The author of this review evaluated his time driving in a 2WD wagon.
Took Racer for a Pasture Spin
Looking out over the pasture, I see lots of green, but don’t see all that much cow shit. So, I didn’t think I’d hit all that many piles racing around it. Welp, those tires found plenty of piles and threw it all over me and the jeep.
This was the first time I ran it in 4WD. That worked flawlessly. As for control and driving, I found the racer felt really balanced and smooth, despite the bumps (the pasture isn’t all that even). The steering is a little stiff, but that feels great when going faster.
It seemed like it was missing a bit as I hit higher RPMs; I couldn’t decide if that was caused by the bumps disrupting the gas flow in the carb or by a timing issue. We’ll figure it out.
At the end of the video I realized that the fan wasn’t working (it turned out to be a loose connection), so I was trying to get Ann to open the gate, but she decided she would film me while pretending to not hear me, lol … she is a merry prankster!
1947 CJ-2A Eatonville, WA $7000
UPDATE: Price dropped to $7000.
(05/30/2023) Lots of updates and a Bobcat hood on this flattie.
https://www.facebook.com/marketplace/item/529981069175659
“1947 Jeep CJ2A Flat Fender chevy 4.3 v6 w/ all new holley sniper fuel injection, new billet holley distributor, holley coil and holley ignition box less then 1k miles on new parts, sm420 4 speed transmission, dana 300 tcase twin stick. Dana 44s front and rear, locker rear open front, disc brakes all around, brand new soft top and framing. Brand new beadlocks and 35×12.5×15 bfg km2 mud terrain tires. Rare hard to find JEWEL grill, windshield and tailgate all stainless. Aluminum radiator/electric fan. Flowmaster exhaust/headers. Aluminum fuel cell in back of tub.”
Mini Jeep MB Steel Body Kit Lake Stevens, WA $999
Someone was looking for one of these.
https://www.facebook.com/marketplace/item/7288992821113999
“Brand new, stored in our heated garage. Fits: ATV, UTV, Go Kart & Riding Mower Chassis Built to look like a full sized Jeep Steel Construction Includes: Body Tub, 2 Fenders, Hood, Windshield Frame & Tailgate 59”long by 32” wide”
Sand Drag Jeep Body Gales Creek, OR $400
Not easy to find these, but not much demand either. Seems a good price.
https://www.facebook.com/marketplace/item/839706230931737
“Center seat sand drag body and Jeep bare frame , older lightened Jeep frame ladder bar and spring mounts . Nothing but body and frame . 400 or maybe trade for small dirt bike”
1959 CJ-3B Auburn, WA $4500
UPDATE: Price dropped to $4500.
(09/11/2023) This is titled as a “1959 4cj5jp”, but it may likely be a 1959 CJ-3B (it has the later body with the passenger vent).
https://www.facebook.com/marketplace/item/842601570476996
“Not sure of year titled as a 1959 4cj5jp. Lots done to it. Got it in a trade. Chevy 350 motor resealed,t19 transmission Dana 44 3/4 ton axles narrowed,new radiator&fuel tank 34 10.5 16.5 super stampers needs a few brake hard lines needs motor wiring for ignition&alternator and master cylinder for clutch…. awesome rig will be a looker when done… if it’s posted its available.no low ballers please!! Possible trades no junk if you got a trade send me pics with comment”
Sand Drag Jeep Scio, OR $6000
It appears to have a Bobcat fiberglass body.
https://www.facebook.com/marketplace/item/1280946016116829
“Sbc 350 with turbo 400 ready to race I built it to run at the Sand drags but I ended up getting a new side by side instead I don’t know much about the motor or trans but I do know it was impressive anyway Im mainly looking for cash to pay off some unexpected bills so I guess I’m not keeping it as a back up toy”
1942 Hood River, OR $5000
It doesn’t run.
