UPDATE: I was quoted $1200 in early 2016.
“Jeeps and Willy’s parts and vehicles at Dick’s U-Pull-It Auto Wrecking in Spanaway. Check out the inventory and pricing at www.dicksupullit.com”
UPDATE: I was quoted $1200 in early 2016.
“Jeeps and Willy’s parts and vehicles at Dick’s U-Pull-It Auto Wrecking in Spanaway. Check out the inventory and pricing at www.dicksupullit.com”
UPDATE: Price dropped to $8,500
(11/16/2015) Appears to have a dash handle on the outside of the body.
“!948 willys CJ2A in excellent shape…stored for years..Runs..drives….gas tank needs a little cleaning from sitting. Stored indoors. Flathead 4 all original…has been restored. price is firm!!!!!!”
UPDATE: Glenn shared this pic of restored Mahl Jeep Loader. It’s located near Minneapolis.
ORIGINAL POST FROM 2012:
There appears to be an article about the Mahl Loader in the 1949 Municipal Journal & Engineer, Volume 80, but I can’t read the whole article. Farm Implement News, Volume 70 page 149, from 1949 also has an article, again I can’t read the whole thing.
UPDATE: **SOLD** Was $5000.
“Built on a 1973 CJ5. This is a purpose-built ice racer that runs great and needs nothing. Buy it today and go race it this weekend.
*Small block Chevy 350 with Roller Rockers, with high performance cam, high performance ignition, headers and new carborator (recent engine work done by Western Engine with lots of receipts) Engine is worth $5,000 alone.
*Turbo 350 automatic transmission
*Roll cage/racing seats with harnesses
*Fuel cell
*Battery shut off switch
*Adjustable coil over shocks
This is a Hot Rod in a Jeep! It is a purpose-built ice racer; no title or registration. It passed tec and is stickered for the “Our Gang Ice Racing” season for 2016 on Georgetown Lake. I was planning to race this season, but my schedule has changed and I have to work weekends. My loss; your gain. ”
This might be worth a look.Whether new or rebuilt, the engine looks in good shape.
“I have this 58 willys jeep been working on for a few years I have rebuilt the drive line completely , had a new F head motor in the crate when I got it , new carb , all new bearings and seals ,gears in transmission and transfer case installed everything after rebuild new clutch too with throw out bearing ,too much to list, had new breaks put on by previous owner body has dents but nothing major and there was very little rust on body and frame is rust free , new warn hubs everything works as should and probably lots more done to this”
UPDATE: **SOLD** Was $6800.
Looks like the body is on another chassis.
“1956 Jeep Willy’s up dated to fuel injection, V8, 5.2 engine. Registered and tagged. no need for smog. Registered as a Willy’s Jeep. This is a bad ass ride. A lot of work went into this, so please come test drive you wont be disappointed, call”
Looks solid.
“Willys Jeep CJ3B 1953. Runs like a top. Body off restoration 1000 miles ago. Great WWII era civilian utility vehicle painted to look like the military version. First year of new Willys F-head “Hurricane” engine…producing 75 hp. 36% more than the 55 hp produced by the previous flat head “Go Devil” Willys Jeep engine. Motor just rebuilt. Everything works like new.”
Mitch has the following items for sale. No pics of the chassis just yet. $500 for the tub, $500 for the frame and axels, and $500 for the rest. Call him at 9546617279 or email mfgraf@gmail.com
“I have for sale a nice, solid, straight and rust free rolling chassis from a 1955 Jeep M38A-1. Included as part of the chassis are original Dana 44 & 25 axle assemblies with 5.38 gear ratios and open differentials, suspension, some steering linkage and good steel brake lines. The OEM wheels/tires are NOT INCLUDED so arrangements would need to be made. Also included is an original M38A-1 tub which has been media blasted and bare metal, (it is useable but requires repair primarily in the floor area), original T90/Spicer 18 transmission/transfer case assembly, T90/Spicer 20 transmission/transfer case assembly with SB Chevy transmission adapter, OEM M38A-1 driveshafts, nice early CJ-5 hood and grill.”
This may have some value.
“Willys project or parts”
Not sure there is much value here. It’s listed as a 1943 MB.
“Jeep for sale or trade for camper or truck has 2 grills, hood, windshield and a corvette motor turns over doesn’t start needs a timing chain”
UPDATE: **SOLD** Was $4500
Doesn’t include engine.
“54′ Willys project; has been in our family for 50 years. Has been in the garage for 34 years.
No motor, doors or hood.”
UPDATE: Still Available.
(01/19/2016) Looks solid.
“Tagged !! Starts !! Tex me !! No trades !! Welcome all cash offers !! Don’t need it !”
UPDATE: Still Available.
(01/02/2016) There’s still plenty of work left.
http://dallas.craigslist.org/dal/cto/5420964693.html
“1948 CJ-2A body — complete and fairly straight, very little rust.
New hat channels and gauges
CJ-3A windshield — no glass
Swinging pedals and brake booster from a YJ
New aluminum radiator 60’s Mustang w/elect. fan
1973 CJ-5 narrow track chassis and axles, 3.73 gearing, 2.5″ lift springs
rebuilt 11” drum brakes; new Skyjacker shocks; new brake lines
Continue reading
Here’s a neat story from the Reading Eagle out of Reading, Pennsylvania.
This may be worth a look.
“2.0 ford engine,12 volt electrical system,all lights work,brakes are good,,4×4 works,runs and drives good,original paint,turn key,clear title,”
UPDATE: **SOLD** Was $16,000.
Looks good.
“museum quality cj2a jeep new body chassis everything rebuilt or new 98 % correct”
I suspect this will go quickly.
“i have a 1943 jeep with title in good condition needs a little to run again was gunning when parked years ago has been stored inside metal building since it was parked ran all the time before that death in family is why it got parked.”
Oscar spotted this one.
“1951 Navy M38 Jeep. Serial # 36689. Mileage reads 35,201. Powered by the original 4 cylinder gas engine, original 24 volt electrical system. 3 speed manual transmission, 2 speed transfer case with over drive. Comes with radio and all items in photos. The Jeep starts easily, runs and drives good. Tires are dated 1967. Some surface rust but appears to be a very solid body. We have not powered up the radio but were told it works. All around nice driving Jeep. To watch the video, click on the Video tab next to the Photo Tab above.”
http://www.govliquidation.com/auction/view?auctionId=10590969
The drain holes have been filled.
“Military Jeep in good shape, recent tune-up. Original flathead engine and drive-train. Call for info.”
UPDATE: **Status Unknown** Was $7600.
“1946 Willys Jeep CJ-2A CJ Great Flat fender – (Saint Paul, MN)
1st civilian model
We did a frame off restoration in 1994. (including engine rebuild, tranny rebuild, etc….)
Runs and drives great. It has a warn overdrive (rare), which enables it to go 50/55 mph.
We have owned it for about 21 years. We recently tuned it it up. (Master cylinder, cap, rotor, plugs, and carb adjustment, oil change and pan re-seal, new alum radiator, water pump, and alternator (GM Style).
(pictures don’t show new radiator and alternator)
Tires are in great shape.
4 wheel drive works well, and the transfer case works properly. All electrical works as well. We hate to let it go, but have too many Jeeps. It is only used to plow our driveway – this is not its’ primary function.
Please call with any questions. I prefer you call between 4:00pm and 8 pm. The Jeep is currently in heated storage in Anoka, but can be taken out. (wed evenings work well for me) Please call instead of emailing (I am posting this for my father, he does not do Craigslist)”
UPDATE: **SOLD** Was $12,500
“1952 Willys M38a1 ‘Army Jeep’
Full frame off restoration. Everything was rebuilt or replaced with NOS or new parts. Too much to list.
Jeep is fully functioning 24 volt waterproof electrical, great running 134 Hurricane engine, excellent driving and show quality paint.
I never thought I would sell. The only item that is unfinished is the vacuum system for the wipers. Only needs a hose. I was never going to drive in the rain.
Price is starting at $12,500 which is less than I have in it or the parts would be worth separate. Text or call for a viewing.
Little list of work done:
The body was removed and any rust was cutout and welded in new metal or replaced whole pieces, such as both fount fenders and the gas tank sump. Frame was striped bare and coated with POR-15 rust inhibitor. Engine was also painted with POR engine enamel.
All wiring is new, bought from Vintage wiring of ME. It’s all waterproof with mil-style connectors. The generator and distributor are NOS 24 volt, with new coil and points. Brand new fuel tank and fuel and vacuum lines. New water pump, fuel pump, oil pump, clutch, radiator, hoses, belts and ect. All new brake components: master, caliper, shoes, drums, and lines. New or NOS lights, all functioning. All new bearings/seals in burfield hubs and Warn lock out hubs. New axle on right front. NOS vacuum wiper motors. Brand new top and seat covers. Brand new tires. Gauges are new or NOS. New windshield and gasket. I believe the decals correlate to my fathers unit in Vietnam, although he was in a helicopter and not a M38a1.”
UPDATE: **SOLD** Was $4500
(06/19/2015) Has a few updates/mods.
“Nice looking 1948 jeep willys runs good !!! Call for more info”
It is rough and doesn’t run.
“This is a 1949 Jeep Willys CJ3A for Parts or Project that is in rough shape but has many usable parts. Does not run”
Includes a warn OD.
“1963 CJ5 jeep
Has low miles and a rebuilt motor as of 8000 miles ago.
4cly
Manual trans with a Warn over drive system.
31×12.50-15 Toyo AT. Older tires. Lots of tread still.
Needs some work. Run and drives well.
Currently in the process of doing body work and will need some rust repair to make it whole again.
Fun toy to play with. ”
UPDATE: **SOLD** Was $4000.
The old lettering is great.
“4X4. All there. Turns over but does not start.
No trades or low offers. No offers entertained without first seeing the truck.”