To Top

1959 CJ-3B Stagecoach, Nv **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: Was $2500. **SOLD**

There have been some mods, but otherwise this looks in pretty decent shape.

“hi and low rear end has a chevy V8 runs good newer soft top in great shape. have clear title. open to all offers and trades $2500obo If interested, I can email/send pictures.”

 
To Top

GPW Bellhousing Horseshoe Bend, Id $50

• CATEGORIES: GPW (Ford MB), MB This site contains affiliate links for which I may be compensated.

This is right over the hill from me.  I really don’t know how rare these are, but I could run and pick it up if someone’s interested in it.

“Hard to find single rib Willys bell housing for 4 Cylinder L-Head (CJ2A, MB, GPW Jeep). I removed this from my GPW. It’s in good shape with no cracks. It will bolt up to a T90 and T84 transmission. It’s for the CJ2A jeep or early flat fenders. It includes the original inspection cover. Somebody drilled another drain hole in the bottom (see photo).”

http://boise.craigslist.org/pts/899733812.html

 
To Top

1977 Russian UAZ 469-B San Diego, CA **SOLD**

• CATEGORIES: Features, Unusual This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

For that 4×4 collector that has almost everything?

“You are bidding on a very hard to find 1977 UAZ 469-B, 4X4, Ex- Russian Military Jeep VIN# 203815. The 2.5 L gasoline motor with only 40,000 KM runs very good. It has a 4-speed manual transmission with a high, neutral and low range transfer case. These trucks are rugged and simple 4X4’s, very popular in the Eastern Europe, Middle East and Africa.”

 
To Top

1954 CJ-3B Salinas, CA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: Was on eBay. **SOLD**

“UP FOR BIDS IS A NICE AND CLEAN 1954 WILLYS WITH A FORD 289 V8 AND AUTOMATIC TRANNY.IT HAS FULL ROLLBARS AND SEAT BELTS FRONT AND REAR.SITS ON TSL SUPER SWAMPERS AND ALUMINUM WHEELS.LIFTED 2 INCHES .IT HAS DANA 18 T CASE AND DANA DIFFERENTIAL WITH DETROIT LOCKERS.THE TIRES HAS APPROX 100 MILES.IT HAS B AND M SHIFTER.IT IS PAINTED TURQOISE AND PASTEL GRAY EXTERIOR AND INTERIOR WITH THE EXCEPTION OF THE GAS TANK BEING PINK.”

 
To Top

1951 CJ-3A Glenwood Springs, CO **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1950.

“1951 CJ3A, original 4 cyl, runs,good shape,hat bars are sound,but body and floor not perfect, new seats, 12 volt converted, includes extras, overdrive (needs rebuilt), large box of spare parts”

 

 
To Top

1966 CJ-5 Federal Way, Wa $1250 obo

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

Yeah, it appears there’s some rust.  But, if it runs well, this may be a good find for someone.

“4-wheelin’ Rock ‘n’ Roll. Large V-6, 4 wheel drive. Mag wheels, roll bars, tow bar. *$1250 or Best Offer! Please call: 253-310-3823”

http://seattle.craigslist.org/skc/cto/896003229.html

 
To Top

1976 CJ-6 Pendleton, OR **SOLD**

• CATEGORIES: CJ-6 This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was priced at $2500.

“I am selling my 76 CJ 6. Runs great 258, t-3, Dana 44 rear, Power Steer. Lots of new parts, clean OR title, new tune up. Hard top, hard doors. Not abused, straight frame, some rust 2500.00”

 
To Top

1965 CJ-3B Lyons, Or **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

This appears to be a great deal on a late model CJ-3B.

“**SOLD**

 
To Top

1942 GPW Parts Portland, Or

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

This seller is parting out a 1942 GPW frame for $50 (though the pictures show the axles, they are no longer there).  Separately, he’s also selling the engine $150 and the tranny/tc $250.  If you are collecting GPW parts, this might be worth checking out.  It sounds the seller is looking to get this out of the drive way.