https://www.facebook.com/marketplace/item/1449550218950090/
“I have a 1942 Ford JP. Clean title in hand. Not Original Engine. These were made by Ford during WWll and were used in war frequently. This Jeep doesn’t run but it ran when it was parked years ago. Haven’t really tried to start it because there isn’t a battery. It is a 3 speed manual. It has a dual case, and front locking hubs. This Jeep is very very rare, yes it doesn’t run but everything else is there. Body is straight, tires hold air, engine and tranny are there ect…. I won’t respond to “is this still available” not in a hurry to sell, looking for the right deal as this Jeep is very rare and is 81 years old. Number of miles is unknown You will need to bring a trailer”
1958 Model? Brighton, CO No Price
No pics and no description. The sale is part of a sale of other vehicles posted to Barnfinds. Maybe something or maybe nothing. Model unclear. Thanks to Bill for sharing it.
https://dallas.craigslist.org/ftw/cto/d/brighton-mopar-project-cars-camaro-z28/7669484381.html
1952 Sand Jeep Carlton, OR $4000
Lacks an engine, but still may be worth a look.
https://www.facebook.com/marketplace/item/1253607305338356
“1952 Willy’s flat fender sand jeep selling it as a Roller, which means No Motor so don’t ask if it runs. Has a built power glide trans shifts firm with no hesitation. All gauges work, all the switches on the switch panel work. Will come with the electric water pump and fender well headers for your motor. Is set up for a Small Block Chevy. If you have any more questions please message me if your interested. Do not have a title will provide bill of sale”
1954 Wagon on Bronco Chassis Arlington, WA $7500
Unclear how far along this Sedan Delivery project is.
https://www.facebook.com/marketplace/item/643526694427791
“1954 Jeep Willys delivery sedan with a 302 V-8 motor and sits on a Ford Bronco frame. There are pieces that go with it, gas tank, bumpers, wiring, dash instruments, etc. But no fenders or seats. As is!”
1960 FC-170 Conroe, TX $3500
No title, but does have serial number plate.
https://www.facebook.com/marketplace/item/1013003403158769
“Rare Jeep FC170 cabover. Super solid truck that I pulled from a collection in South Dakota. No title unfortunately. Some rust in driver foot well and cab corners. Engine turns over by hand. Good windshield. Located in Conroe Texas 77303. I may entertain trades for other classic cars or trucks. Asking $3500 obo.”
5 9×16 Rims Beavercreek, OR $250
Maybe someone can use these?
https://www.facebook.com/marketplace/item/884726433078458
“Up for sale is a complete set (4 plus your spare) of vintage steel tire rims. Size is approximately 9×16. Standard flat fender jeep brake drums are 9 inch drums with a bolt pattern of 5 X 5.5”. These rims will fit any jeep made from 1941-1960’s. These came off a 1948 CJ2A I restored a few years back. I went back to factory size on that jeep so I had these left over… All 5 rims are in solid condition and will hold air no problems. They have typically type surface rust you would expect to find on a vintage steel rim but they are straight and again, will take new tires with no issues. I sprayed on a coat of black paint a few years ago just for added protection. I’m guessing new owner will blast them down metal and start fresh so I haven’t put any time into them other than a good pressure washing. Rims have been stored inside my shop so they have been out of the weather since I’ve had them. Price is $250.00 bucks firm ($50 each) and not looking to trade. Cash is king. Make note I’m happy to meet up in Oregon city by the high school so you don’t have to make the long drive out to my shop. PM me for any questions or if you want to set up a time to meet. Good solid set of rims that are ready for mounting on your vintage rig. If you are looking for original size rims for your flat fender jeep, let me know as I have dozens available…”
1946 CJ-2A Puyallup, WA $1000
This is a rough one.
https://www.facebook.com/marketplace/item/126517060548267/
“Has motor doesn’t run great project”
1972? Mud Racer Clatskanie, OR **SOLD**
UPDATE: **SOLD** Was $3000.
(06/17/2023) I have no idea what these mud racer chassis are worth.
https://www.facebook.com/marketplace/item/735874405207592
“One of the top mud racing chassis around. 8 3/4 Chrysler rear end with a strange spool. With 4.56 gears and 35 spline axles. With special chain drive transfer case and Dana 44 frt diff.Set up for Chevorlet. Serious inquiries only please. Cash only”
1944 MB Prineville, OR $4500
Seems worth a look. Thanks to TJ for sharing it.
https://www.facebook.com/marketplace/item/305379225458172
“Jeep that runs and drives. Have a rebuilt second motor that will need finished to go with it. Flat head 4 with T90 transmission. Tough but would make an amazing vintage vehicle. Got it running and that was my goal”
1962 Willys Interlagos Convertible Costa Mesa, CA BaT
UPDATE: Blaine confirms this was Dan’s car previously. It did not reach the reserve, with bids maxing out at $43,000.
Blaine spotted this 1962 Willys convertible Interlagos, which sits as $23,000 with 3 hours left in the Bring-A-Trailer auction.
You can see pics of this car from the post of our visit with Dan back in 2014: http://www.ewillys.com/2014/04/13/day-24-apr-12th-dans-fcs-and-the-scared-romanian/ . He was pretty sure it was the only convertible Interlagos in the US.
https://bringatrailer.com/listing/1962-willys-overland-interlagos-4/
1958? Economy Delivery Brochure and Press Photos
Over the past couple of days I’ve turn my attention to the disaster that is the ‘jeep’ office. My library of non jeep books and jeep books and jeep toys and other jeep stuff has remained mostly stored for the past two years in this tiny office that’s part of the shop. This is one room that has undergone almost no remodeling … and it shows.
I’ve made some progress (just putting up the books and binders in bookcases has made a difference. One of the side benefits of doing this is finding stuff that I have yet to post, such as the pics and Boyertown Economy Delivery brochure below …
One of the jeep photos appears to have a plate dated 1958, so that’s how I am dating this package.
Photo of Norman’s Garage With Jeeps
This photo of Norman’s Amoco gas station and garage in Akron, Ohio, includes three CJ-2As with modified bumpers. However, note the “Norman’s” sign. I think that is a neon sign and I’m wondering if that jeep lit up at night. If so, that would a pretty awesome sign!
Here’s a closeup of the sign:
Here’s a closeup of the middle jeep:
1954 KW Truck Brochure SD-203-4
UPDATE: I’ve updated this post with a higher quality scan of this brochure.
This is the early 1954 version of truck brochure with the KW stamp, form SD-203-4. It’s the only example I’ve been able to find. The subsequent version, form W-203-5, with a green theme is more commonly found online.
1956 Station Wagon Sales Kit
Matt was kind enough to share this rare Station Wagon Sales Kit he procured. You can see all the pics here: https://www.facebook.com/groups/2382510764/permalink/10159709375710765
1960 Slide of Surrey/Gala in Hawaii **SOLD**
This slide just sold on eBay for $9.25 (+$4 shipping). It’s a great pic of s Surrey parked in front of the ocean. Someone more familiar with Oahu may recognize that location.
1961 M-676 Las Vegas, NV **SOLD**
UPDATE: **SOLD** Was $9000.
Wow, this M-676 appears to have the original Navy lettering on the doors! Engine is siezed.
“This old Jeep was a Navy truck. Has a 3 cylinder supercharged diesel engine. The engine is seized it has been sitting awhile. Has been equipped with an over drive on the transfer case. Was bought for parts but it’s too nice to take apart. Does not have a title. These are hard to find. Make an offer.”
1955 CJ-5 Fortville, IN $15,500
Mark shared this ad. Over all, this looks solid. It likely have a replacement body, as it lacks the faux battery box lid. It does have reverse front springs, so the frame may be original. This also has the King Seely 0-10 early speedometer, which only came with CJ-5s. This does lack the PTO bar in the rear. I think to secure the windshield it is using the Advance Adapter latch kit.
https://www.facebook.com/marketplace/item/305465998742470/
“Full nut bolt restoration”
`1960 CJ-5 Rocky Hill, CT $650
Bill shared this one. It runs, so there should be value here.
https://hartford.craigslist.org/cto/d/rocky-hill-1960-jeep-cj5/7669987555.html
“NEEDS PAINT AND TLC. RUNS
BEST OFFER
I HAVE THE TITLE WITH VIN NUMBER”