested calls only no text asking”
https://pittsburgh.craigslist.org/cto/d/1948-willy-jeep/6368804946.html
No pics provided.
“1952 Willys Stakebed with lots of extra parts. Runs good. V6 buick motor with original 4 wheel drive running gear”
https://mohave.craigslist.org/cto/d/1952-willys-stakebed/6370123640.html
UPDATE: **SOLD** Was $11,500:
This looks nice.
“56 Willy’s flat bed dump. Rebuilt hurricane 6, “Dump O Magic” w rebuilt cylinders. New brakes, springs over drive. Brought truck up from New Mexico a few years ago.”
UPDATE: Unclear if Rudy still needs parts or not.
Rudy recently purchased this National Park Service fire truck out of Fort Collins, Colorado. He wants to restore it, but needs some help locating parts and information about it. If anyone knows anything or has some parts, please contact him at rudyskfparts @ sbcglobal.net (remove spaces around the @).
“Looking for the needle in a hay stack but it’s worth a shot as not many Willys fire trucks out there. Looking for the pump, tank, hose reel and any other items that may have come off this truck over the years. Has a great history serving in the National Park Service and want to bring it back to it’s former glory but will need some help.
This was purchased in 1993 at a Government surplus auction by Mr. Bender of Fort Collins at which time it was a functioning fire truck but soon sold it to a Mr. Kleeberg who at the time owned a wrecking yard for years in Fort Collins. Not much is known after this point as Mr. Kleeberg passed away and little is known what happened to the missing parts. If anyone knows any history and /or what happened to any of the parts specific to this truck I would be interested in purchasing any parts to help restore the truck. Will gladly pay a finders fee that leads to the purchase of any parts as well.
First two pictures are of the truck needing the parts and the last four are of a similar trucks and what the parts would look like. The truck was built by Bay City Fire Trucks in Bay City Michigan.”
UPDATE: **SOLD** Was $3400.
This is a project, but the body appears in good shape. Seller provides lots of details.
“Read description carefully, most of the info you need is there- I am busy and don’t have time for emails from people who are too lazy to read.
This truck has great potential, I’ve had it for years but I don’t have the time to give it the attention it deserves. Unlike 90% of the Willys trucks out there, this is one of the few that I would restore as it is fairly rare. Beaten, and abused Willys trucks are a dime a dozen, but this one has more potential than most, as is an early “flatnose” 1947, and may be one of the earliest surviving 4×4 civilian pickup trucks in the United States (excluding the Power Wagon truck, which was the same as the military version).
The truck looks much better in pics than in person. I did a quick paint job of the original Michigan Yellow as when I got this truck the PO had sanded the body to bare metal, then abandoned the project. I didn’t do any body work, nothing hidden or bad surprises. With the exception of the bed floor (rust) tranny tunnel (cut to fit PTO) and grill (backside cut to fit motor) the body is pretty good. The doors are the straightest I have ever seen, the cab is very good, the fenders good except a few holes where turn signals were mounted (these trucks did not come with turn signals). Other than a small bolt hole on door (for a mirror), no bondo or bodywork was seen. What you see is what you get. Solid metal.
The motor is a 1965 5-bolt 289. It runs, drives and doesn’t smoke, but I don’t think the motor is that tight as the oil pressure drops pretty low on longer drives. The motor is the same code as the Cobra and mustang HP 289, but it is not the HP. I’m 99% the motor could be fixed by replacing the bottom bearings, or you could pull the motor and sell it for enough money to buy a replacement. These motors can go for a fair amount of money. Really a great motor but needs a bigger radiator.
The Koenig PTO works.
Brand new vintage looking Deep Lug mud tires with hard-to -find 16″ Willys wheels. over 1k in the wheels.
Has a later model heater that works well, but the install wasn’t the best.
the bed is straight, but has holes on the floor and isn’t the bed that originally came with the truck. The easy fix is to weld a later-model floor in place of the original, as you may never find a bed that hasn’t been abused hauling rock or firewood.
The tailgate is salvageable, but not the greatest. Still, like the bed, these things were workhorses, and nearly always abused on a ranch or farm. Straight tailgates with the “WO” (Willys-Overland) are hard to find.
Most of the glass and rubber, including the windshield are new. the windshield gasket alone costs over $300.
The brakes were redone just before I got the truck. Need bleeding and adjustment.
Steering is sketchy. Bushings and basic maintenance should make it drivable-BUT, if you haven’t had the pleasure of driving something this old, please understand these are a bitch to drive! This is a manly-man truck that takes skill and patience to drive. You do not want to commute to work everyday in it, and it is not safe to drive on the highway.
Bill of Sale only. Not stolen!”
UPDATE: **SOLD** Was No Price.
Seller has a couple parts trucks.
“the gray one is complete no rust and in dicent shape 2000 the green one is a parts truck 800 I have a spare super hurricane turns over has compression a t90 trans and a pto box”
UPDATE: Price dropped to $9500.
(9/21/2017) Has an interesting look.
“1962 Willys set on Chevy chassis 305 ci. 700R4 trans.new suspension tires interior great everyday driver call for more info”
https://erie.craigslist.org/cto/d/willy-pickup/6353059063.html
UPDATE: **SOLD** Was $8500.
Has a variety of updates.
“Chevy 383 stroker
New radiator, shroud and fan
New high output water pump
New MSD distributor
New pugs and wires
New brake booster and shoes
K&N air filter
Just rebuilt turbo 350 transmission
New front seal in transfer case
Optima yellow top
9 bolt rear
44 front with limited slip
Power steering and power brakes
Aluminum heads re-surfaced
Newer Nitto 37 M/T
Truck is fully bed coated
No Dents or Bad Rust
Street legal”
UPDATE: **SOLD** Was $2000.
“1960 Jeep Willy’s pick for sale. Antique truck, needs to be restored. Selling it as is. Best used for parts. 2000 Or best offer. Come grab it.”
UPDATE: Still Available.
(09/30/2017) Looks in good shape. Has a couple mods on the dash.
“49 WILLYS IN GREAT SHAPE. THIS TRUCK IS SOLID. A MUST SEE. LEAVE A MESSAGE AND I WILL GET BACK TO YOU.”
https://miami.craigslist.org/mdc/cto/d/1949-willys-pickup-4×4/6291547648.html
UPDATE: Still Available.
(03/17/2016) Seller will entertain offers.
https://sanantonio.craigslist.org/cto/d/classic-rat-rod/6293807380.html
“**One of a kind 1950 Jeep Willys Rat Rod**
I am selling my fully customized Jeep Willys Rat Rod which has reviewed a lot of attention. Below is a list of everything equipped on this beautiful pickup.
Motor:
-Chevy 350 bored 30 over with cam
-Aftermarket intake
-4 barrel Edelbrock Carburetor
-Electric water pump
-Electric Fan
-Aluminum Radiator
-Shorty Headers
-Custom Exhaust
-Fuel Cell
Continue reading