The Frame Ad:
“1942 Willys GPW frame for sale. Need to sell to get it out of my yard. Would rather have it go to a jeep lover than the scrap guy. $50 bucks and it is all yours. The engine, transmission and axles are NOT included just the frame (sorry old pictures they are not attached now). Get back to me to set up a time to see it.”

The Engine Ad:
“Engine block from 1942 Ford GPW with the bell housing all original and ready to sell at $150. It needs a Willys jeep lover to work on it but will be worth it. Come by and take a look.”

The Tranny/TC Ad:
“Willys 1942 GPW transmission shifts smoothly all original, this needs a good home not my garage. Come on by and take a look then take it home. $250 and it is yours. Original Willy’s rebuilt ones cost $750 and up, the case alone is $200 for a reproduction one. Get back to me to set up a time to see it.”

 
To Top

Aluminum Wheels from CJ-7 Longview, WA **SOLD**

• CATEGORIES: Tires and Rims This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Were $150.

These are a reasonable price.  I haven’t seen many of this style for sale.

“These are a set of wheels that came on a CJ-7 that I recently purchased. I used some other wheels, so I no longer need these. They are aluminum, they are a 15 inch diameter rim by 8 inches wide with 4 inch backspacing. These are a 5 lug by 5.50 pattern. That means they will bolt on a Jeep CJ or willys, Ford F150 trucks and Ford Bronco. They come with chrome center caps. There is nothing defective or wrong with the wheels, a little soap and water would do wonders. If you have any questions, please e-mail me and I will get right back to you. Thanks for looking and have a nice day.”

 
To Top

Sand Flat Fender Jeep Tualatin, Or $3000

• CATEGORIES: CJ-2A, Racing • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:  The price has dropped to $3000 (but only for this weekend — Nov 1st & 2nd 2008).

This CJ-2A sand jeep sports the very rare parkette fiberglass body.  Only a handful of these bodies were made (At one time I was told only about 10 of them).  It sounds like it has some good parts, but it will take some work to convert it to 4wd.

“1941 cj2a military jeep that has a a full fiberglass body so you dont have to worry about rust or dents on this 67 year old jeep! it has a stout good running 350 small block with a 700r transmission. the tread on the tires are very good and i would say have conservitivly 85% of their life left. i just put a brand new radiator on it with all new verrry expensive rad. hosing which is actually 150psi petroleum trasfer tubing so it will never break or pop from heat. 971-645-1635”

http://portland.craigslist.org/wsc/cto/898162709.html

 
To Top

1952 CJ-3A Arcata, CA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2500.

It’s stock, but it comes with some body rust.

“1952 Willys Jeep CJ3A. Runs and Drives. Completely Stock. Lock-in/ Lock-Out Front Hubs, Original Heater, New fuel pump, tank, minor tune. Factory Hardtop with Doors can be included. Clean Title with current CA tags.”

 
To Top

1951 CJ-3A Beluah, Michigan $700

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics to show the condition.  Probably not good based on the seller’s description.

“not running needs total restoration all there has rare hardtop hard doors with role down windows call jeff days 231-882-9636 after 5pm 231-882-0636”

http://nmi.craigslist.org/cto/896097101.html

 
To Top

Brian’s Military Jeeps has moved to WWIIJeepParts.com

• CATEGORIES: Features, Website This site contains affiliate links for which I may be compensated.

Brian’s Mililtary Jeeps website can now be found at http://www.wwiijeepparts.com/.  If you haven’t visited the site, you really should.  Brian has a wealth of information and details throughout the site.  For example,’What is Cosmoline?‘ is a question I never thought to ask, because I’d never heard of it; However, Brian not only knows to ask, but also has a ready answer! Below is Brian’s description of his website.

