Looks solid.
https://www.facebook.com/marketplace/item/559341795170132
“1953 Willys CJ3A, runs great, fun little ride for around town. $9,500 OBO”
Looks solid.
https://www.facebook.com/marketplace/item/559341795170132
“1953 Willys CJ3A, runs great, fun little ride for around town. $9,500 OBO”
Could be worth a look. Appears solid.
https://www.facebook.com/marketplace/item/983054182256557
“53 willys cj3a runs and drives I like driving it, wheeling it and showing it off but I want to build other projects so something has to go. New valves, solid copper head gasket, GM alternator, new belt/fan/water pump. Springs/shocks/tank/seats and top all new. Weber carb, dry air filter, custom bumpers, bigger tires. Painted by previous owner shows age dents and some holes but looks cool”
This has rear PTO plus a unique wood panel and tailgate.
https://www.facebook.com/marketplace/item/532129048081813
“Needs a new home hasn’t ran for years, has a power take off on the rear, extra trans and transfer case, miscellaneous parts. Frame and body solid. Come take a look and make me a reasonable offer or possibly swap for what ever”
This could be worth a look.
https://www.facebook.com/marketplace/item/589510079141762
“The blue one is a 1952 Willys cj2a comes with vin tag and a bill of sale No title! Pretty soiled jeep body not all rotted out frame in good shape as well Chassis and drive line is from a 1947 cj2a Goes with the blue one as a parts jeep asking $3700 or best offer”
This unusual body deserves some more pics.
https://www.facebook.com/marketplace/item/1137248250119632
“1951 Jeep Willy’s Willy’s · Small_car · Driven 500 miles All wood body Willy’s.”
It runs and drives.
https://www.facebook.com/marketplace/item/542714883740320
“RADE FOR OLDER RANGER DUAL CONSOLE BASS BOAT This is a great running, driving, stopping, 1952 Willys CJ-3A. I do have the title and intact VIN plate that match the Jeep. I have put quite a bit of time and new parts in the Jeep. New Rancho lift with shocks. New 31×10.50 tires. Pretty firm on the price. If it doesn’t sell it’s getting 4cyl diesel. Figured I’d post before I pulled the original Willys F head.”
Looks like this has some version of a Porter & Reed hardtop.
https://www.facebook.com/marketplace/item/516676739586642
“This is a Willy’s Jeep. It does run. Price is OBO.”
Could be a good price.
https://www.facebook.com/marketplace/item/939096783349577
“51 willys Jeep runs and drives and registration is current. It has 289 v8 out of a 67 mustang in it . It’s fast and loud , 4×4 works great”
Not sure how much value is here.
https://www.facebook.com/marketplace/item/930533077862151
“1951 Jeep Willy body/frame. No motor. Original glass. For the serious minded project person. Easy to roll onto a flatbed or trailer to haul away! Mileage not known. Listing for my brother.”
UPDATE: Price dropped to $7500.
(05/24/2021) This appears to have a replacement body.
https://www.facebook.com/marketplace/item/3990110084392186
“1951 Willis. Has a 93 S-10 engine. Runs and drives as should.”
UPDATE: Still Available.
(08/28/2021) It’s a project.
https://losangeles.craigslist.org/lgb/cto/d/long-beach-1950-willys-cj3a-project/7392542964.html
“Rolling project. Most of the hard stuff is done.
Rust free tub, nice and straight. Some small damage on the passenger side (see photo). The frame is not boxed.
Strong 289. Cammed and stroked to 305. Holley TA-II carb. Dual Flowmasters.
Original 3-speed Transmission and D18 Xfer case.
I have a NP435 and Novak adapter kit to mate with a D20 transfer case. Rebuild kits for both, new 6 spline main shaft for the transmission, and new input gear for the transfer case. Everything is there to build it out and hook it up to the D44’s. The transmission was rebuilt for a 2wd, so it will need to be redone to mate with the transfer case.
Frame horns extended and shackles reversed. Saginaw steering already swapped in.
EZ Wire 12 fuse mini kit. (I don’t think they offer this kit anymore). The wiring is not finished, but the engine wiring is roughed in and it will run. New alternator and relay, fusible link etc…
Continue reading
Looks promising, but more pics would be helpful.
https://www.facebook.com/marketplace/item/513417749779676
“Restored and in very good condition 1600 miles on new engine and since restoration”
The dash on this is unusual.
https://www.facebook.com/marketplace/item/4316562998412821/
“Selling a Willy’s Jeep tub, windshield frame, hood and both front fenders. Will sell altogether or pieces. Would make a cool rat rod, parts for a restoration or yard art. Not sure what year it is. Being sold as parts with no title”
There may be value here. This appears to have a Sears Deluxe hardtop.
https://albuquerque.craigslist.org/pts/d/isleta-1950-willys-jeep-cj-3a/7389997943.html
“1950 CJ-3A project. Comes with 2 engines, one is a parts motor. Has a transmission and transfer case. Hard top has both doors and rear hatch. Will need to bring a trailer for pick up. No title, Bill of sale only. Asking $1100”
UPDATE: **SOLD** Was $8890.
This is a mix of parts.
