Features Research Archives

To Top

Fiberglass Flat Fender Racing bodies — Southern Ca $1200

• CATEGORIES: Features, Racing, Vendors

I’m not sure what the exact story is here (might be a vendor?), but these look brand new.

Flat Fender Style One piece fiberglass Jeep bodies. Call Matt for complete details. (909)239-8463

 
To Top

Blueprints for Willys

• CATEGORIES: Artists/Drawings, Features, Website

Here's an interesting site I found. Blueprints.com  claims to have over 24,000 automobile blueprints online (though they appear more like a single drawing rather than full blueprints), including a variety of jeeps.  To the right is a jeep labeled CJ-4.  The site manager states:

"I do not claim to have made, scanned or drawn all of the blueprints on this website. I did on the other collect, edit and host all of them, free of charge, in my spare time.

Continue reading

 
To Top

My Build – Fender Update

• CATEGORIES: Biscuit, Features

I made good progress over the weekend. As you can see, I was able to mount the fenders and take a few shots of the jeep with the fenders.  It will look good.

In order to fit the fenders, I had to make cutouts in the wheel wells for the headers.  But, as I mentioned in an earlier post, I wanted to fill around the headers.  So, I bought a little bit of stove pipe and used that as a form to wrap fiberglass around the headers.  

The last pic is the fenders with the new covers for the headers.  To match the rest of the underside of the body, I'm going to paint herculiner on the wheelwell of the fenders (which saves a bunch of finish work) and fill in the gaps and paint the top and inside of the headers.

Here are some pics below.

Continue reading

 
To Top

Reader Pix — David’s Parents at the Sand Dunes

• CATEGORIES: CJ-2A, Features, News

A reader named David has shared an old picture of his parents racing around the sand dunes in what looks to be a CJ-2A.  This picture is a good reminder that you don't need a fancy jeep to go out and enjoy a day in the sand.  David will be sending a few more pictures along with some background text soon.  Thanks David!

 
To Top

Why a Roll Cage is a good idea

• CATEGORIES: Features, News

Take one look at this photo and you can see why having a good roll cage is smart.  The driver of this jeep, 63 year old Alvin Baldwin, died in the rollover after being ejected.  The link to the original article no longer exists.  It occurred outside Virginia City.

 
To Top

Drive Cycles and Emissions

• CATEGORIES: Features, News

Well, I learned something new today:  Drive Cycles …. 

A couple days ago my 1997 BMW 540i failed an emissions test (for the second year in a row).  Last year I had shown enough money spent on the engine to get a waiver.  This year, I was a little nervous because I didn't know whether they'd give me a second waiver or not.  (This vehicle is a blast to drive and a PIA to take care of or work on!!)

Well, I just got done speaking with the head of the Air Quality Testing for ADA County, my new friend Roger (I have to say that it's nice to be able to talk to the head of the department — that's one nice thing about living in a small populated state).  What happened was not that I failed, but that they couldn't read my car's computer.  The reason was that I have not completed a drive cycle since the last time I reset my car's computer codes (Any time I work on it, I reset the codes to see if I have fixed the problem).  I figured anytime I got into the car and drove it that the computer would be on and recording normally.  However, until a drive cycle is complete, none of my monitors (which are really groups of codes) are actually capable of being read.  So, Roger, who said he consulted with the EPA back in 1992, said he had a good deal of insight into what constituted a drive cycle.

Continue reading

 
To Top

My Build – Operation Fender Length .. cont

• CATEGORIES: Biscuit, Features

I made a good deal of progress with the fenders yesterday.  I created a series of mini molds and fiberglassed several times in different sections to successfully capture the right angles.  So, step 1 is complete.

Today I'll be drilling and mounting the fenders so that they fit correctly.  One issue I have to surmount is that the slope on the fenders seems slightly different than the slope on the mount on the body, but I'm sure I can work around this issue.

Once fitted, then I'll have to create the cutouts for the headers and then create the new walls so that the headers are enclosed.  Unlike metal fenders, which wouldn't lose too much strength when cutout for headers, the fiberglass will benefit from having that extra strength.

After the final modifications are made, I will be to run a second coat of resin and cloth along the entire underside of the fenders.  This will create a smoother look and strengthen the fenders considerably.  

The final step will be to use some filler and gel coat to smooth off the top surfaces — then I'll be ready for paint. 

 
To Top

Fixing a Dented Exhaust Header

• CATEGORIES: Features, News

Have a dented header you want to fix?  While combing the internet for advice on making my headers work, I came across this interesting solution for fixing dented headers.  It involves water, a freezer, and some time.  Note: I have not tried this, so cannot speak for its effectiveness

Fixing a Dented Exhaust Header 

 
To Top

My Build — Operation Fender Lengthen Started

• CATEGORIES: Biscuit, Features, News • TAGS: .

