To Top

1948 CJ-2A Cheney, Wa $450

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

There is value here.  Apart from the owl dung, the body and body parts look good.

“This jeep is a project. needs engine, wiring harness,lot of parts to complete. The tranny is still there. I have had this jeep for about 23 yrs stored in a barn as you can see from all the owl dung on it. The tub is in decent shape for the year.The tub is just sitting on the frame. Comes with manny parts. Have clean title in hand.Thanks for looking. Only CALL to contact me . 425-327-9721 Thanks, Doug $450”

http://spokane.craigslist.org/cto/2767494407.html

 
To Top

Year? M-38 Tub Cypress, TX **SOLD**

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $350.

Looks pretty rough.

“I have a willys m38 body that I am selling. Not sure if it’s 51 or 52. Sorry there are no plates with this tub. The rest of the jeep is not for sale, only the tub. There are no fenders, hood or grill included. You do get the tail gate. I can deliver for an extra price inside the Houston area. Feel free to ask questions.”

 
To Top

1950 CJ-3A Castle Rock, Co **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.  

This might be good for the price.

“1950 Willys CJ3A – running original flathead rebuilt engine. Body in great condition. Everything operational, roll-bar and bikini top. Garage kept, but wife wants the space for her car. Clean Title.”

 
To Top

1963 CJ-5 Blacksburg, VA **SOLD**

• CATEGORIES: CJ5 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $500.

For $500 looks like a good parts jeep.  It doesn’t run at the moment, but has a Kelly hardtop.

“For sale is a 1963 Jeep Willys CJ5 it has a steel hard top and full hard doors in good condition. Also it has 2 engines the orginal 4 cylinder and the buick v6 found in the later 1960’s willys, also it has the orginal transmission and transfer case, has a rear dana 44 and i also have an extra dana 44 with it and too many other parts to list. I also have a clean and clear title for this jeep.This is a restoration project, frame body and hard top has surface rust but has no rust through spots just on the rear cross member. Transmission and transfer case will need overhauled and it does not run.”

 
To Top

1952 CJ-3A Project Huron, Oh Status Unknown

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  Was priced at $995.  Status unknown.

There appears to be some value here.

“This is a willys jeep 52 flat fender parts/project without a title. It has a running 289 ford and ford 3-speed with adapter for the jeep transfer. ”

 
To Top

1942 GPW Orlando, Fl $3500

• CATEGORIES: GPW (Ford MB) • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $3500

(11/12/2011) This has the ‘Texas style” rear hunting seat.  Somebody added a tailgate though …

“1942 Willy Jeep built by Ford.
Frame Serial # GPW82547
Motor Serial # GPW105266
Glove box # GPW34971

Electrical converted to a 12volt system
Engine just rebuild
Cylinders bored .040 over
List below are the parts that have been replaced with new:
Crank
Camshaft
Chain and sprocket
Resurfaced head
Pistons and rings
Valves and springs
Oil pump
Fuel pump
Electronic distributer
Alternator
Electric fan
Carburetor
and much more…

Runs great, No smoke out the exhaust.
Has a high hunting seat that is easy removable.
Gas tank is a plastic 15 gal (removable)

321-277-6918”

http://orlando.craigslist.org/cto/2770944413.html

 
To Top

Year? CJ-2A? Gray, Me $800

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

The jeep is apart.

“Willys Jeep project forsale or trade. The jeep is currently torn down to the frame. I have 2 tubs (rough) and a spare set of axles. $800 or trade for a 4×8 trailer, 2up snowmobile, motorcycle or other interesting trades. If you respond via e-mail put Willys in the subject line or I will delete, or call 595-7269.”

http://maine.craigslist.org/bar/2772140123.html

 
To Top

1946 CJ-2A Larwill, In $1000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

There might be some value here.

