Looks like a good price.
https://missoula.craigslist.org/pts/d/missoula-willys-cj3b-half-top-top-only/7684537549.html
“Steel Koenig half top and doors. Glass good.”
Looks like a good price.
https://missoula.craigslist.org/pts/d/missoula-willys-cj3b-half-top-top-only/7684537549.html
“Steel Koenig half top and doors. Glass good.”
Update: Price dropped to $2000.
These CJ-6 tubs are rare.
https://www.facebook.com/marketplace/item/362065996350197
“CJ6 fiberglass tub, fenders, hood and windshield frame. Never painted. Tub never installed. On a 72 jeep commando frame with springs. No axles, no engine, no trans or t case. Grille included. Dash panel and manual pedal setup included.”
I just happened to run across these hubs. That the box is included suggests they might not have much wear.
https://www.facebook.com/marketplace/item/227114210208748
“Fits jeep/ Willy’s great condition in original box asking 50 obo”
Ricky is selling this Ford Pinton engine. The sale includes Novak conversion kit to attach to a T-90.
https://www.facebook.com/marketplace/item/720930952897232/
“Includes a Pinto motor with approx 15k miles from a Ford Shay kit car and is on a motor stand and just needs to be wired to run. No documentation but motor spins freely, has good compression, and is in really nice shape. Have the rare bellhousing that bolts up to the Willys T90. Comes with a new Novak conversion kit to bolt to the T90. Comes with a brand new Summit oil filter conversion kit if you need to relocate the oil filter. $750 for the package, I wanted to install this in my Willys but realize I will never get to it since my original motor runs great and I’m well, to lazy to do it”
This seller (Midwest Military) currently has three-sets of these rare Clary Flanges for sale, priced at only $60 per pair.
View all the information on eBay
“NOS pair of front axle drive flanges for all the CJ jeeps as well as the M38 and M38A1. These hubs do not have the splines in them so you are always in 2WD. Bearing in the center of each hub instead of splines. You are buying 2 flanges per transaction. Mint condition.”
UPDATE: **SOLD**.
The Transport Company out of California manufactured some aftermarket jeep parts during the latter 1940s, including a lift, a hydraulic pack, and more. This is a very rare Jeep & Tractor Power Pack.
Andy spotted this utility box for sale. I’m not sure of the manufacturer.
https://www.facebook.com/marketplace/item/1484306378803118
“Utility box from a 1954 willys truck. Needs som repair but pretty solid. Will trade for fire wood or snow plow.”
This appears to be a CJ-5 hardtop.
https://www.facebook.com/marketplace/item/203148599459876
“Koenig hard top for jeep”
It’s unclear to me what this is supposed to be, but it’s only $200. Might make an unusual looking racer.
https://www.facebook.com/marketplace/item/215571604853146
“”HJ-7 / Hum-J” Fiberglass body kit for a Jeep CJ, YJ, TJ. Never installed, but has sat outside for years. Cash in person only”
The seller has the governor handle, but not the governor assembly (if I understand correctly).
https://spokane.craigslist.org/pts/d/spokane-cj-jeep-pto-belt-drive/7681455740.html
“1949 CJ3a PTO assembly with the Belt Drive adapter.
Still currently mounted in the jeep so it can be used and shown to work, planning on pulling it sometime this month. Only thing missing is the Novi Governor under the hood. I don’t intend to restore this jeep to factory and it doesn’t suit any need I have other than looking really cool.
This PTO should mount to any CJ jeep or most older Jeeps that have the Dana 18 transfer case from what I know.
I’m selling just the PTO assembly, not the whole Jeep”
TJ forwarded this ad. This seller has a range of parts for sale, but also repairs and rebuild jeeps. I have not familiar with this person.
https://www.facebook.com/marketplace/item/205142272690879
“Rebuilt L134 or F134 engines dressed as pictured…$3500 ea. Also, lots of WWII MB/GPW & civilian CJ Jeep take-off & repro parts. And full jeep repair or rebuild services.”
Brian spotted this ad. Nick’s doing some fall cleaning and has parts available. He is selling this as a single lot.
https://www.facebook.com/marketplace/item/315180807820329
“Spring cleaning in October. Not responding to is this available. These are ALL the parts I have available for sale, nothing else. Only selling as a single lot – no parting out, no shipping. -All the wheels are 5×5.5. Some are CJ5, some wide, etc. -F134 engine that turns over. Compression is 70-65-70-95 -Sears locking hubs -Dana 41 rear axle -Either Dana 25 or 27 front -3 Novak adapters to fit a D18/20 to a T18 trans on an IH Scout -Grilles, tailgate, hoods for decoration -3 T90’s with D18’s -Bunch of misc parts”
I can’t tell if the fenders are pre or post 1972.
https://www.facebook.com/marketplace/item/5479162385517190
“Jeep Cj5 body fiberglass with fenders and extra body parts never used just dusty. No windshield include”
Dave’s selling this Kelly hardtop.
https://www.facebook.com/marketplace/item/201313679630100
“Kelly top for a cj6. In rough shape. Most glass is bad. Roof was banged up some. Been sitting in the weeds for a bunch of years. 250$”
Update: **Sold**
“Ror sale, Arctic Cab that fits an M38 Jeep or a CJ-3A. Asking $200. It has all the components except there is no windshield. It needs a windshield with straight legs that mounts straight up and down. All the panels and the doors are insulated with high density foam. You can see the insulation in the photo of the inside of the top. All mounting hardware and nuts and bolts are included.”
This setup looks interesting.
https://www.facebook.com/marketplace/item/1318781805420844
“T96-1A 3 Speed With Overdrive Transmission R10B-1E Jeep Willys transmission with a spicer 4-9-67???”
Tom spotted these OEM Jeep Seat Belts. They ship for $13.50.
https://www.facebook.com/marketplace/item/306502398757190
“Nos willys jeep optional seat belts 250”
UPDATE: Barney provided these pics of the compass from his 1962 leatherette dealer intro book for the J-series dated 1962.
==============
Maury shared this ebay auction. I wasn’t aware these existed. With 7 days left in the auction, the bidding has already reached $256!
View all the information on eBay
“This is a: NOS 1960’s Jeep Dash Accessory COMPASS ASSEMBLY KIT Factory Part 933536 RARE. This compass is in good, unused condition and appears ready for installation. It shows no signs of ever being mounted or used. The compass is working well, as intended. This kit comes complete with mounting bracket and hardware. The body is green in color which appears to be one of 3 different colors offered, according to the instruction sheet. The paperwork states this to be correct for J-Series applications and is dated 1963. This is a must have for any serious Jeep collector or restorer. This is the first new old stock Jeep compass I’ve come across in my many years of collecting parts. This will make a great addition to your classic restoration project.”
UPDATE: **SOLD**? Was $550.
“Vintage Signal Corps BC-659-J radio with with Signal Corps Case 79-A. The radio is missing some of the crystals and other components so not in working condition. The radio is period correct for WW2 military vehicles and Willys MB/GPW. I’m not sure if the Case 79-A is WW2 or post war. Both leather handles in nice shape and very solid, canvas straps and clips solid, power cables in great shape – nice and flexible.
Would like to sell as a set for $550 but can sell BC-659 radio separately for $450 and CS-79-A for $150.
Due to what the scammers get away with, am selling strictly as-is and as photographed with no returns, this is the exact set you will receive, please see the many photos for what is here, and ask any questions. LARGE AND HEAVY, will help pack it for for shipment (paid separately by the buyer) and of course local pick-up is always welcomed.”
This early CJ-2A Koenig top includes the rear delivery door option.
https://cookeville.craigslist.org/pts/d/crossville-willys-jeep-hard-top/7665307433.html
“Hard top for Jeep Cj2A(Top Only). Roll-up windows in doors. Barn doors in back. Sliding windows in side of top.
$400. OBO.”
Gus has been restoring a CJ-2A that he found on eWillys. Now, he’s got some parts to sell.
1: T-90 and Spicer 18 $500: https://jerseyshore.craigslist.org/pts/d/neptune-cj2a-transmisson/7674062983.html
2: CJ2A PARTS (PRICE MOST TAKE ALL) – $400 https://jerseyshore.craigslist.org/pts/d/neptune-cj2a-parts-price-most-take-all/7674062470.html
“2 transmission bell houses sandblasted and primed
2 fly wheels
2 copper radiators
3 manifolds
1 go devil engine head
Back hitch-pto accessory
tie rods
Radiator shroud
Transmission (rough shape either for parts or can get it going with work)
Transmission shifter
STEERING GEAR BOX TUBE & WORM GEAR
BACK AXEL IN BACK OF PICTURE NOT INCLUDED”
I believe this is a Jiffy cab model, but I don’t remember being able to disassembled it quite so much. Maybe I’m just spacing that.
https://www.facebook.com/marketplace/item/292998816714061/
“Complete Cab for CJ3B jeep. Includes all the glass but 1 side panels glass is cracked.”
Not easy to find these, but not much demand either. Seems a good price.
https://www.facebook.com/marketplace/item/839706230931737
“Center seat sand drag body and Jeep bare frame , older lightened Jeep frame ladder bar and spring mounts . Nothing but body and frame . 400 or maybe trade for small dirt bike”
The two front seats and cage would be hard to duplicate at $600 if you have a 3B and want all of it.
https://phoenix.craigslist.org/wvl/pts/d/wickenburg-jeep-willys-cj3b-full-roll/7659351382.html
“Full family style roll cage with 3 race buckets with covers. May trade for ammunition or firearms. No reloads! Don’t contact me on ad if you are not willing to drive to Wickenburg. Seat mounts are tied into cage. Please don’t ask stupid questions like is Jeep included.”