UPDATE: **SOLD** Was $11,000.
Appears solid.
“Hi I have a 1948 Willys jeepster for sale selling because I don’t drive it much. Starts and drives well for its age.it is a 3 speed on the column.It has been restored asking 11,000 obo”
UPDATE: **SOLD** Was $11,000.
Appears solid.
“Hi I have a 1948 Willys jeepster for sale selling because I don’t drive it much. Starts and drives well for its age.it is a 3 speed on the column.It has been restored asking 11,000 obo”
Lots of original jeep here, including a “‘Jeep'” marked key. It runs, but does have body rust.
https://www.facebook.com/marketplace/item/2839073596217966
“$6000 OBO. Runs, drives, stops great. Tuxedo Mark 4, very rare. 4×4, v6, 3 speed. All original, except for brake lights, but I still have the originals. Frame is solid, no issues. Original owners manual and keys. Includes original hard top and doors. 5 new tires. All electrical except brake light switch works. Brand new gas tank. Leave as is, or restore; it’s turn key ready. Battery is less than a year old. Has original working AM radio and original factory installed, working heat”
UPDATE: Still Available.
(04/11/2021) It’s listed as a project car; it’s not clear what work it needs.
https://www.facebook.com/marketplace/item/459034335413548
“Project car 54′ jeep Willy’s Sedan convertible. $9000.oo Firm”
This is a CJ-2A with a Meyers-made Sears Top and a DJ dry gauze air cleaner.
https://www.facebook.com/marketplace/item/305161411224153
“Up for sale is this 1950’s Jeep. I don’t know a lot about this, just looking to get rid of it. Contact me for more info or to come see it.”
This appears to have a replacement body, as it’s a mix of M-38 and MB styles. Also, it shouldn’t have full-floaters (though I think there are a useful add).
https://www.facebook.com/marketplace/item/17943834073099
“1951 Willies Jeep with extras.”
Someone has fun with this build.
https://www.facebook.com/marketplace/item/576717266659294
“Purchased The Willys in 2018 from a farm. The Body was mostly Rust free. Then we purchased a 1986 Monte Carlo with a Ponitac 400 Engine and 200R4 Automatic Transmission. We proceeded to remove the Monte Carlo Body off and Move the Willys Body to the Monte Carlo Frame. The Pick Up bed has been Custom Made. Looks like a Wrecker but the Wrecker is only for looks. There are new tires and Wheels not shown in pictures. It looks and runs good. Currently registered and inspected in NH. It is currently located in the shop Orange Mass putting the finishing touches on it.”
UPDATE: Still Available.
(05/27/2021) This runs, but it appears to have a CJ-5 body melded with a CJ-3A cowl.
https://www.facebook.com/marketplace/item/1466927140316312
“Good jeep starts right up 35 firm will start it up in front of you”
UPDATE: Still Available. Now priced at $2800 (was Make Offer).
(12/23/2021) Doesn’t have an engine.
https://www.facebook.com/marketplace/item/352030066356998
“I have a 1946 Jeep willys for sale. As you can see from the pictures the front end it taken off since I pulled the motor that it came with and was going to replace it with a Buick 3.8. Jeep is in great shape for how old it is. Everything you need to get it back together is all there. Floor needs repair in one spot. I was going to do a brand new tub but decided not to. Frame is immaculate. Comes with a 3.8 turbo Buick. No rush to sell. Negotiable”
UPDATE: Price dropped to $5550.
(05/13/2021) This has an old NH registration, but no title, so sold bill-of-sale.
https://www.facebook.com/marketplace/item/494619178335953
“Willys CJ-2A serial number puts it from 1946. Have a bunch of new parts to go with it and two original fenders that are in better condition than what were on it. Was running, Plan was to reseal engine and make it a military replica, but had a new kid, so projects all took a backseat. Rather have this go to someone who use it vs it sitting here for years till I can finish restoring it. Hood and fenders and radiator are off, where I was went I ran out of time. Pulled the head to inspect valves and cylinders, look great. No idea why the listing say automatic transmission, obviously a standard, but no option to change it. As for trades looking for quality bench top lathe and or milling machine. also on the lookout for 6′ brush hog for the tractor or a good wood splitter. or if you have a offer doesn’t hurt to ask. Will be on bill of sales, has old registration from previous owner when it was played in NH.”
UPDATE: Still Available.
(03/18/2021) Has an F-head.
https://www.facebook.com/marketplace/item/1099849143868568
“1942 Willys GP43 jeep. Military jeep from WWII. Vin plate dates 9-11-42. New carb. Electronic IGN. Hurricane 4 cyl. Manual with working 4wd. Needs seats. Steering column and box rebuilt. Brakes need to be checked. Runs but hasn’t been driven in a while.”
UPDATE: Still Available.
(05/27/2021) This may have an aftermarket hood and an MB/GPW passenger fender. The drain holes look filled.
https://www.facebook.com/marketplace/item/4135425873158357
“1953 Willys Army Jeep Has complete soft top, new battery, runs great. $16,000 obo”
UPDATE: Still Available.
