emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Looks pretty solid. Needs an engine.
“46 WILLYS CJ2A NEEDS ENGINE OTHER RUNNING GEAR IS STILL IN PLACE.
CLEAR TITLE IN HAND”
http://westslope.craigslist.org/cto/5825946086.html
Has plexiglass side windows and a custom dash.
“1950 Willys jeepster. It has a smallblock 350 with a 400 turbo trans. Motor has been gone truth and runs great the carb just needs to be a little more adjusted but it does fire up and run. Fine.It has a newer convertible top and boot for when the top is down the side Windows are plexiglass that slide into place. asking $12,000 obo”
http://toledo.craigslist.org/cto/5817717769.html
UPDATE: **SOLD** Was $2995.
Hasn’t been run in two years.
“Rare 1959 FC 150 Willys Jeep. Original flat 4 engine. I have owned her since 2001. She ran fine and I drove her up until 2014. 3 speed tranny with Hi/Lo mode. She is red/white. She is in rough shape now, has body cancer, doors and windows not working, and more. She has not been run in two years so I can’t vouch for anything working. All offers will be considered. Any questions please contact Jeff.”
It’s got some updates. No title.
“Nice rust-free lifted Jeep W/O TITLE for sale on Ebay right now. Other pictures on Ebay. Starting bid $2150 and no reserve after that.”
http://westslope.craigslist.org/cto/5824338813.html
Lacks some detail finishing, such as the lightly rusted gauges and lack of a parking brake for starters. Has a rear PTO with drum pulley.
“1948 Willys CJ Jeep Military restored with power take off PTO”
http://jacksonville.craigslist.org/ctd/5823241410.html
UPDATE: Price dropped to $950.
(09/07/2016) Not sure how much value is here.
“1954 Willy’s has no motor or tranny.
1961 Willy’s has 3B motor, no carb, no starter.
For further questions.”
http://kansascity.craigslist.org/cto/5809331222.html
UPDATE: **SOLD** Was $800.
Looks ready to install.
“1 . Ramsey Winch Unit was overhauled. Ready for installation. Asking $350.00 negotiable.
2. Willys Jeep DUAL OUT POWER TAKE OFF. asking $250.00 NEGOTIABLE
3. Transfer case spicer. Like new.$300.00 Negotiable
SAVINGS-All three items available together for $800.00”
UPDATE: **Status Unknown** Was $600.
Not sure how much value is here.
“1960s jeep willy old army jeep original motor and tranny and everything as far as I kno was running 15 years ago been parked for a long time missing starter and needs a lot of work 600 Obo no low ball”
UPDATE: **SOLD** Was Make Offer.
Seller wrote that this jeep is “all original” in the title.
“This a collector ! Need it gone hit me up with offers, customed for hunting season!”
On Monday I spent some time testing the engine. After lightly sanding the points, the spark began to work, but the engine still didn’t start. I took a second look at the fuel pump and discovered it in fact wasn’t working. When I checked the bolts to remove it I discovered that the bolts were snug, but not tightened. So, someone at some point looked at the fuel pump.
After further examining the non-stock solex carb, I then removed it (I plan to sell it anyway). That’s when I noticed there was a pool of varnish/gas along the bottom of the intake. I decided I would get all that cleaned up before trying to restart it.
I next turned to the grille. The first two photos show how bad the grille was bent. I can’t image what they hit. Thankfully, the radiator seems to be fine.
Using a variety of strategies, I flattened the grille and straightened the edges. One side smoothed out quickly. In the pic below, you can see the right side too a little extra bending to come out correctly.
Here’s the final result. I’m pleased.
I will still have to repair both sides of the grille where it mounts to the bottom mount. I haven’t decided how I was to repair those areas. Here’s the right side where it mounts to the frame. As you can see, the metal was cracked.
We returned to Pasco late yesterday. I won’t be going back to Seattle until after Halloween, so I brought back a box of goodies to work on.
Tom spotted this Jeep knife kit for sale.
“This is a vintage Jeeps advertising knife kit made by Imperial. It comes with five interchangeable tools, the instructions, and the original vinyl case. The case and the four tools stored loose are soiled and will need cleaning if you choose. The knife itself is in excellent condition. The imitation pearl handle doesn’t have a single chip, scratch or crack. The knife blade has the original sharp factory edge.”
View all the information on eBay
Nice looking wagon.
“NICE SO CAL CAR
WELL BUILT AND SOLID CAR
383 STROKER CHEVY
ALL STEEL
CHEVY RUNNING GEAR
CUSTOM INTERIOR
CUSTOM PAINT”
http://seattle.craigslist.org/tac/cto/5822159267.html
UPDATE: **Status Unknown**
The seller has three trucks and one CJ-2A for sale.
“I have several Willys pickups for sale and a nice project CJ2A. Also a nice 68 International 3/4 ton pickup, a 73 IHC 4 x 4 with only 72,000 miles and a 98 Dodge pickup I’ve had for a couple years, nice pickup, be a great ranch truck, hunting truck, etc.
Thinning the herd! 51 Willys Pickup, Ford Flathead, nice project, needs restoration but solid and complete. $2250
48 Willys CJ2A, nice project, complete with cab, $2250 obo.
Several other Willys pickups & parts:
An early 50’s complete pickup, missing the tailgate, has the 4 cylinder F head, very cool dual spotlights, etc. It’s a project but a worthy one.
Early 50’s Willys project, cab and chassis, on rubber, no box or back fenders, engine is complete and should run, no radiator, missing a few other parts but a good project or parts pickup. $750
Early 50’s Pickup cab, probably the nicest one you’ve ever seen, solid floors, good doors, good glass, far easier and cheaper to replace your battered and banged up old cab with this one for $500
Continue reading
UPDATE: **SOLD** Was $1400.
Seller lists this as a 3B, but it looks like a CJ-5. Looks like there’s value here.
“956 Willys CJ3B. This jeep has a 73 pinto engine swap. Pretty classic swap. These engines are pretty high torque, so they’re great for hills. Entire break system has been rebuilt. New clutch. 1 year old battery. Leather top and doors. 33’s I believe. I have 5 wheels and tires.
Currently the jeep is at my transmission shop with the transmission pulled. All it needs is a new clutch fork. Ive owned for 2 years and had lots of fun. Engine runs strong. Climbs hills.
I love this jeep, but I have a set of twins on the way, and unfortunately just won’t have the time or spare cash. $1400 OBO”
I wonder if that hood bump is left over from a previous engine? I don’t see the current engine requiring it.
“Chevy 350 with a T 10 four speed manual transmission. Very clean and has been garaged . Everything works. Will trade”
http://seattle.craigslist.org/see/cto/5822908476.html
UPDATE: **SOLD**
They are pics about the 2 very hard to find Naco’s I have for sale for CJ2A. they don’t fit to jeepster, station wagon and panel delivery.
* 1 NOS CJ2A Naco complete in perfect shape, never bolted, asking 500dol + 50dol shipping charge, insured.
* 1 NOS CJ2A Naco in perfect condition, never bolted without glass, asking 400dol + 50dol shipping charge insured.
UPDATE: Price dropped to $7000.
(09/04/2016) Could be a solid M-38.
“For Sale 1951 Jeep Willys purchased originally from United States Military.
Runs excellent for 70 year old vehicle, new tires rebuilt engine and transmission.
3 speed manual, comes with extra tail gate, current registration.”
http://sandiego.craigslist.org/csd/cto/5778712091.html
It needs a new parking light lens at the very least. No description provided.
http://losangeles.craigslist.org/lgb/cto/5821092483.html
UPDATE: Was $5500. **SOLD**
Has some wide bumpers.
“1943 ww2 GPW willy jeep 4wd still works great . 3 speed Comes with replica 50 M2 tires and wheels are brand new. Runs good. drive able.. ”
UPDATE: Was $2750. **SOLD**
“This Willys has a oringal running gear
And a 350 Chevy motor
Good tires
Needs carburetor rebuilt”
UPDATE: **SOLD** Was make offer.
Jim spotted this project. Some assembly required.
“This is a 1947 Willys CJ2A. It is complete accept for the lack of body panels. It has a dauntless V6 out of a later Jeepster Commando. Would make a great project if you have a tub. Make an offer”
This has a fiberglass body. It’s listed as a high hood, but it’s obviously a low hood.
“46 Fiberglass Willy’s high hood body with thousands done in frame mounted full cage tube work. Custom safari top, half doors, fully hard top. Frame stretched and plated to get 100″ wheelbase. LS Motor mounts, racing bucket seats with bench rear seat, seat belts, nice heating system setup, has custom gauges and switches. I have Washington Classic plates for this and clear Washington state title. A lot of work done just needs motor and running gear to finish.
Also have pair of Wagoneer D44 axles front and rear with springs I can throw in for $500 more if interested.”
http://portland.craigslist.org/clk/cto/5820294652.html
UPDATE: **SOLD** Was $5000.
Clearly, not all original.
“For sale a nice 1947 Jeep Willys, all original. Upper end rebuilt 5-6 years ago. Rear axle changed out.”
UPDATE: Price dropped to $2500.
Sale includes a 1996 truck as well.
“Near rust free 70 yr old 4×4 jeep pickup ..has currently a hurricane 6 cylinder(needs starter)price also includes a1997 zr2 chassis I had planned setting jeep on that chassis…price is firm with or without zr2…clear clean title…delivery available …leave contact number if interested….thank u”
http://bellingham.craigslist.org/cto/5939980980.html
UPDATE: Still Available.
(09/21/2016) I thought this was a stock M-38A1 until I spotted the engine. Still would make a fine parade jeep.
“Converted to 12v: Ford 3.2 litre 4 cylinder motor. In great running condition, all major maintenance items recently done, i.e.:
* new timing belt
* brakes overhauled
* transmission and transfer case overhaul w/ new seals
* in the past two years: 5 new tires (7.50×16 NDT, E10 spec), new leaf springs, new shocks, radiator, muffler, fuel pump, etc. (have all mechanical maintenance & parts receipts)
* 2″ hitch receiver (still have original)
* tow bar included”
http://fresno.craigslist.org/cto/5790354409.html