“Started life as a 53 WILLYS CJ3B JEEP but now has a ‘52 CJ3A body
Hurricane F-head engine 134 cu.in. (2.2 liter), 4 cylinders Starts up fast.
Aftermarket carburetor
Upgraded to 12 volt.
130 Amp Alternator
Front axle: Dana/Spicer 25 4.27:1
New front axle bearings
Rear axle: Dana/Spicer 25, 4.27
SUZUKI SAMURAI front and rear DISC BRAKES
Brand New 8.5 in. Auburn Clutch
Spicer 18 Transfer case
Warner T-90 3-speed Transmission
9000lb winch
New muffler
Runs great. Drives great. Stops in a straight line.”
Could be worth a look.
https://dallas.craigslist.org/ndf/cto/d/granbury-1950-willys-cj3a/7389622321.html
“1950 Willys CJ3A Jeep. Runs well and in good, original condition, no modifications. Includes rifle rack, tow bar and new tires. Instruments, lights and brakes function. Go anywhere, do anything. Jeep is located in Granbury, Texas”
Needs work.
https://kansascity.craigslist.org/cto/d/ottawa-willys-jeep-cj3/7381869906.html
“This is a 1952 Willys CJ3 Jeep. I bought the Jeep about 50 years ago and was going to make it look like brand new. Than never happen. It had a over head value engine at the time so I remove it to replace it with a correct motor The flat head motor was stuck and I never got around to fix it. The rust is not bad for this age of Jeep. I think that the wheels our off a Jeep pick-up but not sure. This is a Jeep that will need a lot of attention. I am not sure if I can find the title but will be looking.”
Needs work.
https://eastoregon.craigslist.org/cto/d/sumpter-1949-willys-jeep/7391754773.html
“Nice little cj2a. Have been working on it but now priorities have changed. New water pump, break reservoir, points, plugs, rotor and cap and spark plug wires. Needs to hook a new fuel line from tank to fuel pump ( which also need replaced. the pump.). motor starts right up when you pour some gas into the carburetor. Great project if you want to restore or clean up and use as is. Mostly just surface rust. Only thru rust I’ve seen is in floorboard on passenger side, which has been plated under. If ad is up it’s available. CASH only and don’t need help selling and I’ve heard all the scams so don’t bother me with them.”
This has a Meyers-made Sears-branded hardtop with some Watson hubs.
https://greatfalls.craigslist.org/cto/d/loma-1949-willys-jeep/7384228733.html
“Willys Jeep in good condition. Motor runs great, brake work . It has been converted to 12 volt. Has aluminum top and doors. Body has a little rust but not bad for a 4”
This has a later Kelly hardtop.
https://portland.craigslist.org/clk/cto/d/battle-ground-jeep/7393095912.html
“1950 Willys Jeep. Runs and drives. Good restoration project. $6500 or offer”
UPDATE: This was for sale in 2020. Maybe it never sold or maybe being resold.
(11/30/2020) This has a brass data plate, but the only words I can make out are “For Business Use Only”.
https://hartford.craigslist.org/cto/d/coventry-e1949-willys-jeep/7393461921.html
“1949 Willy’s Jeep CJ3-A in awsome shape. All you have to do is enjoy. All of the work has been done. Here is a list of the repairs:
New Starter, new battery cables, new front and rear brakes, new emergency brake, new master cylinder, new clutch, carburetor rebuilt, choke connected, oil and filter change, new directional signals, steering shaft column rebuilt, reseal transmission and transfer case.
20,200 miles
No rust.”
UPDATE: Price dropped to $8999.
(05/28/2021) The body is fiberglass.
https://www.facebook.com/marketplace/item/350789533104781/
“Beautiful 1950 Willys cj3a (glass tub) fully functional 4WD lights rear blinkers. Original motor runs like a dream. Brand new brakes,fuel pump,and battery installed $10,500 obo”
It’s a pretty stock jeep for the PNW.
https://www.facebook.com/marketplace/item/996665434512286/
“This jeep is 90% original. Runs drives stops. New fuel pump. Very clean for its age. I just have to many projects and no covered area to keep it.”
Only the one pic provided.
https://reno.craigslist.org/cto/d/clio-1951-willys-cj3a/7375300614.html
“selling my 1951 willys Cj3A , it runs and drives, but It needs floorpan replaced.
I have a lot of new parts, I just don’t have the time to finish.
the body is in good shape, and looks to have the original paint.”
Lots of custom work on this stretched jeep. This may have a modified DJ-3A convertible windshield.
https://seattle.craigslist.org/est/ctd/d/issaquah-1952-willys-jeep-custom-off/7377672038.html
“This is an extremely custom 1952 Willys Jeep that has been extensively modified and is capable as a street, strip, or sand dune use.
It was a frame-off resto-mod project which features a boxed chassis, fabricated roll cage (certified), custom four link for rear suspension, and laser checked frame.
The engine is a professionally built (balanced and blueprinted) GM V8 Aluminum 406 ci / 7.0L block with aluminum DART heads, pro-comp high lift cam, Forged crankshaft/rods/pistons, and oversized oil pan. It has an Edelbrock intake manifold with 850 cfm Holley carburetor, Hooker headers with detachable mufflers/tailpipes