I've started the process of lengthening my fiberglass fenders. I've determined they need to be extended 4.5". 

My first task was to clean the fenders.  This yielded a surprise:  Business cards from the builder of the body were embeded into both fenders.  To the right a shot of one of them. The information suggests the seller was H.C. "Van" Wagner out of Puyallup, Washington.  He sold Custom fiberglass products including Bobcat products.  The name of the company has faded, but I have the address and phone info.

Once the fenders were cleaned, I cut them in half and I cut out the indent (traditionally for the battery) out of the passenger side.  Once they were cut, I tapered down the cut pieces.  To the left are the cut fenders.

The next step is to fiberglass them.  I'm going to try laying down a layer of gelcoat and then lay the fiberglass over the top of it.  I' haven't used gelcoat in my previous patching jobs, but am trying to gain experience so that I can use it when I do my custom hood project. 

 
To Top

Craigslist — A study in honesty

• CATEGORIES: Features, News

As a number of readers can attest, I've done a variety of craigslist deals (probably close to 40).  This time, I had a '73 CJ-5 radiator I wanted to sell, so naturally I listed it on Craiglist. A potential buyer contacted me and said he was very interested, but couldn't come look at the radiator until after I had left for Seattle.  So, I told him I would put the radiator outside and if he wanted it, to put the money into an envelope I pinned to the house.

Sure enough, two days later the radiator was gone and the money was inside the envelope. I was happier about the honesty than about the money 🙂

In fact, I've only had one deal where I didn't get all my money.  I swapped a dirty 350 Cadillac motor I really didn't want for some guages, competition coil and a few other parts.  The kids I swapped with was maybe 18 and didn't have a way to pickup the engine, so I said I'd charge him gas money to deliver it.  When I got there he said he didn't have the money yet, but would mail it.  Unfortunately, despite a couple reminders, I still haven't gotten the money. I plan to stop by his house next time I'm driving by (he's over an hour away) and remind him in person again.

 
To Top

The Former Pittle Power

• CATEGORIES: Builds, Features, News

I just got some pics from the owner (who shall remain nameless until he sends me his name 🙂 ) of the jeep formerly known as Pittle Power (I remember it as Piddle Power though).   I don't remember the history of the Jeep prior to Jim and Patty Carter purchasing it, but I believe they purchased it so their growing boys, Tim and Steve, wouldn't have to squish themselves into the back of Otis.  They purchased a stock CJ-3A, installed a chev 4cyl and attached desert dogs.   Otherwise (I'm told) they left everything else stock.  Pittle might not have had much power (hence the name), but it could go 99% of the places the modified WWJC jeeps could go.

The Carter's had a habit of naming all their vehicles.  There was Otis (the jeep), tote-us (the jeep trailer), Brutus (their first motorhome) and more.

Our To-Be-Named contributor writes:

"The Jeep I bought was owned by Jim Carter(original member of the WWJC). The race name was Pittle Power. Skip Baird helped me with my first swap with a V-6 and a top loader. Al Hamilton and I became very close infact I still have one of his pups Mandy she is a very stubborn German Shorthair."

Editor's note:  To the right is the only picture I have of Pittle Power from 1983 (and it's only the hind quarter) hidden behind Danny's CJ-5.  While the Pittle Power was never actually raced, I do remember a club trip to Liberty Trail one weekend.  After we made camp, Tim Carter decided he wanted to head down to the store and asked me to ride shotgun (somehow he knew there was a remote store at the bottom of the hill we were camped on). So, he drove me down that hill in Pittle Power, a ride I remember vividly because we were travelling sideways down the constantly turning gravel road for a good portion of it.    Come to think of it, one time Tim took me for a ride in his late 60's camaro and we travelled sideways heading onto the cloverleaf on ramp to I-405.  Maybe Tim always travelled sideways or I just brought it out of him.

 
To Top

Fiberglass Body and Grille

• CATEGORIES: Biscuit, Body Parts, Features • TAGS: .

Here's a few pictures of the Body and Grille I grabbed while down in Springfield, Oregon a couple of days ago. I need to get a few better pics of it.  I've got it listed for $450 on Craigslist.  

The outside of the body is in excellent shape and would make a great racing shell for PNW4WDA racing. The interior of the body is well designed and strong and could make a good jeeping/street body, however the plywood attached to the bottom is bad in spots, but could be fixed pretty easily.  Also, the firewall has an extra large opening that needs to be closed.  Otherwise, the body looks straight and is pretty light.


