This Jeepster is listed at $13,000 here, but appears to actually be up for auction here: https://www.clasiq.com/auction/1948-willys-overland-jeepster/
1958 CJ-5 Staples, MN $3500
There may be some value here.
https://brainerd.craigslist.org/cto/d/aldrich-1958-willys-jeep-cj5/7556180333.html
“958 Willys Jeep CJ5. Runs and drives. New shocks, tires, seats and all new electrical. Added electric fuel pump but carburetor still could use adjustment to get it to run a bit smoother. I’d love to keep it, but just don’t have the time to tinker with it. Title is in my name. $3500 obo”
1962 M-170 Friday Harbor, WA $13,000
Engine is currently out, but overall this looks in good condition.
https://seattle.craigslist.org/see/cto/7552382998.html
“1962 Willys Jeep M170 Frontline Ambulance. Engine is currently removed for rebuild and partially assembled on engine stand. Jeep is in very good condition with the majority of work done. Easy to finish project. $13,000 obo. Original condition never civilianized. More pics on request. ”
1961 Model? Pittsburgh, PA $5599
No pics.
https://pittsburgh.craigslist.org/for/d/pittsburgh-1961-jeep-willys-jeep-no-rust/7556403142.html
“I HAVE A 1961 Willys Jeep WITH NO RUST AND WAS GARAGE KEPT”
1951 CJ-3A Boise, ID $6500
Runs, but needs work of some kind.
https://boise.craigslist.org/cto/7547125533.html
“1951 Willys Jeep She runs, but she’s a project Jeep. I have new gauges, steering wheel, seats, battery, and tires. It has a hard top also. $6500 OBO”
1953 CJ-3B Hahnville, LA $1000
UPDATE: Pics now available.
iNo pics, but it has a rear PTO. I can’t imagine there isn’t value here.
https://neworleans.craigslist.org/atq/d/new-sarpy-1953-cj3b-willis-jeep/7546929399.html
“Willis Jeep. Have some new parts. All original. F- Head engine. Rear PTO. Text for pics and information”
1950 CJ-3A Caledonia, IL $3500
UPDATE: still Available.
The serial number indicates this is a 1950 CJ-3A. It’s unclear why the title lists it as a 1946. This has a Sears-branded Deluxe hardtop and EasyLok hubs.
https://rockford.craigslist.org/cto/d/caledonia-willys-jeep-1950-cj3a/7551364386.html
“CJ3A – 48114- which by numbers is a 53 yet title says 46. Restore started – frame has been POR, engine was gone through. Body very solid. The tool box top is gone and this is worst corroded part of floor. Has heater and all trans/transfer case are there inside the cab. L 134 engine. Steering box is shot. Tub has a repair to outer panel under passenger door you can see some rivets in the pic. Hardtop is all aluminum the brown material you see is old insulation falling off. Some Floor panels I can Facetime video for a real full inspection.
Possibly delivery/ meet half way. If you have a Jeep/Willys I would consider some trade towards a 65-69 Jeep.
I also can offer possibly delivery or a half way meet up for a reasonable price.
More pictures available on request.
Clean open Kansas title.”
1947 CJ-2A Lake Leelanau, MI **sold**
UPDATE: **SOLD** Was $4500.
Runs, but doesn’t shift into gear.
“If your looking at this add most likely you know a bit about these old jeeps and maybe even a bit about the Bantam trailer that goes with.
The Jeep runs but the transmission won’t go into gear, however it does roll so it’s not stuck in gear. It seems mostly original albeit some repairs done over the last 75 years. It needs attention at every point so it’s a good candidate for a restore I think. I’ve got a green title for it.
The trailer is an old Bantam with some repairs over the last 70+ years, new tires it appears but not title. Can issue a bill of sale if needed.
I’m keen to sell both as a combination but am willing to separate if one desires and the terms are agreeable.
If add is up I’ve got it, I’m wary of scammers.”
2 1947 CJ-2As Franklin Park, PA $3500
Unclear how much value is here.
https://pittsburgh.craigslist.org/cto/d/sewickley-1947-willys-cj-2a/7554511926.html
“Two 1947 Jeep Willy’s
Frame and drivetrain complete on one
Second with body is missing engine parts
Aluminum hardtop available if price is right
Hardtop, rear window, doors”
1947 CJ-2A Malvern, AR $3500
UPDATE: Price dropped to $3500. Tom notes this has an M-38 body.
(10/21/2022) It’s got an f-head and needs brakes.
https://littlerock.craigslist.org/cto/7552121018.html
“Jeep Willys cj2a, approximately 1947, runs smoothly, 4wd, needs brakes. Would make a nice farm vehicle or trail rider.”
