Fiberglass Research Archives

To Top

1949 CJ-3A Knoxville, TN **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000

(11/17/2012) Walter spotted this one. For $5000, this is worth a look.

“This is a really rare “big boy toy”. Professionally upgraded with a Chevrolet 350 V-8 engine and Turbo 350 automatic transmission. It also has Dana 60 running gears (front and back), and a fiberglass tilt front end. You’ll never see another one just like it. There are still some things that could be done to really make this a show winner… Unfortunetly though, I’m having to sacrifice for a more practical daily driver. I’ll trade for something nice, or sale for $4,000 obo.”

 
To Top

1946 CJ-2A Bobcat Body Cottonwood, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Was $3500. **SOLD**

This has both the Bobcat body and hood.  It appears to have a pretty nice paint job, too.  I”m not sure what’s wrong to make this a project vehicle.

“1946 Willy’s Military Jeep.
Straight 6 cyl.
12” Ford Drums
Bobcat Fiberglass Body
Warn Hubs
“project vehicle”
$3500 OBO. Price Negotiable. Open to trades.”

 
To Top

Fiberglass Flattie (M-38) McDonough, NY **SOLD**

• CATEGORIES: M-38 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $700

(12/10/2011) There appears to be some value here.  No motor.

“m38 willys jeep body frame only and top no motor body is fiberglass frame has been restored and painted full roll cage”

 
To Top

An Unusual Build Valdosta, Ca $1500

• CATEGORIES: Racing • TAGS: This site contains affiliate links for which I may be compensated.

Looks a bit odd to me.

“Into all types of guns. Rolling chassis with 4 link front and rear. 3/4 ton rear with 373 gears and full spool. Old fiberglass Willys jeep centered seat body with pro scoop. Body lifts like a funny car for easy access to everything. Full roll cage. Supper cool and gets lots of attention. Mud or sand dragster. Won’t take long to put this one together to race. Asking $1,500 OBO 229-834-544one ”

http://valdosta.craigslist.org/pts/2746891966.html

 
To Top

1954 CJ-3B Oceanside, Ca $3500

• CATEGORIES: CJ-3B • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Still Available

(04/26/2011)  This has a CJ-3B hood with a bobcat design on top.  I don’t remember ever seeing one.  This doesn’t have Willys on the side, so I’m assuming the entire hood is fiberglass.

“V8 ENGINE
3 SPEED TRANSMISSION
NEW WIRING
NEW RADIATOR
WENCH ON FRONT
GOOD TIRES
PLEASE CALL FOR MORE INFORMATION, 619-980-2474”

http://sandiego.craigslist.org/nsd/cto/2725786370.html

 
To Top

Bobcat Fiberglass CJ-3B Body Eatonville, WA **SOLD**

• CATEGORIES: Body Parts, CJ-3B, Features • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2200.

This strikes me as a Bobcat body?  Whichever it is, it is rare.

“Willys Jeep high hood fiberglass body, hood & grill. Never used $2200.00 Call Tom 253-307-0374”

 
To Top

1948 CJ-2A Fiberglass Project Denver, Co $2500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This is a project.

“Complete rolling chassy with fiberglass fenders and tub.
Brand new complete bumber to bumber wiring harness.
Original flat head 4 cylinder, transmission and transfer case, front and read diff’s – all original

All original – needs a few more parts plus finishing.

HAVE TITLE!

Interested – call 303-919-7923”

http://denver.craigslist.org/cto/2699212235.html

 
To Top

Fiberglass flattie body/hoods/grilles/fenders Puyallup, Wa $500

• CATEGORIES: Body Parts • TAGS: , This site contains affiliate links for which I may be compensated.

oooh … the fiberglass hood shown is the same one I had on my first jeep. There have been only a few made.

“i got a fiberglass jeep tub, fenders, 2 hoods, 2 grills, a wind shield frame with cracked glass, and a cage. i stll have a rolling chassis but in rough shape and going to take to scrap if not interested.

please contact Brenden at 253-230-6846 call or text voice mail not set up, will respond asap to text

price is $500 or what i can get out of it”

http://seattle.craigslist.org/see/pts/2692902350.html

 
To Top

1947 CJ-2A Byron, Ga $3500

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This might have a fiberglass body.