Continue reading

 
To Top

Willys Woodies

• CATEGORIES: Features, GPW (Ford MB), MB, Website, Willys Wagons

I wandered across this website in 2008 that showcases old woodies.  There’s a jeep section with a variety of woodies. The woodie at the bottom is made from an old MB/GPW.

“A French coachbuilder’s modification of the American Jeep into a wood-bodied fire fighting squad truck is similar to the work of Duriez.”

See some other old willys woodies here

 
To Top

My Build — Transfercase Shifter

• CATEGORIES: Biscuit, Features

While you can purchase a dual shifting unit from Novak for your Dana 20, it's also possible to fashion one from scratch.  Note that I've never used the dual shifter on a Dana 20 transfercase without removing the center pins that move between the shift rods in the the shifting tower.  To remove the pins, you have to remove the shift levers, drill out the plugs on the sides (note where the red gasket sealant is on the side of the shift tower, and then slip out the oblong pins (they are elongated metal balls).  With these removed, you can push and pull the levers all you want (but don't try running high range in the front and low range in the back unless you feel the need to break something).

 
To Top

How the transfercase shifting works

• CATEGORIES: Biscuit, Features

There was a question about how the shifting in my transfer case works.  (http://www.ewillys.com/?p=797)

The shifting might seem unusual, but it's not.  What's unusual is that I have removed the pins from the shifting tower that slide back and forth between the shift rods.  This allows for more shifting options.  To take advantage of those options, I installed two rather than one stick.   You can see that here in this video I made.

Here's an image the also demonstrates how the shifting works.  Please note if it doesn't make sense:-)

 
To Top

Builds — Brian’s working furiously on his CJ-3B

• CATEGORIES: Builds, CJ-3B, Features

Brian sent me some updated pictures of his CJ-3B project.  He just finished reversing the springs in the front.  As a part of that reversal, he had to replace the front of the frame.  After conquering this task, he turned his attention to the rear differential, only to discover a big problem (which he'll update all of us about as he progresses through the issue).  

Brian explains more below about his spring reversal experience below …. 

"I wanted to do a spring reversal so I started by getting some universal after market parts to make things a little easier. Then I bought a early Cj5 frame for the front 8 inches then sold off a chrome bumper and ring and pinion at a small profit.

Here's what I did to lengthen the frame.

I cut a block to use as an template to cut off the front of the 3b frame. (Stan H. — from the Wandering Willys Jeep Club — always said to cut at a 45 degree angle though the frame.) I did the same with the pieces to be added. They lined up really nice.  

Continue reading

 
To Top

My Build — A Custom Data Plate

• CATEGORIES: Biscuit, Features

Yesterday I made a first pass at a design for the gauges on the dashboard.  As a part of that exercise, I tried to find a space for the data plate I have.  The data plate is original to the CJ-3A I have and in good shape, except that it is faded, so it is hard to read.  In fact, I tried to scan it into my scanner and the scanner couldn't pick up the words or pictures at all.  After pondering the situation, I decided to recreate a data plate graphic and take it into a print shop to see if I can make a raise print or sticker of some kind.  As part of the customization, I've tried to recreate the fonts as closely as possible, however, much to my surprise, the data plate uses several different fonts, some of which are the same font but stretched or bolded or both.  Also, I've updated the data plate to better reflect the drive train I have installed.

Here's the current favorite mockup so far (note the font kerning and arrangement will be more precise on the final high resolution version).

 
To Top

Old Jeep and Jeep attachment Brochures

• CATEGORIES: Advertising & Brochures, Features, Website

cj3b_brochure2UPDATE: It appears this site has changed — at least I don’t remember it quite like this …

The “Jeepsterman” Morris Ratner has a variety of old brochures for sale on his jeepsterman website.  You can see an example of one of those to the right, which is about the roper digger.   Did you know the roper digger can be used in multiple ways?  Now you do …  Another interest brochure compares the jeep to the scout.

See all the Jeepsterman brochures here

cj3b_brochure1

 
To Top

My Build — Power Steering Hoses

• CATEGORIES: Biscuit, Features

I found a very helpful article from a toyota landcruiser owner at offroad.com about building custom power hoses.  In the article he provides pictures and a list of parts he used from Summit Racing.  Unfortunately, his part numbers don't correspond exactly to the numbers from the Summit Racing catalogue I have, but they are close enough to guide me correctly.  

To do my build the way I want (which is routing the power steering through the cross member) based on this article and the new summit racing catalogue, I believe I would need:

5 -6AN EAR-309106ERL 90 degree bend tube $16
2 -6AN EAR-300106ERL straight $7 each
2 -6AN EAR-983206ERL Straight Bulkhead $4 each
1 6AN to 11/16-18 Not sure on part number yet approx $7
1 –6an to 5/8-18 Not sure on part number yet approx $7
-6an power steering 6ft perform-o-flex hose EAR-406006ERL $45

That's a grand total of $161.  If I only do the power side, I can cut this amount in half.  I'm gonna talk to the folks at my local hydraulic store and see what they can do for me. 

 
To Top

My first build — Old pix emerge

• CATEGORIES: Features, News

I assumed these pictures were lost, but they appeared in a trunk my ex-wife kindly gave back to me.  The first pic is a good shot of my first jeep’s roll cage.  The second pic is a pre-paint job pic of my first jeep stuck in the Rabbit Hole, a small mud pit at the Eastern edge of the Naches Trail.  The third pic should come with a caption “Oh does my nose hurt!”.  The fourth pic is a great shot of the jeep parked at Roche Harbor Resort on San Juan Island (Washington State) while working there in 1987.  The final pic shows the down side of oil pressure problems — broken rod, piston, and other parts.

 
To Top

Builds — Mike Hardesty’s 1951 CJ-3A

• CATEGORIES: CJ-2A, Features

Mike got a deal on a $530 CJ-3A, but buying it was the easy part.  Mike's built an extensive website called Jeepchasm that follows his extensive rebuild from a cheap deal to best of show.

"We hope this site will serve as a resource and an inspiration to others who are interested in vintage Jeeps and in Jeep restoration. We will post and update links to various Jeep restoration resources on and off of the Internet. We will let you know where and how we found our parts, and the obstacles and challenges we had to overcome."

Visit Jeepchasm 

 
To Top

Builds — Craig Ellis’ M-38

• CATEGORIES: Builds, Features, M-38

I don’t know whether Craig is finished with his jeep or not, but he certainly had some terrible rot to deal with.  I’ve linked to the ‘Golden Triangle Jeep Club’s’ bulletin board for this Build story.  Below is the pic of Craig’s M-38 body:

you could draw a line down the middle of the body and replace all of the driver’s side floor to be safe. i’m gonna avoid catalog bought floor panels and construct my own from 16 gauge sheetmetal along with new crossmembers. i got a pair of Wagoneer Dana 44s last weekend and am working on the suspension, which will be stock waggy leafs in the front and YJ leaves out back. I picked up a Chevy 4.3 V6 to use and can’t decide on which tranny to go with, but i’m thinking SM465 b/c Novak offers a really short adapter to the Dana 18 case….”

View all the rest of Craig’s pics and related comments (10 pages) as he works through various issues.

 
To Top

Builds — 1943 MB

• CATEGORIES: Features, MB

Andrew McGraw (and friends) gave new life to a beat up 1943 MB (to the right is an 'after' pic).  The only before and after pics are of the engine compartment, but the differences in those two pics is pretty dramatic.

"The Willys MB project was a feat in that it was completed in about 2 months. Having been in my friend’s family for many years, they were looking to do a restoration/upgrade on it.

It had undergone so many repairs and body modifications over the years. That fact, combined with the cost and relative impracticality of a full authentic restoration led to the decision to rebuild and modify. If I were in charge of the finances, I would have at least upgraded the powertrain/drivetrain to that of a YJ, at the minimum. A fuel injected 5-speed MB would be awesome. However, I wasn’t in charge of the finances or major decisions…."

http://www.ckmcgraw.com/afmcgraw/MB.htm 

 
To Top

My Build — A couple cracks in the engine plan

• CATEGORIES: Biscuit, Features

Lyle from Bob's Mechanical called me today.  He left a message on my phone asking me to call back in a tone that made me wonder whether a relative of mine had died!  Turns out, the news was worse;  Both of my heads had one crack each between two valves. You can see one of these cracks in the picture to the right. 

Fortunately, my $50 engine had 2 good heads, though these heads weren't ported nor did they have their valve guides machined, they did have better seats.  Best $50 I've spent so far!  

 
To Top

Are Sand Dunes a favorite for Jeeping?

• CATEGORIES: Features, Website

The American Sand Association operates a nice website with plenty of information about sand dunes across the United States. Here’s their bulletin board.

The mission of the American Sand Association is simple: “Unite, Inform and Mobilize: We accomplish that mission throught the use of the volunteers. We believe in responsible resource management for the people. The American Sand Assotiation supports a national cooperation of local and regonal sand sport organization and shares with them ideas and infomration to help them Unite, Inform and Mobilize.”