UPDATE: Was $250. **SOLD**

Here’s a very rare top.  This will be a great find for someone.  The seller does not want to ship.

“I will not ship. They don’t make these anymore. I have a white half cab soft top made by Kayline who went out of business years ago. I purchased this from mefford and hood out of tulare california a few years back and hade it stored ever since. This top only covers half a jeep. So you still actually have a bed to put stuff in when the top is on and zipped up. Windows look brand new and clear. Great for you hunters who use dogs. This way the cab stays warm, due to it being smaller and your smelly wet dogs are in the back, away from you and your cheetos. I have some of the hardware for the top, not sure what all is needed. There is a small box with the instructions and door handles, screws, and other small brackets. Not too sure on all the rods, the doors are correct, the skins just slide over the metal frame and snap into place. The bow and other rods not 100% sure on. Looks to be too many pieces. Any good mechanic / fabricator can figure it out and make a couple pieces if need be. Jeep not included. have more pics of top and parts/bows. Some staining on the top, should be able to clean up with a little elbow grease”

Here’s  a good list of parts.  No pics included.

“- 2 29 tooth 18 transfer cases $150.00 each
– 2 koenig winch drives for 18 cases $100.00 each
– warn overdrive 29 tooth with linkage and shift lever $550.00
– dana 44 rear end offset with 19 spline power lock $200.00
–  buick v-6 225 oddfire runner complete $300
– ford 3-speed tranny with adapter to model 18 case
– 26 tooth transfer case $200”

http://seattle.craigslist.org/oly/pts/1566855369.html

UPDATE: **SOLD** Was $500.

Note that the bottom pic is what it looks like when complete.  It appears the seller doesn’t have all the parts.

“50’s Monroe three point hitch for willys jeep. What you see in the picture is what you get. Price is firm. If this item does not sell on craigslist, it will be going to ebay.”

Here’s a plow.

“Meyer plow set up off my 63 Willy’s Jeep, may fit others. Plow has an electric winch assembly that was working when I removed from my jeep. If you have any questions please feel free to contact me.”

http://syracuse.craigslist.org/pts/1546836452.html

This looks like a good price on a canvas top.  The price on the bows, however, seems a bit high to me, though I haven’t bought bows separate from a top.

“NEW WINTER FULL CAB CANVAS TOP PURCHASED FROM BEACHWOOD CANVAS. MADE TO ACCEPT SIDE CURTAINS, DOOR COVERS (NOT INCLUDED). REAR CURTAIN IS NON REMOVABLE. WILL FIT JEEP/WILLYS/KAISER CJ2A, CJ3A AND CJ3B. OLIVE DRAB IN COLOR. STILL HAS THAT NEW CANVAS SMELL.”

http://losangeles.craigslist.org/sgv/cto/1544442717.html

UPDATE: **SOLD** Were $10 each.

I’m not familiar with the hubs on the left.

“10 spline early Jeep/Willys hubs. $10 per set”

James has this PTO for sale if anyone’s interested.

I believe this is a Dana 25.  This would be a quick and easy way to upgrade to a limited slip in the front, assuming the gear ratio matches what you have.

“Willys Jeep front end with brakes, fits willys jeep cj-5 and M-38, m-38a, 1944-1953 upgraded limited slip upgrade, in very good shape, extra seals for knucles. Local pick up only or pre paid shipping”

http://seattle.craigslist.org/tac/pts/1553554683.html

Here’s a buyer for a snow plow in Montana.

“I have a 1953 CJ-3B that I would like to put a plow on. Doesn’t have to use a winch or be too fancy, just something that I can use to push the snow out of my driveway. I am located out by alberton. Thanks!”

http://montana.craigslist.org/wan/1511928832.html

Here’s a cool knob.

“THIS BRAND NEW HEAVY DUTY COLLECTIBLE GEARSHIFT KNOB FITS MOST DOMESTIC AND IMPORT CARS AND TRUCKS AND COMES WITH INSTALLATION INSTRUCTIONS, 3 ADAPTER SLEEVES, 1 ALLEN WRENCH AND 3 SET SCREWS FOR EASY INSTALLATION. IT MEASURES APPROXIMATELY 2-1/2″ X 2″ (60 mm x 50 mm) , IT WEIGHTS APPROXIMATELY 6 OZ. (180 gr.) AND FITS FOR COLUMN AND FLOOR SHIFT. IT COULD BE USED AS A PAPER WEIGHT, DOOR PULL, DOOR KNOB, REFRIGERATOR KNOB, BEER TAP HANDLE, WALKING CANE HANDLE KNOB AND MANY OTHER DECORATIVE THINGS AROUND YOUR CAR, TRUCK, VAN, SUV, MOTORCYCLE, HOME AND GARDEN. PLEASE EXCUSE THE POOR PICTURE QUALITY. IT IS NOT EASY TO TAKE A PICTURE WITH CRISP DETAILS OF THIS SHINY BEAUTY. OTHER UNIQUE LOGO DESIGNS ARE AVAILABLE IN MY EBAY STORE. PLEASE E-MAIL IF YOU DO NOT FIND THE LOGO OF YOUR CHOICE.”

View all the pics on eBay

“I have a Ramsey winch pto unit 73002, that bolts to the bottom of the transfer case. This is unit is hard to find and necessary if you want both an overdrive and the pto capability on your vehicle. I’m not sure which vehicles this will fit, but I’ve been told that it will bolt onto a Dana 18 and Dana 20. The tooth count is 20 on the main gear. The adaptations of the frame member and shift lever are left up to you. See pictures. Call (503) 554-0631”

http://portland.craigslist.org/yam/pts/1494778542.html

Here’s a good reason to head up to Priest Lake, Idaho.

“Came off a 1959 Willy Jeep. Old school- complete, and works great, with 100ft. of cable. Call between 7am, and 8am. and 5pm and 7pm daily.”

http://spokane.craigslist.org/tls/1490436040.html

UPDATE: **SOLD** Was $500.

Here’s a complete PTO/Winch combo.

“I have a used Koenig PTO Winch, PTO Drive unit that fits Dana 18 Transferecases and all drive shafts and pillow blocks Please call or E-mail with questions.”

This looks like a straight frame with plenty of parts.

“40 s something willys frame , motor , axles , trans/transfer case. All assembled. Motor block cracked. Running gear looks to be good. Sold as is. $300.00 cash”

http://seattle.craigslist.org/sno/cto/1464969811.html

I’m sure someone can use this.

“6′ Snowplow blade and attachments. Manual lift. No winch. Had been previously mounted on our Willys Jeep.”

http://denver.craigslist.org/for/1436206039.html

Brian found this good deal.  Here are Front and Rear Lockers that appear to be still in their boxes.   There’s a review of PowerTrax No Slip Lockers at Rockcrawler.com. 

“#9204302700 powertrax no slip traction lockers. FRONT AND REAR. i bought these for a 1946 willys with original danas, sold it before i could put them in. OVER $800 NEW. WILL FIT MANY MODELS.”

http://columbus.craigslist.org/pts/1404395568.html

Need a PTO?

“Complete Power Take Off unit originally designed for 80″ wheelbase jeeps (CJ2A, CJ3A, and CJ3B). Bolts right up to Spicer/Dana 18 transfer case. Includes shifter assembly, driveshaft, and bumper assembly with safety guard. Also includes homemade extension to install on 81″ wheelbase jeeps like CJ5 and FC-150 (CJ5s from 1955-1971. Rubber boots on driveshaft are in good condition. Data plate says “Spicer Mfg Co. Model 18H Serial 67237″. All parts move free and are in good condition. Located in Upton, MA.  Mark.  cell 603-498-6516.”

http://worcester.craigslist.org/pts/1416944482.html