(05/13/2021) Could be some parts value here. It has a DJ-3A hardtop.
https://www.facebook.com/marketplace/item/918028208770932
“1953 Jeep willys. Needs a lotta work. No title but have vin plate. No motor.”
UPDATE: Still Available.
(09/21/2020) Here’s a utilitarian rig.
https://www.facebook.com/marketplace/item/1479197772283483
“50’s military Jeep converted to a plow rig and grader. Has power up and down grader blade on rear of Jeep. Plow on front , hydraulic up and down. No turn pistons on at the moment but the lines are there to install. Plowed twice with Jeep. It’s a beast. Took in trade. The guy I traded with said he noticed a clicking noise in front end. Removed cover and said one tooth missing from ring gear. I haven’t been into it to see what is going on. I plowed with it in 4×4 and it was fine. Needs 4 glow plugs installed which I have. It’s a diesel. Motor is a 4 cylinder Ford Has a roll cage. Cool rig for a camp or farm. Well built. Firm on price. Thanks for looking. Runs excellent. Has small fuel leak on very top of injector pump. O-ring on top shaft. Easy fix for someone who is mechanical. I have a plow truck. Just don’t need this. Come check it out.4 new tires. Will consider a trade for a decent quad with plow”
UPDATE: Still Available.
(02/19/2021) Listed as a 1942, I’m guessing this is a CJ-2A. It’s got a Sears/Allstate Meyers-made hardtop.
https://www.facebook.com/marketplace/item/499034301493290
“Need to be restored motor is not seized it all there bill of sale best offer”
Could be a good price.
https://www.facebook.com/marketplace/item/1617078282015496
“1948 CJ2A with a metal half cab and plow. Original drive train.”
This looks to be an early one. Floating rear hubs, square windshield bow-holder-bolts, early head, indents …
https://www.facebook.com/marketplace/item/212444164051582
“Original, Runs Good, New Tires”
Just a couple updates for Friday.
Gary informed me that Lawrence Elliot of North Carolina passed away recently. Lawrence was a long time jeep mechanic, who owned jeeps up until he passed. He also rebuilt bell cranks, installing bearings into them to improve their behavior.
Ann, Maury and I had a chance to spend time with Lawrence and check out his jeeps back in 2018. Below are Lawrence and I posing at the back of his Willys Truck.
Jim’s got his wagon for sale. He’s unsure of the year. It includes a Western Snowplow and a Ramsey PTO winch. You can contact him at 815 419 8445 or jbloughus @ gmail.com (remove spaces around the @).
“There is no title. It has been in the barn for years.”
UPDATE: Still Available.
(05/27/2021) This has a fiberglass body and a variety of other updates.
https://www.facebook.com/marketplace/item/1184167572004067
“Nice old Custom Willys Jeep with a Buick V-6 engine and Auto tranny with Hi and Low range a 4 wheel drive. It has a fiberglass tub in the rear with a new left front fender and new windsheild frame. Also has a custom roll bar as you can see. I have had the frame all restored and is in great shape. Also has custom front and rear bumper assemblies with tow hitches on the front and rear. Needs a little more work to make it an everyday driver. Have a Mass. Title for it.”
According to Bob Western, it looks like Pennsylvania will allow this year’s Great Willys Picnic to be hosted on Sunday, June 13th.
This in-depth article on the use of jeeps and planes includes a variety of photos. It appeared in the April 08, 1951, issue of the Nevada State Journal.
UPDATE: **SOLD** Was $6000.
Only the one pic. Has a Koenig hardtop. Looks promising.
“Just call with any questions, or leave us number and I’ll get back with u. It’s good shape and runs”
UPDATE: Still Available.
(04/02/2021) This is a custom build atop a CJ-5 Chassis with reversed front springs and a variety of other mods.
https://www.facebook.com/marketplace/item/710333092972269
“Willys Jeep CJ3B High Hood This is a reproduction body sitting on a 71 Cj5 frame with many modifications to make it an excellent driver and wheeler. You can cruise 65 down the freeway with one hand on the wheel or take it to the trails and turn some heads. If you know the original CJ-3B you can’t do that stuff in stock form Dauntless 231 odd fire v6 engine T18 trans Dana 18 transfercase Disc brake Dana 30 up front Offset Dana 44 in the rear Very nice power steering conversion Front shackle reversal Custom built roll cage and front and rear bumpers Sitting on 32’s but can easily clear 35’s Asking 12,500 or best offer”
UPDATE: Still Available.
(03/18/2021) This appears to have a Bobcat fiberglass body on it.
UPDATE: Price dropped to $6500.
(09/28/2020) Listed as a 1942, this may be a CJ-3A.
https://www.facebook.com/marketplace/item/504496037423598
“Very good condition with original engine. Has electric fuel pump and fuel reduction unit. New brakes. Needs new soft top (I have the old one). Has a tow bar.”