“1946 cj2a motor turns body rough good frame easy restoration call or txt for details Jeff 1574 527 1102”

http://fortwayne.craigslist.org/cto/2772546418.html

 
To Top

1945 GPW Adamsville, Tn $1000

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

It runs and drives, however I can’t agree that “everything is as it should be”.

“1945 military jeep made by Ford GPW. It’s the same thing as a Willys and parts are interchangeable. The original 4 cylinder was pulled and a V6 from a 53 was installed. There is surface rust but no holes or anything bad. The jeep runs and drives great and the 4wd and everything is as it should be. Might trade but cash is preferred. $1000 731-607-1405”

http://jacksontn.craigslist.org/cto/2773100179.html

 
To Top

1951 CJ-3A Spanaway, Wa $1500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“project jeep its striped to the frame and axles ,have original 4cyl.,plus extra one both ran when removed,newer bestop 2in rancho springsand shocks[new] body in fair condtion full roll cage 253-318-2761 between 10:00am &8:00pm”

http://seattle.craigslist.org/tac/cto/2771274364.html

 
To Top

MB, M-38, CJ-5 Parts Cle Elum, Wa

• CATEGORIES: CJ-3A, CJ5, M-38, MB This site contains affiliate links for which I may be compensated.

MB Seats among other items.

“Parting jeep CJ5. Nice straight tub and sheetmetal, T14 transmission w/ super T18 transfer case and V6 bellhousing. Disassembled engine, Power take off units and PTO winches. Lots of misc small parts. Some Fhead engine parts and early CJ stuff. Nice CJ3A – M38 windshield frame with good glass. WWII MB seats. call with needs. 509-674-6054 Can deliver to Seattle area.”

http://seattle.craigslist.org/est/pts/2773041863.html

 
To Top

1951 CJ-3A Grays Harbor, Wa $2200

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“51 CJ 350/th350, dana 18 t-case, 44 rear, 27 front 4.27 gears. currently on 35’s. One ugly machine but goes where you want. This is an offroad vehicle, it is licenced but is not fun to drive on the street. Reply to CL if interested can forword pics and answer any other questions. price $2200.00, negotiable. also possible trades.”

http://seattle.craigslist.org/oly/cto/2773407646.html

 
To Top

1946 CJ-2A Portland, Or $4750 or Trade

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

I suspect this is offroad only.

“1946 willys flat fender
351w with 68 miles on it
Newer c4 tranny
Dana 300
Dana 44’s spool in the rear &welded frt
36-14.50-15 super swamper at 99%”

http://portland.craigslist.org/clk/cto/2769167753.html

 
To Top

1956 Truck Bernardo, NM **SOLD**

• CATEGORIES: Willys Trucks • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6500

(10/27/2011) It looks very nice.

“This is a 1956 Willys Jeep 1/2 ton 4 wheel drive Flatbed. The engine is the original 226 Hurricane 6 cyl. It runs well. The bed is a hydralic lift system which works very well as does the 4 wheel drive. The truck does need some electrical work (tail lights, turn signals) Considering the year of this truck, it is in near excellent condition! Please! Serious inquiries only. No emails”

 

 
To Top

1959 FC-160? Torrington, Ct $6800

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(10/13/2011) I’m assuming the model number is an error?

“Listing truck for a friend. 1959 Forward Cab truck six cylinder 230 ci hurricane engine with rack body flatbed dump . Runs great .Too many new parts to list. Perfect shape no rust. I have a couple additional pictures. Otherwise call for more details. eight 60 309 1937 trailer willys kaiser fwd car wrangler cj7 5 rollback cab over wood stove”

http://nwct.craigslist.org/cto/2773393412.html

 
To Top

Redux … Some Site Updates

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

It seems one of the updates I did to the site yesterday broke it this evening, leaving me unable to do any updates (lol).  After a little time, I was able to fix the problem so everything works again (I hope).  So, I will delay updates until Thursday morning.

 
To Top

Willys on a Stick on Route 231

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

Bob reports he spotted this last week while driving in the Florida panhandle. This was right along the Alabama-Floridastate line on route 231 north of Marianna.

 
To Top

1948 ‘Lefty’ Vesper, Wi $1500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This looks like a good price.

“1948 Willys Jeep. Flat Fender Style. New Vinyl Top. Very Original condition. Drive train is good and runs without any smoke or engine noise. Frame is good but the body has been patched. Very useable the way it is. Includes Owners manuel. 715-569-4171”

http://milwaukee.craigslist.org/cto/2768610805.html

 
To Top

Driver’s Side Fender Northern Colorado $75

• CATEGORIES: Body Parts, Parts This site contains affiliate links for which I may be compensated.

“Willys Jeep left front fender, slight rust on outer fender brace. Otherwise in fair to good condition. This will fit from 1946 to 1963 CJ2A, CJ3A, CJ3B, MB, M38.

Asking $75.00

970-631-2747 email or text only”

http://fortcollins.craigslist.org/pts/2769816046.html

 
To Top

Flatfender Body Kit Bethlehem, CT **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1100.

This is a hand made body advertised as a CJ-2A kit, but looking more like a MB/CJ-3a kit.

“What we have here is a complete body “kit” for a CJ2A or 3A. The tub was hand made by a guy in New Hampshire, THICK sheet metal, all custom welded, VERY solid, the fenders are again hand made in very thick steel, the hood, grille and windshield are all stock parts. All parts have some surface rust from sitting , but NO rot”

 
To Top

MB Parts Ecorse, Mi

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

No pics provided.

“I have a front and rear axle, hood, transfer case, hood, off of a Willys MB. I also have an engine block from an M38A1. Prices are negotiable. Call alex 313-399-1324.”

http://detroit.craigslist.org/wyn/pts/2770080973.html

 
To Top

1948 CJ-2A Placerville, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500

(11/30/2011) Much work left on this.

“For Sale, 1948 willys CJ-2A flat fender project.
rebuilt Buick 225 odd fire V-6 with HEI conversion for odd fire
SM420 4spd
Dana 18 transfer case
lift springs
2 sets of axles and wheels
custom full cage with soft top and doors
tilt steering
needs to go to someone looking for a good start to a flat fender project…”

 
To Top

Merry Christmas

• CATEGORIES: Features, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

Bill forwarded this great picture of his wagon in front of someone’s light show (his possibly?).  Thanks Bill.

I hope every enjoys their Christmas and has a Happy New Year!

 
To Top

James’ Holiday Surprise from Walcks4wd

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

James wrote me this evening about a wonderful surprise from Walcks4wd.  Congrats James!

“Merry Christmas Dave! Hope you and your family are having a good Christmas this year! I woke up this morning and Santa was very good to me. I opened presents from Mom and Dad and later was sitting in our living room listening to some Tony Bennet and Frank Sinatra Holiday music.

I opened up my email and Santa had left another present for me. I won the 2011 Walcks4wd Wishlist! They made my Christmas wishes come true! I want to thank Carl Walck and his family and wish them a Merry Christmas and a Happy New Year.

I also want to thank you Dave. Through your website, I found Walcks4wd. They have the most authentic and highest quality parts around. I would recommend them to anyone restoring or fixing up a jeep. They are truly good people. Thanks again and have a Merry Christmas and a Happy New Year! James.”

 
To Top

Wanted: 3 Wing Wagon Hood Ornament

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

Peter is looking for a specific hood ornament for his Wagon.  Contact him at Peterkramer1949@aol.com

“Hello folks and greetings from Germany. The last thing I would need to end the restauration of my ’53 Willys Wagon on a ’83 CJ 8 frame & drivetrain is a 3 wing hood ornament which was used from ’53 to 64. Used will be O.K. and the shipping adress is CA. Thanks for checking your stock and best wishes for the holidays.”

Here is an example of one: