I believe the is a Koenig half top. Looks like a good price.
https://syracuse.craigslist.org/pts/d/elbridge-cj3a-or-jeep-hard-top/7564502690.html
“cj3a or b jeep hard top. steel top all parts there.”
I believe the is a Koenig half top. Looks like a good price.
https://syracuse.craigslist.org/pts/d/elbridge-cj3a-or-jeep-hard-top/7564502690.html
“cj3a or b jeep hard top. steel top all parts there.”
Looks little used. I wonder if this is a reproduction?
https://nh.craigslist.org/pts/d/bradford-willys-extender-bed/7565289633.html
“Selling a Willys CJ to A
Bed extender
Turn your CJ to A into a pick up
Asking $850”
May be worth a look.
https://nh.craigslist.org/pts/d/bradford-willy-parts/7564927811.html
“Selling a drum pulley
Governor
Power takeoff
For a 1947 Willy’s
Asking $2500”
UPDATE: Still Available.
(11/27/2022) Steve shared this ad for parts.
https://newyork.craigslist.org/stn/pts/7550899150.html
“For Willys MB (1943), an engine block, a head, transmission (no cover plate or shift stick), flywheel, bell housing, rear and front axel, radiator, and much miscellaneous (but no body parts). Take all or some.”
Update: **Sold**. Was $995
Tis plow time (at least here it is).
“This is a complete 6′ plow setup with original brackets to fit the Cj2a and will fit Cj5’s up into the sixties. It is in very nice condition. It has an original 6V Meyer electric lift pump with solid cable. The plow and rig are located 10 miles from Hershey, PA. Please email me if interested and thanks for looking”
Unclear how much value is here.
https://akroncanton.craigslist.org/pts/d/orrville-willys-jeep-cj2a-l134-go-devil/7553934022.html
‘This motor is from a 1946 CJ2A that I purchased in 1994.
Jeep was sold long ago.
The motor number is CJ 2A 25623.
Motor is frozen, will not turn.
Missing carb and distributor.
Dirty and rusty.
Selling AS -IS , for parts, rebuild or core.
See photos for condition.
Please reply via Craig site relay Email link above or call.
No text messages.
No shipping.
Cash only
If you still see this listing then the motor is still available.”
Glenn’s got a variety of parts for sale.
https://maine.craigslist.org/pts/d/smithfield-willys-jeep-junque/7552849998.html
“FLAT FENDERED & HIGH HOOD CJ3B’s. (7+) I’ve bought too much and just can’t haul the extras in for scrap. Rolling chasis as shown $250 loaded on your hauler, Usable frame -$100, Front or Rear Axles- $100 each, F-134 & l-134 engine- $100 each, Radiator – $100, Transfer case $100, little pieces, much already disassembled, if you are building a flat fender CJ2A, CJ3A, CJ3B (1945-1964) you should come by to pick my bones before snow comes. Some parts may fit other models. Got some nice Driver Quality WILLYS ( AERO) too if you don’t want to build yourself. Willys Jeep Special Equipment stash. Playin’ with Willys history, toys and literature for 60 years. No place to store this extra stuff. Contact to discuss.”
This is missing the rear door and driver’s door.
https://www.facebook.com/marketplace/item/3281528005508315
“Koenig iron works hard top for a flat fender. Missing rear door and driver door. In good shape no holes from rust. Still has original tag. Coming off a parts jeep. Make offer”
Seller indicates this would fit a 2A, but it would do so poorly. The top is disassembled and a little rough, but the price seems good.
https://www.facebook.com/marketplace/item/442005044762914
“Jeep hard top which needs restored. Pretty solid and all the glass is in it. Have metal doors to go with it but need restored as well. The door glass is there. The top and doors were disassembled to restore but got a different top, so did not finish the restore. This is a FCFS and no holding. If it is listed then it is available and when it is sold it will be marked sold. I believe this top is for an older jeep CJ5 but will fit others. I have had it on my CJ5 but I am sure it will fit a CJ2a as well.”
Glenn shared this front frame and axle that includes some Perfect Circle Hubs. Perfect Circle was a longtime piston ring company bought by the Dana Corp in 1963. Dana had tried marketing the HubLok hubs, but likely switched to selling these private labeled Dualmatic/Selectro hubs after the merger. More on the Perfect Circle history: https://www.waynet.org/waynet/spotlight/2003/030521-perfectcircle.htm
https://www.facebook.com/marketplace/item/3108393642795119
“Front frame section from a 1956 Cj5 Willys Jeep. Section is in good shape and comes with steering linkage and good front springs and axles. Located in Harwich Mass”
Don is selling these Hy Lo parts. Hopefully, someone can use them.
https://charlotte.craigslist.org/pts/d/shelby-hy-lo-willys-jeep-snow-plow-parts/7555774924.html
“Hy Lo Jeep Snow Plow parts removed from a CJ3A Jeep but may fit other models. Most everything except the blade. The hydraulic cylinder would move up and down before we removed it and other than that we know very little about these. $150 Pick up in Western NC Unable to ship.”
Rob’s selling these three hardtops. All fit CJ-2As. One hardtop includes rare vertical doors. The ad is on FB, but you can contact him via email at rob @ humblerootslandscaping.com (remove spaces around the @).
https://www.facebook.com/groups/1580466258809022/permalink/2096085677247075
“I have three complete Koenig Model 330 steel full hard tops for sale. They all fit CJ2A’s. Normal wear and tear for 70+ yr old Jeep tops. Only rust through are minimal spots on a couple of the sections that bolt to the tub. Two exterior door handles missing. All interior window mechanisms complete and present. The black top has rare rear ambulance doors.
Buyer could piece together a fantastic top simply by mixing and matching panels from each top or with even a hint of metal working skill could easily restore all three tops and sell for a healthy profit.
Would like to sell all three as a package deal. Buyer must collect but can help with loading. Please note the tops are just tacked together and on uneven ground for display purposes only.
$1,200 cash. Price is firm. Located in Asheville, NC.”
Dave saved this Sears/Allstate (likely) branded half cab from a neighbor. He has no use for it, so thought someone on ewillys might be able to use it. He is given it away, but don’t be shy about kicking him some coffee money as a thanks. Email is 45fordgpw @ gmail.
Dave wrote, “I was driving my GPW here in town a few months ago when a lady stopped me. She asked if I’d like to take from her a WW2 jeep hardtop. I took her up on the offer to view it, knowing such a thing didn’t exist. She lives over in Ben Lomond and was going to scrap it at the dump, so I rescued it from her. I know next to nothing about these post war hardtops, but figured you’d be a great person to contact. There are no data plate or markings that I can find. It’s thin gauge but very well made. Half-tops, or pickup tops, we used to call these. Plexiglass is still in one door. I like the hooked stops welded inside the door to rest the glass in different open positions. It’s dirty, with peeling paint, but very salvageable.”
It does not appear to have the doors.
https://www.facebook.com/marketplace/item/571499974748215
“I have a 1960-1970 cj5 jeep hard top for sale shoot me an offer”
The 327 is supposed to be rebuilt.
https://www.facebook.com/marketplace/item/697893137975192/
“1968 Jeep AMC motor 327 ci rebuilt in crate and 1968 Jeep auto. Trans.and transfer case. For more info PM me and I will give you the contact number. If the post is up it’s available., will not answer to is this available.”
Gary is selling a variety of grilles. You can reach him at gkeating1 @ comcast.net (remove spaces around the @).
“I HAVE SEVERAL ORIGINAL TAKEOFF/USED WILLYS AND AMC JEEP CJ2A,CJ3A,M38,CJ3B,CJ5/CJ6 GRILLS.
THEY ARE ALL HANGING IN MY GARAGE AND HAVE BEEN FOR YEARS.
MOST ALL HAVE EXTRAS SUCH AS SOME LIGHTS, WIRING, TRIM RINGS, ETC, AND ALL ARE VERY USEABLE AND FIXABLE. SOME SHOW MORE WEAR FROM AGE THAN OTHERS.
BETTER THAN REPRODUCTIONS!! THEY ARE BUILT BETTER, HAVE THE CORRECT HOLES IN THE RIGHT PLACES, AND FIT CORRECTLY.
PRICES START AT $200.00 + DEPENDING ON MODEL AND EXTRAS. WILL CONSIDER REASONABLE OFFERS
LET ME KNOW WHAT YOU ARE INTERESTED IN.”
If you want to replace your Kayline doors, this might be an option.
https://phoenix.craigslist.org/evl/pts/7550912155.html
“Here is a pair of near perfect Kayline fabric Jeep doors
that were occasionally on my CJ3A. I believe they
will also fit the CJ2A models.
These have the zippered windows and a large pocket
on the inside. Handles inside and outside are included.
They were seldom on my Jeep so are in near perfect
condition, only needing a little cleaning.”
UPDATE: I learned this top was manufactured by a metal worker who manufactured tops for custom tractor trailer companies. He couldn’t find the top he wanted, to he made this one.
I was asked to look at a top located in Oklahoma last night on a Facebook group. It turned out to be one I’d never seen. Anyone ever seen one like this?
This first photo shows multiple unusual accents. First, the rear roof lines are unlike any other top I’ve seen. The rear of the roof looks to be a 90 degree angle, but at the sides, there is a slope that moves towards the front to hug the rounded edges. The roof’s edges look to be sectioned as goes over the edge, rather than round. The hinge-type is different. The existence of a wiper suggests it may have been constructed later than most vintage tops (or added onto the top at a later date). The windows appear appear standard sized, as if reused from a Kelly, Koenig, or Meyer hardtop. The front of the top edges inward towards the front, suggestion it was made for a flat fender.
These doors have been indented in a way that allows for a flat piece of glass or plastic. They also look to be suicide doors, with the handle at the front and hinges in back.
The windshield might be the most unusual aspect. Given its short heigh, I think it might be for a CJ-3B.
Tom shared these Warn Hubs for sale.
https://www.facebook.com/marketplace/item/609748840897390
“Vintage early “waffle” style Jeep summer hubs in original box. Instructions are in awesome shape. Collectible classic set.”
Maybe these parts will interesting someone?
https://maine.craigslist.org/for/d/limington-willys-cj3b-parts/7546650190.html
“Leftovers from my Jeep project
Three frames, two tubs, two transmission, one engine”
UPDATE: Still Available.
(10/02/2022) No description provided.
https://albuquerque.craigslist.org/pts/d/sandia-park-willys-jeep-trench/7533048304.html
“Willy’s Jeep a Trench Attachment
Price is just a place holder.
Open to all reasonable offers
Must pick up”
This is a good price. Seller also has other parts for sale, including a Warn overdrive.
https://sfbay.craigslist.org/eby/pts/7531587974.html
“This set up came from behind a small block Ford 302 289 in a Jeep CJ-5
good 3 speed trans with full syncro first to replace your weaker T-90 in your flat fender CJ-2a 3a 3b MB GPW. 10 spline clutch and pressure plate included (no bell housing)
The trans has an adapter to mate Dana/ Spicer model 18 t-case and comes with a broken case with good gears (incomplete)
I have other parts too for good prices, drive shafts, 5 bolt early ford bellhousing, good complete dana 18, dana 20 pto texas pattern, warn overdrive (OD pricey) Ramsey winch. Muncie and borg warner T-10 if you have cash don’t be afraid to ask.”
UPDATE: **SOLD** Was $400.
Glenn shared this ad. Andy is selling this arctic style hardtop. It includes doors and windshield.
“Willys M38 arctic hardtop kit. All aluminum used to have glass windows but now plexi. Comes with aluminum doors and front windshield more pictures of doors and windshield to come soon thanks for looking”
If this were closer I would snap it up.
https://www.facebook.com/marketplace/item/438725644772144/
“1980 Bellview /warn 6000 · Other_body_style · Driven 100,000 miles Vintage warn/ Bellview 12 volt electric winch.Power in only $150.00 A lot of good cable on this!!”
UPDATE: **SOLD** Was $950.
It’s missing the rear glass, but otherwise looks in good shape.
“Great solid shape
Came off my 1946 willys jeep
Has doors ans roll up windows
All works
Missing rr window and one side window is cracked
I wont bargain on price..”