emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Here’s another of the midwestern or eastern-made fiberglass flat fenders with the wide lip in the back. Listed as a 1953 CJ-3A, the chassis is actually a CJ-5 frame, so not sure where the “1953” comes from.
https://www.facebook.com/marketplace/item/491537236938944
“1953 Willys fiberglass body sitting on newer Cj5 frame, disc brakes,power steering, $1800 obo I will not respond to Is it still available”
UPDATE: **SOLD** Was Make Offer.
Unclear how much value is here.
“Its not a $1 its make an offer. I started at 2K so be realistic. I was planning on making a gpw looking jeep tub on a modern frame. Orange tub is fiberglass and it’s gonna take some time to bond the sides back to the floor, but its fiberglass, hood and fenders are fiberglass too. The metal tub is a 46 has the side cut outs for shovel and ax its rusty and crusty. The clutch pedals and master cylinder and a few other thing are need to xfer over to the glass body. What you see is what you get, I can load it onto your trailer etc. This is all the jeep parts I am selling, if its listed then its still for sale. I am in Fredericksburg Va. 22405”
Here’s another interesting 4-page brochure (my guess would be circa 1958) made for the South African market that I picked up on eBay.
This four page issue notes on page two that June 1956 was “Dent’s out of Fenders” month or, I did you not, “DOOF”!?! I don’t know what to do with that info.
Page three references what may be causing a few DJ-3A noises. One note refers to the “clutch driven disc hub”, which can cause a vibration issues between 33 and 45mph, but I’m not familiar with that part. There are a couple other solutions for particular noises listed.
This newly released Meyers Manx dune buggy is powered by a radial three-cylinder engine with LS DNA. The engine alone sells for $25,000, according to the article.
This could be worth a look.
https://www.facebook.com/marketplace/item/1502404060383648
“1963 Willys CJ3B 4WD Vey nice shape Rebuilt : Steering ( Ford steering box ) Brakes (11″ brakes) Engine Transmission T-case Overdrive Unit Seats Windshield Front and rear axle bearings ansd seals $13,500.00 OBO”
This appears in good shape.
https://www.facebook.com/marketplace/item/844941927583703/
“Just testing the waters, CJ3A Willys in good running and driving condition. 6 volt, all original, lots of new parts. Lights, heater, cigarette lighter, wiper. No turn signals, not required in 1950. Can start with the hand crank, neat party trick. Comes with extra parts accumulated. 6k obo, or trades .Make an offer, all I can say is no. One more day, I’ll probably just keep it, it is a fun ride….”
The price includes the trailer.
https://www.facebook.com/groups/WillysSwapMeet/posts/3778000555806529/
“Super nice everything works. Show winner. Featured in car magazines. Located in Dunwoody GA. Open to trades.”
Price has dropped to $4750.
https://www.facebook.com/marketplace/item/1433672250910047/
“1947 Willis CJ2A will not respond to still available 5700$ runs and drives fun little machine I also have paperwork from when I was purchasing in 1969.”
This does not run.
https://www.facebook.com/groups/730950493727448/posts/2779863378836139/
“FC 170 , non running. Bring a trailer.Dana 44 front & Rear , PTO off transfer case , no trades”
Not sure how much value is here.
https://www.facebook.com/marketplace/item/992728419245333
“1953 cj 3..this has the drive train intact. It ran about 30 years ago.. It will need some work to run now. It has been sitting outside. Body is getting rough. Selling for parts. Asking $495 for it . I can get more pictures if interested. Dropped to 495 the side against the trees was little rougher than expected.”
There are a bunch of jeeps for sale out there. I didn’t have time to post all of them, so here’s a list of links:
This is supposed to run and drive. Blaine spotted it.
https://denver.craigslist.org/pts/d/arvada-1982-dj5-postal-jeep/7771236341.html
“For sale is this 1982 DJ-5 postal jeep built by AM General. it has been in storage for quite a few years. Has a factory, GM, iron duke, four-cylinder engine, automatic transmission. Right hand drive.
Engine runs good, no smoke. Transmission and brakes work. It currently has an electric fuel pump hooked up temporary because the factory fuel pump is not working.
Includes a lot of parts. Extra doors, seats, hood and more.
Hard to find. Most of these were scrapped directly from service.
Clear title
No test drives off of the property.”
This includes a fiberglass front clip.
https://www.facebook.com/marketplace/item/3680761325585716
“1951 Cj3A fiberglass front hood 283 motor does not run title in hand it ran at one time motor&trans not in thanks no trades thanks for looking keep in fowlerville”
Only the one pic provided. The actual plow is extra (not sure if the plow equipment would be removed without the purchase of the plow).
https://www.facebook.com/marketplace/item/867866474785621/
“1948 CJ2A Willys Jeep NY State Inspected & Road Ready $8500 or Best Offer Note- Original Willys manufactured plow is also available for purchase”
This was listed at $400, but probably just a make offer situation now. Thanks to Any for sharing it.
https://www.facebook.com/marketplace/item/1175651470216036
“Jeepster , it’s setting on a late model frame like truck in last picture , the engine came out of truck in last picture , 4cyl turbo diesel 4×4 Jeepster , needs finished everything is there and there is very little work left to do ,make offer , not finishing due to death in family , located in Leighton al , no rust”
Unclear how much value is here.
https://www.facebook.com/commerce/listing/1498304260795865
“Has original engine and trans. Frame appears to be in good shape. Pickup in Hendersonville TN. No title”
The warn winch plus the Beck hardtop (with original data tag) may mean there’s some value here. No title.
https://www.facebook.com/marketplace/item/2618693421667363
“Remember driving it when I was a kid in the pasture I know it needs transmission repaired doesn’t have title as is will trade for a adult fourwheeler no I will not give out my number I’ll answer all your questions on messenger”
These has been available for many weeks. Seems like there could be some value here.
https://www.facebook.com/marketplace/item/7272955299439610
“You get both jeeps 1 to fix up 1 for parts the red 1 was used for my hunting jeep and ran great years ago and has a 9000 pound winch on front. With a little work you could have a great old jeep”
It runs and drives.
https://www.facebook.com/marketplace/item/991474292620296
“46 willys for sale, runs and moves, new brakes and gas tank and rebuilt drives haft. Can’t work on it anymore”
UPDATE: Still Available.
(02/14/2024) Listed as as ’46, it has a 3B body. This Racing-Pusher Jeep has some updates.
https://www.facebook.com/marketplace/item/270443512572903
1946 Jeep Willy Racing/Push Jeep 4 wheel drive Disc brakes Power steering Posi rear end Full floater rear end (Strange) Axils Engine: roller cam, OBEY oil filter, Electronic engnition, anti sway bar Sold as is”
There seems like some good parts here.
https://www.facebook.com/marketplace/item/1674475580046981
“1972 cj 5 jeep Needs rebuilt – 304 A M C v8 has not run in years Indoor storage -Cylinders always lubricated Turns over with battery Rusty Body /Good frame with Surface rust Not rotted out – Has Clutch or transmission issue – – have Transmission Clutch pressure plate Transfer case – front and rear drive shaft for sale in another post pa title in my name please Note SIGNS NOT mine NOT for sale !! I added some pictures – the convertible bows are pictured”
Not sure how much value is here.
https://www.facebook.com/marketplace/item/985857139996767
“1948 willys jeep to restore or parts motor turns over good has both tags but no title”
Here’s another Harney Peak Postcard, but this time in black and white. The seller is currently asking $29.95, but will accept offers.
View all the information on eBay
You don’t see an FJ-6A go this fast very often!