Will need some brake work. It likely has an f-head.
https://www.facebook.com/marketplace/item/278392333348542/
“1952 Willy’s Jeep. not a military vehicle. Has a 1962 motor. Runs great, but uses a little oil and the brakes aren’t super great.”
Will need some brake work. It likely has an f-head.
https://www.facebook.com/marketplace/item/278392333348542/
“1952 Willy’s Jeep. not a military vehicle. Has a 1962 motor. Runs great, but uses a little oil and the brakes aren’t super great.”
Not sure how much value is here.
https://www.facebook.com/marketplace/item/2680099778939849/
“1940s Willy DJ3A 2wd dispatcher Jeep. Has engine and transmission. Has column shifter but not hooked up. Body has obvious rust and not currently running.”
This has a few DJ-3A parts on it. Given the column shift, this could have been a convertible. It’s still 2WD.
https://www.facebook.com/marketplace/item/544927796452107/
“1958 Willy’s jeep with a 283 bored 40 over with small cam aluminum intake Holley 600 Vac carb 350 turbo transmission 8inch ford with mini spool 50miles on new motor 2 wheel drive title in hand”
This militarized 2A has a few mods.
https://www.facebook.com/marketplace/item/2930693780354724/
“Runs good. Looks great. 12v conversion.”
UPDATE: **SOLD** Was No Price.
Seller has the truck (listed as a ’65) pictured below for sale and a traveller.
“also have a 1964 willys jeep traveler for sale ( it has the barn doors in back ) for $2000 very rare also has 302 v8 with bell housing trans. and transfer case. not looking to sell parts want to sell complete units. thank you for looking have title for all. the last picture is of my 65 jeep truck. runs drives registered title in my name 383 stroker 400 turbo ect.ect. hot rod not for the faint of heart. bare bones rat rod $10,000 SELLING COMPLETE VEHICLES FOR PARTS OR WHAT NOT it is up to you have titles for them. I don’t speak or read Spanish. any e-mail in Spanish will be deleted. than you! not wanting to I am also putting my 1967 Plymouth wagon for sale $1000 as is or I can get it running and sell it for two times that”
This is a 1950 CJ-3A body grafted to a 2010 Ford Ranger.
https://www.facebook.com/marketplace/item/238527360590791/
“1950 Willys Jeep body cut and modified to fit the frame and motor of a 2010 Ford Ranger. It has the motor and tires from the Ranger, 28,000 miles on it”
UPDATE: Still Available.
(04/25/2019) Includes a rear PTO.
https://www.facebook.com/marketplace/item/206295774005521/
“1950 Willys Jeep CJ3 with Surrey Top. All new steel body, fenders, hood & cowl. Has right side spare tire mount, all new yellow paint, 5 new non-directional tires. New Sunbrella top and seat covers that snap out. It has undergone a complete ground-up restoration and features rear power takeoff. It is powered by a 134ci 4-cylinder engine with a 3-speed manual transmission. Everything is new or re-built with less than 100 miles since the re-build. Clear Massachusetts title 1950 Jeep CJ3A. $18,500. or best offer. Located in Shrewsbury, MA.”
UPDATE: Still Available.
Not sure how much value is here.
https://www.facebook.com/marketplace/item/136584791098012/
“only one with no title no engine 4sp and transfercase in it”
UPDATE: Still Available.
(01/01/2020) No title. New tub. It’s a project.
https://www.facebook.com/marketplace/item/2174762322820275/
“Jeep Willys, New Tub Spotless No Rust, All Parts To Complete Come With It, Bought it as a project and It’s Just Been Sitting In The Shop For About 5-6 years, Unfortunately I Do Not Have The Title For It $5000 obo”
Runs and drives.
https://www.facebook.com/marketplace/item/691181091659921/
“1948 Jeep Willy’s selling for my grandpa. Runs and drives all the lights and gauges work I believe. Has a huge 10,000lb winch mounted in the back that works. Has the soft doors to go with it, Clean title in hand, located in Virginia, MN asking $4000”
This 48 page VEEPSTER Builders Guide & Assembly Manual was listed on eBay the other day. It’s a detailed document on how to build a VEEPSTER with the kit supplied by Sun Valley Autotech. There’s no date on it. Learn more about VEEPS, Scamps, VEEPSTERs and eVEEPSTERs here.
UPDATE: This is an a rewrite of a couple different brochures to document the snow plow and scraper relationship between the Glenn M. Rogers Company, the Morrison Railway Supply Company, and the Newgren Company.
I believe Morrison manufactured the Snowplow and Scraper based on a Rogers design and the completed item was marketed through the Newgren Company. As I’m no expert on these plows, or the relationship between these companies, this is all conjecture based on the brochures.
Here are several different brochures through the years and a couple Sno-Dozer data plates at the very bottom. This first brochure shows the Glenn M. Rogers company marketing the snow plow. This 1948 brochure does not mention the Morrison company.
In this brochure, also from 1948, it appears Newgren is offering a Roger’s plow setup that’s been combined with Monroe hydraulics (with three different hydraulic options no less).
There’s no date on this brochure, but in it Morrison is now credited with the manufacturing of the Rogers design, with Newgren still marketing the package. There’s no mention of the hydraulic options. I am leaning towards this being a circa 1949 – 1951 brochure. This brochure may have introduced the “Sno-Dozer” brand name.
This ad appeared in the June or July 1952 issue of Country Gentleman.
Looks in good shape.
https://www.facebook.com/marketplace/item/2886376368067956/
“1981 VWVeep CJ3 Jeep with 1600 cc VW motor Runs Great”
If I understand correctly, it’s a diesel that’s been converted to running oil? Or, it includes a kit to make that possible?
https://www.facebook.com/marketplace/item/280790956427340/
“jeep season, need to sell my cj10 $ 5000 wt oil conversion, run for free”
Looks solid. The front frame rails have been rebuilt. It may have Husky or Allstate hubs.
https://www.facebook.com/marketplace/item/280253749780084/
“Completely rebuilt. Many new parts. New tires.”
Listed as a DRW, it looks more like an FC-170 with dually adapters. Yet, it does have the correct DRW speedometer.
https://www.facebook.com/marketplace/item/816402585551224/
“For sale 1960 FC 170 DRW. I bought this just the way it is. I got the 226 Super Hurricane unsiezed and I am starting the restoration. It has the add-a-wheel type dually setup that allows the same wheels to be used all around. This includes a clear TN title, and extra frame with an automatic transmission and transfer case.
The price will go up as more of it gets completed. I am updating my ad to show the progress to this point. I have all new gaskets for engine, hoses and belts, fuel tank with sending unit and line for the fuel and brakes, mounts for the engine and transfer case.
I ordered a windshield which should be here in a couple of weeks. I’ve got the engine cleaned up, painted and moving freely. I also cleaned up and painted some of the frame.”
UPDATE: **SOLD** Was $18,500.
(05/25/2019) Looks like a clean build. Note the windshield setup; looks well done.
“1948 Willys Jeep CJ2A
V6 225 odd fire
Everything rebuilt less than 2000 miles
Custom Top, Tow Bar, Chrome Rims, Goodyear, Racing Seats, 4 point harness”
UPDATE: Still Available.
(04/24/2020) Seller listed this as a “pre-1954 Kaiser Willys”, but I’d say it’s more likely a mid-to-late 1960s CJ-6.
https://www.facebook.com/marketplace/item/2641692526152725/
“Posting a Pre 1954 Kaiser Willys Jeep for a friend. It has the 20” stretched wheelbase. All original 4 cylinder Hurricane engine and transmission. Everything works including lights etc. rebuilt front hubs. New fuel pump. New alternator. New starter. Message if you have any questions, or Text [hidden information] before 6pm.”
UPDATE: Still Available.
(08/07/2018) Entry sides have been altered.
https://sacramento.craigslist.org/cto/d/orangevale-1948-willys-cj2a/7137622024.html
“1948 Willys CJ2a, total restoration (frame off). Every mechanical and electric system is new or rebuilt: steering, suspension, brakes, fuel, cooling and drive train. It has not been registered and used since the restoration was completed. The only conversion from original equipment is a dual reservoir master cylinder and dry element air filter. Please call with questions, but do not make an offer without looking at it. Clean title in hand. ”
UPDATE: **SOLD** Was $15,000.
Daniel shared this nice looking FC.
“This is a very nice 1965 jeep FC 170. It has had some minor rust repair and although it is not a professional paint job, looks good and is a great driver. The odometer reads 49,400 miles which I believe to be correct. It has its original six cylinder engine with the original transmission and transfer case. Mechanically, it is in good condition and starts, stops, and drives as it should.
Like the April issue, this issue includes a variety FC and Surrey images.
The March 1956 Issue of Popular Science included a small story of a CJ-2A with a Gutter-Vac installed. It was used in Washington, D.C.
UPDATE: Thanks to Mark we have some background information on the Turner Manufacturing Company: https://www.statesville.com/opinion/o-c-stonestreet-a-closer-look-at-mr-c-h-turner-and-turner-manufacturing-company/article_d376cc29-de76-591c-bcad-62e719909ca6.html.
I’ve also added to the post with some wood working equipment that was also offered by the Turner Manufacturing Company of Statesville, North Carolina.
The Turner company offered a variety of other wood options as well according to the Special Equipment brochure index:
As the original post indicated, Turner produced hay balers as well.
This turner hay baler has some similar elements, but isn’t example the same:
This is really cool … expensive, but cool. Thanks to Steve for sharing it with us.
View all the information on eBay
“This listing is for one Vintage EL JEBEL JEEP PATROL Denver Colorado License Plate Topper Attachment. It is in very good condition with original paint.”