“The WWII Military Jeep Website – Dedicated to restoring WWII Jeeps – the MB, GPW – mfg. by Willys & Ford from 1941 – 1945, and outfitting them with proper parts, accessories, accouterments and militaria. MB/GPW, Slat Grill, “F” Script and other Rare Parts For Sale & Trade. “

 
To Top

1954 M-170 Tuscon, Az **SOLD**

• CATEGORIES: M-170 This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $3800

“Highly collectible willys jeep. Production started in 1954 :500 units of this particular jeep were made that year. During the life span of 1954 – 1964 only 6,500 units were produced. This could be the top 50 left for that year in such good condition body wise. Has original parts, even the tires!!! Items needing to be fixed:
Engine is Honeyed and will need a clean-out. Brakes will also need to be placed on the jeep. Will need seats.
We haven’t had time to restore the Jeep and would like for someone else to take over the project. “

 
To Top

1948 Sand Racer Myrtle Creek, OR **SOLD**

• CATEGORIES: CJ-2A, CJ-3A, Racing • TAGS: , This site contains affiliate links for which I may be compensated.

Updated:  **SOLD** Was $4500.

“48 willys, for race or play, wont take much to turn into play mode. Has 325hp 289ford, tci streetfighter c4 tranny, 3000 stahl conv. dana 44 rear full floater and dutchman axles. Douglas wheels, 16.50 paddles. Custom frontend with spindles. Jeep weighs 2200 pds. This is a very consistent sportsman racer with lots of wins, call for details. I have owned for 12yrs looking for someone to take care of and have as much fun as I have, serious inquiries only please. Comes with extra seat for passenger, tranny, converter and parts.”

 
To Top

My Build — Additional Wiring

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

Over the weekend I completed the wiring along the engine.  I wanted to hide the wires as much as possible, keep them as organized as possible, and not connect them to the fenders.  Below are pictures of the lines run from the alternator, from the fan assembly (the wiring runs from the fan, over the radiator, and down along the grille to meet with the front light wiring) and then the wiring from the grille along the frame to the cowl.

This is the dual fan setup I purchased from North Coast Peformance, an eBay Power Seller.  I fiberglassed the two fans together and built a metal frame to surround them and attach them to the radiator framework.  This setup included a thermostat that slides snuggly inbetween the radiator fins.  These two 10″ fans cover almost the entire radiator, making it a tight fit.  However, between the aluminum radiator and the fans, I should have no overheating problems.

Continue reading

 
To Top

1953 CJ-3B La Grande, OR **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5250.

On my way to look at the jeep in Wallowa, I spotted this jeep just outside of La Grande, Or.  Apparently, it is all stock except for the tires, top and brakes.   However, I noticed that the front bumper has been chopped to the width of the frame, so I suspect there might be a few other minor changes as well.

I’ve included several pics below (it was behind a fence, so my image options were limited).

Continue reading

 
To Top

My Build — Vacuum Hoses

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

Because the engine I had wasn’t entirely complete, I was unsure how I should run the vacuum lines.  Last time I ran my vacuum lines, I’m pretty sure I guessed — Or, maybe I asked dad.  This time, I consulted google and learned a little bit more about vacuum lines.

First, there seems to be plenty of confusion about whether vacuum lines should run from the intake manifold or from the ports below the carb.  As I understand it, the vacuum from the intake manifold is a little more consistent at or near idle.  However, most stock applications will operate fine from the ports below the carb. Here’s some information about vacuum that I used.  I found some additional explanations, but I seem to have misplaced the links.

The high rise manifold I am using only has one vacuum outlet, so I chose to use that for my powerbrake hose (which I will obviously need to lengthen).  I used the port behind the carb to hook to the th350 governor on the back of the transmission.  I blocked the large port on the front of the carb.  Finally, I hooked the small port on the carb to the distributor.  I figured these were low risk decisions, as all of these are easy to change if I need to make a change.

I didn’t invest a ton of time doing research on this, so if anyone has any other suggestions or info, please add a comment.

Continue reading

 
To Top

My Build — The Front Driveline Clearance

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

One issue I’ve put off for a while is the close clearance between the front driveline and the transmission.  Because the TH-350 is so much wider than the standard tranny, the driveline runs very close to the transmission pan. Unfortunately, some of the pics didn’t turn out great, but here’s a few of them.

To improve the clearance, I used a torch to heat up the pan and dent it.  That went well, until I tried to put the pan back onto the tranny.  It turns that a casted piece was now bumping against the pan slightly, keeping the pan from going on correctly.

To fix that problem, I wrapped the transmission in plastic and cut a little hole so the cast piece was sticking out.  The plastic would keep any grinding pieces out of the tranny.  Then I grabbed my grinder and ground down the part.

This worked surprisingly well (meaning nothing went horribly wrong).  The piece ground easily.  The pan fit nicely.  My clearance improved. So,  I sanded and painted the pan and put it back together.  I’ll add an additional pic showing the clearance once I improve the light so it shows up better.

Continue reading

 
To Top

Four Wheeling Plus in Ellensburg, Wa

• CATEGORIES: Features, News This site contains affiliate links for which I may be compensated.

Four Wheeling Plus owner Ron Dunn Jr. is moving his shop to a smaller location, so he says he has some great deals on a variety of products.  You can learn more from the PNW4WDA website or go to his website.

“Yes I am selling my shop but NO I am not going out of business. I am selling my 6000 square foot shop that is pretty much out in the middle of nowhere and I hope to buy/lease a smaller building in town where I will get more foot and drive up traffic.”

 
To Top

Race Jeep Rochester, Wa **SOLD**

• CATEGORIES: CJ-2A, CJ-3A, Racing • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  *SOLD*

This appears to be a parkette racing body.  The front of the frame looks a little twisted.

“Race Jeep for sale. $2000 OBO–This is a great jeep & a great buy… This jeep has no engine, but all running gear included and this is a great addition to any racing team. This is set up for a Buick V6 231 with a 4 speed. It has 44 axels with 538 gears and a good transfer case. We are also including 3 spare Desert Dog tires with wheels in this great price. Please email me at courbail@hotmail.com with your information. .”

 
To Top

Weekend Updates

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

I was so busy this weekend with my jeep that I delayed my weekend updates until last night.  Unfortunately, just as Poseidon toyed with Ulysses, my web provider appears to enjoy toying with me at times, making access to the site nearly impossible last night.  So, I’ll being provided updates throughout the day today.

1.  The first update is that I’ll be heading north to Seattle tomorrow for a few days.  In the morning I’ll be stopping by Wallowa, Oregon to take a closer look at this old racer.  Then I’ll be swinging by Tigard, Oregon, to pick up the rims Mitch purchased.

2.  Brian sent me some updated pictures on his project, so I’ll be filling in readers on his progress.  He’s taking the entire week off as he’s busy with his dogs all week.

3.  I need to provide updates on my project — I was very busy this weekend completing a variety of finishing touches.

4.  Of course, I need to update the site with the latest jeeps for sale.

But, before I do that, I’m off to play some basketball.  So, stay tuned.

– Dave

 
To Top

1942 MB Vashon Island, Wa $1700

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

It isn’t clear to me whether this runs or not.

“1942 Willies Military (Navy) Jeep complete with most original hardware. $1,700 includes extra engine. Ready for restoration.”

http://seattle.craigslist.org/see/cto/891903388.html

 
To Top

1966 CJ-5 Washougal, Wa $2600

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

This CJ-5 has got some great extras for jeeping, including posi front and rear, full cage, dual tanks and more.

“CJ 5 Jeep 1966. 4 speed, Chev. sm. blk. 4-sp./ 4 barrell carb. Full roll cage, bimini top. Bucket seats. Tilt wheel, stereo. Possi- front and rear. After market wheels. Headers. Call 503-740-7396 or 360-835-5467”

http://portland.craigslist.org/clk/cto/892377435.html