Year? CJ-2A Del Rio, TX $4200
UPDATE: Still Available.
(02/27/2021) Pics now provided. Engine is out.
https://dallas.craigslist.org/ftw/for/7552214977.html
“Willys Jeep, CJ2A, L134, 4 Cyl Flathead Engine, all Original, very sturdy, rust in parts but very restorable… I just don’t have the money to finish it… Right now I have the engine out, trying to Rebuild it.. It needs to get on the road again. Asking 4200.00, Jesse”
Year? CJ-5 Nevada City, CA **SOLD**
UPDATE: **SOLD** Was $4500.
Bill spotted this rare CJ-5/Camper for sell. It’s listed as a 1966, but that seems to be an error given the large grille lights, which made their appearance in 1969, as did the camper.
“Super rare jeep camper, original, needs engine and restoration, great project for someone who wants to rebuild and maybe make a tiny home that disconnects from the jeep”
1975 San Juan Scenic Jeep Tours Brochure & Post Card
This 1975 tri-fold brochure from San Juan Scenic Jeep Tours out of Ouray, Colorado, doesn’t show and FC Tour Jeeps, but it does have a wide photo that includes a Wagon Tour Jeep. Below the brochure is the front and back of a Scenic Jeep Tour postcard that features a wagon.
Here is the postcard I mentioned:
Roy Evans Jeep Sign in Bartow, Georgia
A few different people shared this jeep sign highlighting Roy Evan’s connection with the town of Bartow, Georgia. I didn’t know about the sign when we were in Georgia in 2018. We weren’t too far from it on our trip.
Custom Pull Jeepish Toy Troy, OH $400
Roger Martin spotted this custom pull toy, though the build was also planning to add a cooler to it. Maybe someone else has a vision for it?
https://www.facebook.com/marketplace/item/3383456678532607
“Custom made pull wagon. Holds two kids. Hood opens. Was planning to install a cooler in it. $400 obo No trades”
1946 CJ-2A Clarkdale, AZ $13,000
This looks like a very nice build.
https://phoenix.craigslist.org/nph/cto/7549025299.html
“Custom 1946 Willys Jeep. Dana 44 front axle with air locker, Dana 66 rear end with air locker, power steering, automatic, GM 350 blue printed and balanced, front and rear disk brakes, compressor, Warn winch, CB. Comes set up with a tow bar and plug for pulling behind an RV or truck. Comes with soft doors and soft top.”
1947 CJ-2A Monroe, WA $8000
UPDATE: Price dropped to $8000, partly because the trailer will be sold separately.
https://orangecounty.craigslist.org/pts/7550396547.html
“Selling my 1947 cj2a willys jeep
with all its extra parts
(tandem axle trailer sold separately )
All garage kept
Jeep is mechanical restored and daily-driver-able
It has a real wwii mb grille on it but i have the original willys grille and lights for it too.
Also have a dana 44 with 11” drums ready to go in
And a complete extra windshield but with a solid single piece of glass.
Jeep has 12v conversion, pertronix ignition, and disc brakes in front.
Otherwise it is totally stock.
Engine was previously rebuild and has great compression.
Steering, transmission, transfer case axles all in great shape.
Body is original with original dents and tool box floor rust.
Just did a mechanical restoration. I like it looking rugged.
Has almost new 7.50-16s
Trailer is a 7000 lb rated dual axle with electric brakes wood deck and new tires. Trailer is only about 3 years old.
Hauls this jeep beautifully
Located in Seattle
Seriously buyers only
Price is obo
1954 CJ-3B Phoenix, AZ $7200
UPDATE: Price dropped to $7200.
(02/20/2022) This fiberglass body may be the 3B Bobcat version. It’s got the wide brim in the back and the long steps. But, it is difficult to tell for sure.
https://phoenix.craigslist.org/cph/pts/7547239042.html
“1954 willys jeep. 351 Ford
C4 automatic transmission
Power steering
Lockers
Dana 44s
Air conditioning
Fiberglass tub
Asking ninety 5 hundred”
1948 CJ-2A Great Falls, MT $7999
UPDATE: Still Available.
(10//02/2022) Appears in reasonable shape.
https://greatfalls.craigslist.org/cto/7549444207.html
“Rebuilt engine, re-arched springs, frame powder coated, new brakes and shocks, new top, paint. Restored to be usable, not a show rig.”
