This has a murdered CJ-2A body sitting stop a DJ-3A chassis.

“1963 WILLYS DJ3 ROLLER NO DRIVE TRAIN, NO GRILL NO WINDSHIELD NO TAIL GATE. A DJ3 IS LIKE A 2WD CJ2. CLEAN ARIZONA TITLE”

https://phoenix.craigslist.org/evl/cto/d/1963-willys-dj3-willy/6416960805.html

UPDATE: **SOLD** Was $1200. Relisted here.

No engine or trany. Not a whole lot of parts value either.

“1958 Jeep/Willys DJ3A 2 wheel drive. Frame has been repaired and boxed. Tub is rough but serviceable, other body parts need minor work. Body tag and frame stampings match clear Texas title. All tires hold air for the smooth and easy flat tow to your place. This is a project (a roller) no engine or transmission, Don’t come looking expecting to drive it home. These accept everything from a big block to a four banger. No parts please.”

UPDATE: **SOLD** Was $3950. Might have been a Pepsi Surrey.

Per Colin, 56337 18392 1960 DJ3A Yellow, floor shift, some modifications, bucket seats, chrome windshield grab bars, chrome front bumper. Could this have been a Pepsi Surrey? Very close to numbers of other Pepsi Surreys. 

This is owned by Sherri and had the DJ featured in a magazine (Four Wheeler?). At some point, this jeep was stolen. It was returned to her in poor shape. It needs some restoration.  (At least, that’s what I understand based on the text below).

“Willys Jeep flat head 4 NOT 4Wheel drive, 3 speed shift
Old military style clean engine like new, needs tires & seats mounted, have bikini top,
I have owned 40 years originally restored (40 yrs ago) & was in magazines “jeep was stolen & left in a wash for few years” when I got it back I started to restore again! Was told 1945 registered & pink slip 1960.
Have original hubs W cromed, & more cromed parts for jeep!
Photos show older pics & current pics”

Appears to be 2WD still.

“1957 CJ4 Willys Jeep
Engine runs
Restoreable”

https://westky.craigslist.org/cto/d/1957-willys-jeep/6292093770.html

UPDATE: **SOLD** Was $2600.

(05/12/2017) Body looks great. Needs an engine and some other pieces. If this doesn’t come with the gas inlet, there’s one for sale on eBay. It’s a good price, too.  Seller also had a 1963 DJ chassis for sale. Interesting that it has a 0-10 speedo, which, if original to the jeep, would more likely make it an early 1956 model.

“1957 Jeep – Willys DJ3A. Rare 2w.d. “Dispatcher” model. Great candidate to restore as Surrey beach car. Major metalwork completed and presented in treated bare metal. Ready for finish bodywork and paint. Very complete except missing original engine. Has two transmissions, factory steps and curved front bumper. Rolls and steers. Clean Ariz . title. $2900.00. Also have another DJ3A rolling frame with matching 1963 title for $600.”

Listed as a 1950, I’d guess, based on that 0-9 speedometer, this is a 1956 or early ’57 DJ-3A.

“Here is a neat old 1950 willys jeep that runs fine. 2-WHEEL DRIVE. No rust. Check the pictures. $4,500”

UPDATE: **SOLD** Was $5500.

Bill shared this ad. Has a few updates.

“1957 jeep Willy civilian model, 2wd, original 4 cylinder 3 speed transmission on the steering column. Has been converted to hydrolic brakes runs great. I just use it to take friends around our property so it’s registered non op. Always inside and has windshield and snap on top.”

It is a project. Has updated engine.

“This is not a ridiculous or heavy project otherwise the word “project” is relative.
If I can get what I am in it so far, I’ll let it go. I did not lose interest in it. In my case, the problem is space otherwise I do not have another project needing this space but the wife wants to be able to park inside. We have a 3 door garage and so much STUFF in it. Happy wife/Happy life.
I am cleaning my garage and that’s why I could not approach it to take better pictures but I am just testing the waters right now and that could be good for a potential buyer to be the first to see it LIVE and hopefully ending up buying it because even though these kind of Jeep projects are overall in demand but with the bad pictures I provided, for now, I bet you it wouldn’t be appealing to many until I put some more and better pictures next week.
I bought this a couple of years ago from the widow of the 68 y/o owner who suddenly died of a heart attack. he was fixing it putting new drums and brakes which are still in the rear cargo area. The Jeep has 52,000 miles on the body but he put an old Chevy motor from the late 50’s in it which could be from a Corvette of those years. The seats are all intact with one little tear but since they are old, I think they should be redone. It has some surface rust and little rusted through only on the driver side floor panel.”

https://portland.craigslist.org/wsc/cto/d/jeep-dja-project-with-late/6230139272.html

UPDATE: Price dropped to $1400.

https://seattle.craigslist.org/oly/cto/6167288254.html

“I am selling my 1962 Jeep DJ3A project. It was originally a hard top mail jeep that was long ago converted to a normal CJ3A, with patches covering the original cutouts in the tub and an M38 windshield.

The frame is the original DJ frame (verified by stamping numbers) that has been fully boxed. It has recently been sanded, rust treated and coated. It has a square tube front bumper.

The Jeep was converted to 4×4 in the 70s, run by a couple owners, and then taken apart by the previous owner in 1981. The tub and all sheet metal was stored inside gathering dust until 2016 when I purchased it after he passed away. As a result of that, the tub is almost completely rust free, save for two small spots toward the back of the wheel wells. The original running gear (save for rear axle) is gone.
Continue reading →

UPDATE: **SOLD** Was $2500.

Glenn’s selling his DJ-3A he named “Miss Willy”. Ann and I rode in it back in 2013, shortly before someone hit Glenn while driving it. Miss Willy was the 122nd one produced after our newest DJ-3A convertible “Paterson” (10366) and only 50 units before “Rusty” (10538). Like Paterson and Rusty, it too has the convertible body. Glenn’s hoping a DJ-3A lover will restore it.

“Miss Willy, a 2WD early production 2WD Jeep, was wrecked almost two years ago. Health issues have prevented me from rebuilding this California beauty. An almost perfect rust free body, nice floors and hat channels, a few scratches from flipping on its side, has frame, hood, windshield, fenders damage and probably some hidden problems. Brakes left 4 perfect skid marks in the wreck. Interior is usable and pretty. No Engine or Radiator included as I used them in another project. I shipped this from California awhile back so it’s an easy rebuild. Use your ideas and parts or I have a total of seven of these DJ3A’s to provide anything needed at extra cost. I can deliver this to you for reasonable cost as I’m going to The Great Willys Picnic in Kempton (Allentown) PA on June 11, 2017. The price is $2500 CASH. Open CA Title. Email for contact / details. Here’s wreck details from a favorite Willys Site:”

Runs. Based on the speedometer, I’d guess this is a 1957.

“Here is a neat old 1950 willys jeep that runs fine. 2-WHEEL DRIVE. No rust. Check the pictures. $4,500. FIRM.”

https://wichita.craigslist.org/cto/6142986592.html

This is going to be interesting. We are heading to Salt Lake on Thursday, then to California this weekend …. another adventure awaits. #AlaskaorRust