“This 1947 Willys Jeep has provided many years of hunting pleasure, runs good…$3,500.00”

http://macon.craigslist.org/cto/2690400267.html

 
To Top

Modified Flatfender San Juan Capistrano, CA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was No Price.

This has plates, but it doesn’t have front running lights, so I’m not sure it is really street legal?

“1948 CJ2A Willy’s Jeep for sale

Clear Title paid tags through 2012
Custom Mandrel Bent Chrome-Moly tubing roll cage welded to the frame
350 Chevy Crate motor with aluminum heads
Custom Radiator by Continental Radiator
TH400 transmission with cooler
Holley Carburetor
Currie custom Ford 9″ platform rear end with disc breaks
3 link coil over suspension in the rear
4 link coil over suspension in the front
Custom driveline from Drivelines Unlimited
Beard Seats
CNC Brake Master Cylinders
Fiberglass body
Flowmaster Mufflers
Auto Meter Gages
Custom bezels for gages
Optima Yellow Top Battery
Battery Shutoff switch
Earl’s fittings
5 point Simpson safety harnesses
Custom Rack for Ice Chest
Storage box
15 Gallon Fuel Cell Foam Filled
BF Goodrich Off-road tires with Aluminum wheels
Sandtires Unlimited Rear 2000 Padla Track on Steel Wheels Front 1450 Desert Track on Steel Wheels

Everything runs and works on the jeep like the day it was delivered. One Owner. One Driver. This jeep has been stored in a garage.”

 

 
To Top

1947 CJ-2A Larkspur, Co **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:**SOLD** Was $6000

(12/26/2008) From the parts list and description, there’s been a great deal of work and money invested in this jeep.  This nice looking CJ-2A sports a fiberglass body, tub and fenders.  My only concern about this jeep is the way the rollcage appears to connect to the back wheel wells rather than connecting directly to the frame, as should be done with a fiberglass body.

“Built 377Ci Chevy Small Block w/Edelbrock manifold and Carb Mallory unilite distributor, coil and fuel pump, Doug Thorley Headers, SM465 Chevy 4 speed tranny with centerforce clutch & t18 dual stick tcase with the Warn Overdrive, Narrow track Dana 44 front and rear with the full float axle conversion all around for flat towing it, One Piece shafts in the rear, Disc brakes in the front, Chevy Power Steering ….”

 
To Top

1966 CJ-5 New Hampshire, $3500

• CATEGORIES: CJ5 • TAGS: , This site contains affiliate links for which I may be compensated.

This has a fiberglass body.

“Good Running cj5 with fiberglass tub, hood and fenders. New brakes etc. 6 ft meyers power angle plow. Frame in great shape, great tires. Top in great shape as well. Will listen to trades but I have 4 other vehicles, two tractors and a bike already. Please reply with phone number.”

http://nh.craigslist.org/cto/2639082366.html

 
To Top

1952 CJ-3A Taft, CA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $900.

It’s a project. The body looks good. The body may be fiberglass.

“Selling a project.
Complete body, Good Glass Great aftermarket roll bar.
Both axles, Wheels, And Tires. leaf springs shackles…
Frame / Grill / lights / tank…
Tilt steering column
miscellaneous Parts…
No eng/Trans.
Jeep hasnt been registered for 10 years so no dmv penalties.
Call or text 661343 sixsixthreeeight …OBO… Text for better pics…”

 
To Top

1946 CJ-2A with Parkette Body Hayesville, Ga **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

Still Available. UPDATE: **SOLD** Was $1200.

UPDATE 2: I received some images from the seller.  This looks like an exact duplicate of the western parkettes.  Call the seller if you want a rare fiberglass body.

UPDATE:  I’ve exchange some information with the seller.  Apparently, there were two Parker brothers.  One ran a garage that was known as Parker Jeep (he has passed away).  Apparently, the Parker that moved West, moved back to Georgia where the brothers created some additional bodies (he now lives in Gainesville).  As best as the seller knows, he has the only jeep that was actually assembled, though not complete, with an Eastern body.

“this a 1946 willys jeep frame drveline suspension etc the tub is hand laid fiberglass built by two local brothers as i was told by one of the original people that assembled them they were built onthe west coast for racing in the sand body is in excelante shape extra set of axles have a good trans transfer case drive shafts motor needs to be built this is the only one that i know still exists wasnt many to start with looking to trade for rat rod project s-10 what ever ramptruck needing work just about anything never know 1-828-557-3343 no stupid calls dont need any help just thought i would see what is out their have my phone on all day pretty late in the evening”

http://atlanta.craigslist.org/atl/cto/2612751412.html

 
To Top

1948 CJ-2A Iuka, Il (+parts jeep) **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

This fiberglass body has an unusually short dash. I can’t tell if it came that way or if it was cut.

“Willy’s CJ2A 1948. Fiberglass tub, all tires 99%, newer wheels, Baja lights, new starter switch and master cylinder, tow bar. The brakes need bleed, battery works but needs replaced, and engine is hard mounted. It also has a transmission leak from somewhere. Engine starts easily. Four wheel drive works. The title says 1949 but the VIN is from the 1948 period so I’m not sure what happened there. No VIN tag. Head 648830 engine P31351. from what I can tell its a F-head engine M-38. Block 646228-L-W10ANI-CR-N2.

Willy’s CJ2A 1946 parts jeep. Dualmatic hubs, hood is restorable, gas tank appears to be good, transmission appears to be ok, wheels are restorable, vin tag in place. VIN 79023, tailgate 6988. The engine was already removed whe I got it. I pulled it apart and it appears to be rebuildable. Head 640161 engine J206101. No title for this jeep. Block 641087-L-W7ANI-CR-N2 4-22.

I have described these to the best of my ability. It has been a while since I wrote all these numbers etc down so I hope I got them all correct. If you have questions please ask. I bought these to restore but due to back problems I had to stop.

I have more pictures if interested. All pictures were taken today. I plan to loosely assemble the spare motor with all misc parts bagged and tagged. All is sold as is and final.”

View all the pics on eBay

 
To Top

Parkette Body and Bobcat Hood (& more) Yakima, Wa **SOLD**

• CATEGORIES: Body Parts, Features, Racing, Roll Cage • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Last price was $1000. It sold.

The Parkette fiberglass body is an extreme rare, well made body.  One of the best things about this body is that a CJ-3A windshield will properly fit it, unlike the fiberglass Bobcat body.   During the 1970s, a friend of mine bought a Bobcat body, prepped it, and painted it.  When he stuck on the windshield he discovered the cowl was too flat to properly seat the windshield to the cowl.  To say he was angry was an understatement, because he felt he was mislead by the promises the manufacturer made.

So, after talking with the Parkette body manufacturer and getting assurances that the measurements were more accurate, he bought the body and has been happy about it ever since.

The body shownn below has had it’s rear wheel wells cut a bit.  It’s got a good looking rollcage that has been attached to the frame.  If this has been available when I was building biscuit, I would have started right here.

 
To Top

1949 CJ-2A Parkette Body Buckley, Wa $1599

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $1599

(07/24/2011) This might be worth a look. It runs, too.  It appears a bit hacked up.  I’m very curious about the headlight bezels.  Those look unusual.  It has a bobcat hood.

“CJ5 frame
Parkeet fiberglass body
Buick 225 odd fire V6
Dana 44’s locked
racing seats
runs good
needs TLC
253-224-9450 no texting please”

http://seattle.craigslist.org/tac/cto/2538085459.html

 
To Top

1948 CJ-2A Kenosha County, Wi **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  SOLD.  Was listed at $750.

This is has a fiberglass body.

“A 1951 Willys Jeep for sale.
Barn fresh.
Fiberglass body, metal hood and windshield frame. Aluminum cab included (not pictured, pics available)
Sears front hubs.
$750 or best offer.
More pics available on request.
Thanks for looking.”

 
To Top

1942 MB Auburn, WA **SOLD**

• CATEGORIES: MB • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE **SOLD** Was $4000

(03/14/2010) Here’s a highly modded flattie.

“i have 1942 willys jeep that i have owned for 14 yrs it has a fresh rebuilt chev 350 4 bolt main that only has about 5 miles on it. it has a ford t-18 trans jeep dana 20 transfer case and dana 30 front and dana 44 rear with brand new 4 wheel disk brakes . the frame was replaced with a m38 frame and was boxed in for strength witch increased wheel base by 6 inches and leaf springs where upgraded to wrangler springs. the tub was replaced with a old school bobcat racing fiberglass tub it has tilt steering and was set up for a bigger guy since i am 6foot 2 inch and 320lbs it has 8000lbs warn on front and its setup for reciver mount winch on the rear and a swing away rack on the rear that holds shovel and ax and 2 jerry cans and hi lift mount .it has a set of 5 33 12 50 15 wild cat ext that are about 90% tread left and i built on board air compressor that works sweet . and i do have 14 years of receipts too i am asking $4000 o.b.o or willing to do partial trade for motorcycle + cash thanks for looking”

 
To Top

1963 Flattie Covington, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6500

“This is a fun, mechanically solid trail jeep. It has been on almost every trail in Washington and every sand dune in Oregon, so it has some issues. I have alway driving this Jeep hard but not to the breaking point. After every trip this Jeep got a good cleaning, fluids checked then got it ready for the next trip before putting it away. It drives pretty good on the street, but with the rear spool and no turnsignals and no full top, it is not a daily driver.
Continue reading

 
To Top

1946 CJ-2A Broomfield, CO **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5990

(09/22/09) It looks nice. I’d like to see more pics.  It sounds like this has had a complete overhaul over the years.

“1946 Willys CJ-2A $9,000 or best offer.  Miles: 23k on odometer. 1946 3-speed transmission and transfer case rebuilt in 2007. New fiberglass body and canvass top installed in 1995.  1974 Buick Jeepster V6 engine rebuilt in 1981. 1946 Frame rebuilt and installed in 1981. Exhaust redone in 2009. Electrical redone in 2008.  Includes tow bar and towing lights.  Operating 2-hi, 4-hi and 4-low gears. Max speed 60-65 mph. Overdrive kit, power steering, bucket seats, backseat with storage locker, 2-speed heater, spare tire, individual wiper motors. Family-owned since 1978.”

 
To Top

1951 CJ-3A Project Billings, MT **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

This is a project.

“So Heres the deal I have this willys jeep project I started years ago. The tub is fiberglass, stretched 15inches by a fiberglass shop. I have a roll cage that was built by a offroad shop in utah. the whole thing is mounted on a chevy fram with skid plates for the engne tranny and fuel tank. There is a cage in the engine bay tied into the main cage. Was set up with a SBC 350…. I will sell the body for 1700 OBO I have over 3500 in it already, on top of the glass work and extension I had diamond plate kickguards with step reinforcements built as well as aluminum Tread plate on the inside and a tread plate top rail. Would take 2500 OBO for the chassis body and cage. The rear bumper has a built in reciever and swinging tire carrier the front bumper has build in winch mount.”

 
To Top

Fiberglass Flatfender Body Boscobel, Wi **SOLD**

• CATEGORIES: Body Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Was $1500. **SOLD**

(10/05/2010) I’m not sure if this includes the front clip or not.

“1947 Willys fiberglass body for sale never been used: Make a mud bogger or use for restoration of Willys Jeep”

 
To Top

1952 Sand Drag Flattie Rancho Cucamonga, Ca No Price

• CATEGORIES: Racing • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.  Was listed at $15,000.

(12/08/2010) Looks fun.

“1952 Flat fender jeep, full fiberglass body, Chevy 406cu small block 450 hp, Dana 60 in rear w/locker, Dana 44 in front w/warn hubs, 4-link in rear, fuel cell, 205 transfer case, B&M Trubo 400 w/clutch, B&M cable shifter, disk braks w/hill assist, scatter shields, MSD ignition w/two step rpm limiter, sand tires and garage tires. This is licensed as a 1952 and is current (clean title) ready to dune or do the hill. Call Chris @ 909-944-7173.”

http://inlandempire.craigslist.org/cto/2465414203.html

 
To Top

1952 CJ-3A Lexington, SC **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD*** Was $4500.

(11/29/09) This is similar to the  old AJ Fiberglass Bodies, except that the fenders look newer.

“This is a restored with fiberglass body, 1952 Willys Jeep. Three speed 4-cylinder with military style tires. Had for 1-1/2 years and almost finished with another jeep project so this on needs a new home. I have replaced the speedometer, several hoses and gaskets in engine. Brake lights need fixing and a little more TLC. Has a bikini top (not shown in pictures)”

1952_cj3a_fiberglass_lexington5_5

1952_cj3a_fiberglass_lexington6_6

1952_cj3a_fiberglass_lexington2_2

1952_cj3a_fiberglass_lexington1_1

1952_cj3a_fiberglass_lexington3_3

1952_cj3a_fiberglass_lexington4_4