1948 CJ-2A Falcon, CO $5900
It could use some brake work, but they do work.
https://cosprings.craigslist.org/cto/7555990392.html
“Runs and stops, starts up right away, sounds just like a MASH Jeep. Four wheel drive and low work. 3 speed manual.
Recent: Brake system rebuild; battery; tires ($400each)
Leaks: Its a Jeep”
1946 CJ-2A Gladstone, OR $5500
This jeep has seen some action, but is still going.
https://www.facebook.com/marketplace/item/1188600775084203
“1946 WILLYS Cj2a .Would only let me put wrangler in heading . I have Owned for 6 years . .It runs and drives and stops .Has Original Flathead Engine that runs good Does not smoke and holds good oil pressure .Has some oil leaks . I Rebuilt the trans and transfer case . Has new clutch . Rebuilt drivelines . New Springs shocks and shackles .New tires New Exhaust. E brake even works .Pretty original other than converted to 12 volt . Permanent restored 1946 Oregon Plate . Clear Title in my name . Rough Body but very little rust Mainly under tool box See Pictures . Great Rat rod or restoration project . I have $4500 in just parts receipts . Windshield Folds down and tips out I WILL NOT RESPOND TO IS THIS STILL AVALABLE !! Willys . Jeep .Five 03 – 8One nine-5440”
Various Jeep Grilles Middletown, CT $200 and up
Gary is selling a variety of grilles. You can reach him at gkeating1 @ comcast.net (remove spaces around the @).
“I HAVE SEVERAL ORIGINAL TAKEOFF/USED WILLYS AND AMC JEEP CJ2A,CJ3A,M38,CJ3B,CJ5/CJ6 GRILLS.
THEY ARE ALL HANGING IN MY GARAGE AND HAVE BEEN FOR YEARS.
MOST ALL HAVE EXTRAS SUCH AS SOME LIGHTS, WIRING, TRIM RINGS, ETC, AND ALL ARE VERY USEABLE AND FIXABLE. SOME SHOW MORE WEAR FROM AGE THAN OTHERS.
BETTER THAN REPRODUCTIONS!! THEY ARE BUILT BETTER, HAVE THE CORRECT HOLES IN THE RIGHT PLACES, AND FIT CORRECTLY.
PRICES START AT $200.00 + DEPENDING ON MODEL AND EXTRAS. WILL CONSIDER REASONABLE OFFERS
LET ME KNOW WHAT YOU ARE INTERESTED IN.”
Kayline 2A/3A doors Scottsdale, AZ $75
If you want to replace your Kayline doors, this might be an option.
https://phoenix.craigslist.org/evl/pts/7550912155.html
“Here is a pair of near perfect Kayline fabric Jeep doors
that were occasionally on my CJ3A. I believe they
will also fit the CJ2A models.
These have the zippered windows and a large pocket
on the inside. Handles inside and outside are included.
They were seldom on my Jeep so are in near perfect
condition, only needing a little cleaning.”
1948 CJ-2A Ovando, MT **SOLD**
UPDATE: **SOLD** Was $1500.
(02/01/2022) Listed as a 1949, the serial number for the chassis is near the end of the 1948 production run. This lacks an engine. The hardtop does appear custom.
“1948 Willys CJ2A Jeep. $2000/obo. Sincere, old Montana jeep, surprisingly rust-free body, some bondo. No motor. Title (Helena, 1971); title says 1949 but I was informed the serial number is 1948 production. Unique, custom, well-built, steel full cab, therefore no original windshield frame or tailgate. Floors minor rust-out, bed very solid and straight, toolbox replaced. Some metal sheeting tacked on exterior of body. Original radiator and toolbox lid included. 16” rims, tires have air but need replaced”
Cutlas Bulldog(?) Hubs Wickenburg, AZ $125
UPDATE: Still Available.
(10/02/022) These hubs look similar to Cutlas Bulldog hubs, but the design of the mid-section sides just below the “knob” is shaped slightly different (larger side scallops) than the image on the Bulldog brochure. Given the two section design, I will guess that these were a transition hub from the Cutlas Model 100-2 conical design to the later Bulldog hub design? Anyone have insights on these? I don’t have a brochure for these.
https://phoenix.craigslist.org/wvl/pts/7555714076.html
“Cutlas lock hubs, 10 spline for old jeeps and scouts. May trade for ammunition or towards firearms. No reloads!”
Bulldog example:
Here is another example in my archives. I also labeled these, perhaps incorrectly, “Bulldog” hubs:
I just discovered this set of Cutlas hubs for Chevys on eBay. They look like Bulldog hubs, but have no scallops at all along the mid section’s side: