emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Nice looking lefty.
https://www.facebook.com/marketplace/item/186965714369423
“48 cj2a. Fresh engine, Working on another and is being neglected. $10,000, Central Montana. Don’t enjoy tumb talk much so 406 590 5060 please if serious only. Thanks Bob. If you see this it is available. Please don’t ask.”
This is listed on eBay. It appears to have Watson Hubs. Note the slats on the hood.
View all the information on eBay
“1954 Willys Jeep Brush
drive well
good paint
engine just had a head job”
UPDATE: Price dropped to $10,500.
Rare to see a Monroe 3pt in our region.
https://www.facebook.com/commerce/listing/1458035655062799
“CJ2a with Monroe hydraulic 3 point hitch.
Rear pto gearbox.
All new wiring and brakes.
Runs and drives great.
Clean Washington title in my name.”
Blaine shared this CJ-5, noting the hardtop looked unusual, which the rear of it does. After some research, I felt it is a Koenig Jiffy Cab 520 for the CJ-5 (see an Aug 1957 brochure here). This is the first time I’d noticed that the Jiffy Cab 520 had an unusually wide rear door with slim sides (not room for side windows in the back).
https://oregoncoast.craigslist.org/bar/d/gardiner-1970-kaiser-jeep/7683729409.html
“
“The jeep is pretty-much untouched and original (except for the paint). Last year before AMC bought Jeep. It has the factory 3.7l Dauntless V6 motor, three-speed transmission and factory PTO winch. Split bench seat.
The motor is strong with as-new oil pressure. A prior owner put a 3.8l intake on it so it can use the Delco electronic ignition. Dual exhaust, as new. Transmission good as are the brakes. I hate antique cooling systems, so a new radiator and heater core. Headlight replacements should be in today (3rd), LEDs with glass faces.
The paint job was for protection since it came to the coast, mediocre base coat, clear coat. The hard top was bought when the Jeep was new. Neither roof or the body show rust, it came from Talent, very dry country. It has a mis-matched tire, and needs little jobs for it to be the daily driver.
This is an old Jeep, old school. No power steering, just a big steering wheel. No power brakes or cruise control. Early Jeeps are strong and reliable, but have little in common with modern Jeeps.
I am willing to consider trades, even non-vehicle, if the trade seems right, or $6k. I have varied interests.”
UPDATE: Still Available.
(04/10/2023) John shared this early CJ-2A. It’s had a few updates, but the indents and column shift are still there. There has been some body work (such as the elimination of the spare tire carrier mounting holes), along with new paint. If the underside on this is solid, it may well be worth a look at this price. I don’t impinge it would take too much to bring this back to stock.
http://northwestclassicautomall.com/classifiedads.html?cid=1&step=4&pid=11278
“1945 Willys Jeep CJ-2A
All original except back bumper and top.
Original miles 45,640.
VIN# 10335.
Has all 5 tags.
6 Volt.
Column shift.
Runs great.
Have owned for 23 years.”
Starting bid is $800. Seems like some value here. No bid with 3 days to go as of this post. Thanks to Bill for sharing this. No description provided.
View all the information on eBay
The engine is supposed to run. Thanks to Roger Martin for sharing.
https://www.facebook.com/marketplace/item/3185059278463049
“Dj5 mail jeep. Has a title! Bought it to v8 swap it. But don’t have the time to do so. Motor ran off a boat tank recently and the jeep was driven around in a feild. It’s right hand drive. Automatic. Pretty neat little piece. There’s some bucket seats that come with it. Other than that what you see is what you get”
This was listed at $4800, but that price has been crossed out. Perhaps the seller is taking offers? The front suspension setup is unusual. It appears a bump stop has been added to the rear of the springs, replacing the shackles. It also looks like some kind of block or wedge sits between the springs and the axle.
https://www.facebook.com/marketplace/item/768304708324018/
“Complete frame up restoration project that is very close to being finished. It came from California and is extremely solid. It was taken down to bare metal and there was not a spot of rust anywhere. A skim coat, block, primer, block seal, and painted gray. It’s a 46 CJ2A with CJ5 running gear that has overdrive so it will have no trouble running the freeway. Has a chevy 350. Lot’s of new parts. Part’s alone cost more than the asking price. I have the windshield frame and windshield for it. its painted black. I will not respond to is this still available. Located in napavine Washington. Cash only sale, no trades. First person here with cash takes it home. Change of plans…..I’ll part it out. Let me know what you need. It has a really nice suspension setup. I think I’ll keep the 350 SBC that’s in it for another project.”
This appears to be a CJ-5 hardtop.
https://www.facebook.com/marketplace/item/203148599459876
“Koenig hard top for jeep”
If a Crosley, which the grille indicates it might be, I’m unsure the model. Usually, these have some type of hood-bump and different style fenders, but the hood on this is flat, as are the fenders.
https://www.facebook.com/marketplace/item/1016724232951449/
“Crosley Jeep Project. $350”
John shared this CJ-2A. It’s got some mods and is a bit rough in places.
https://www.facebook.com/marketplace/item/370743031962644
“Selling my 1946 cj2a. Hate to sell it but I got another one which is as good as I ever hoped for this one to be. It was used as a plow jeep for many years before I bought it I’ll start with the good Runs and drives very well, engine sounds amazing. The body has many patches but the floors are solid. It has a previous registration and plates but no title. Depending on when it sells I might include a spare frame for extra. The half cab is solid and are hard to come by. It comes with a complete plow setup that I know for a fact works. Cons The frame needs a patch before I’d recommend even yard driving it. One of the rear left leaf spring mounts rotted through the frame, the last owner never told me that before driving 6 hours to buy it. The brake lines are all there, unsure if theyre even hooked up, but the brakes don’t work. It’s currently hooked up to an auxiliary gas tank in the bed but I will be including a plastic one. 2700 obo, negotiable in person only, no I’m not parting it out”
The seller has a lot of money into this, but the jeep remains in pieces. The pic below was taken prior to it being disassembled.
https://www.facebook.com/marketplace/item/244281111765795/
“Hello, I have a 1952 Willys CJ3A project for sale. I have had it for about 25 years now and don’t see myself finishing it anytime soon. So it’s time for it to move on. I have about $12k into it and it’s still in pieces. I bought the replacement panels and $4k in parts (see lists in photos). I also had engine completely gone through, machined, and professionally rebuilt ($3k) with hardened vavle seat so it is good for todays gas. It has a Dana 44 rear axle, original heater, professionally rebuilt front and rear driveshafts, and quite a few spare parts including a spare transmission and transfer case. I also have a full steel hard top (no side doors) and a half cab/doors. Have clean title too. I also attached a couple photos of when it was together. I would like to get $6k because there is $4k in parts on the lists alone, $3k in the engine, plus everything else. Open to offers/trades especially a for 55’-59’ Chevy/GMC truck driver/solid project. Goose neck livestock trailer w/lvg qrtrs.”
It’s unclear to me what this is supposed to be, but it’s only $200. Might make an unusual looking racer.
https://www.facebook.com/marketplace/item/215571604853146
“”HJ-7 / Hum-J” Fiberglass body kit for a Jeep CJ, YJ, TJ. Never installed, but has sat outside for years. Cash in person only”
There may be value here.
https://www.facebook.com/marketplace/item/961628288318229
“Mostly held together with bondo. Have original engine at mission motor being stored. Is on an open trailer that can sell with it. Trailer will cost $2,000 if added.”
This 8-page issue has lots of DJ-3As, Surreys, FCs and Wagons. Note the six-wheeled wagon on page six. The issue includes a photo of a CJ-6 being used as a tour jeep at Hell’s Half Acre near Casper, Wyoming (page 3 lower right).
Bill shared this quick-assemble jeep video, though this doesn’t quite look as quick as others we’ve seen.
What’s more interesting is that one of the comments under the video shares how some US jeep dealers ran some contests challenging folks to assemble actual jeeps completely taken apart. This is the first I have heard about this type of contest. I wonder if it was ever documented in any news articles or magazines. Here is the full comment:
“My grandfather’s garage did this in the 1950’s. He owned the first Jeep dealership in Manhattan, because he was selling Willy’s before WWII, so automatically became a Jeep dealership after the War. [Willys] did a promotion where they set up this contest in different dealerships, to see how long to assemble an entire Jeep. But it was completely apart, not in sub assemblies like here. My grandfather won with a time under 4 hours, and they presented him with a solid gold Bulova watch. On the back was engraved his name, the date, and the time it took to put the Jeep together.”
This has a variety of updates, including a Warn OD. Note the various controls installed on the top of the inner windshield.
https://cosprings.craigslist.org/cto/d/colorado-springs-1951-jeep-willys-m38/7682327790.html
“-Ford 289 v8 (rebuilt less than 500mi ago)
-C3 transmission w/ B&M shifter
-T18 transfer case with warn overdrive
-Tires with less than 1000mi
-Rebuilt carb installed with engine rebuild (could use a tune now that engine is breaking in)
-Electric fan
-Vented hood
-Heater
-Electric wipers
-Soft top was installed about 2 years ago and less than 1000mi. Jeep parked under carport since it was installed
-has rear seat
-Front seats don’t match
Jeep runs and drives but could use a carb tune/ choke adjustment and general check over from sitting. Hasn’t been driven more than 100miles in the last year.
I have many spares including a performance intake manifold, spare engine that needs rebuilt, spare carb that needs cleaned and rebuilt, non matching spare wheel and tire, rear tire rack that’s not mounted.
I thought I would use this in the mountains while camping but have barely driven it in the 3+ years I’ve owned it. It’s time to move on and let someone else enjoy it. Asking $6000 OBO”
This has a Porter & Reed hardtop. Seems there is value here.
https://cosprings.craigslist.org/cto/d/colorado-springs-1950-willys-jeep/7678309800.html
“selling a 1950 Willys jeep. Has 134 cubic inch flat head 4 cyl motor needs a new starter and carburetor but engine turns. Has a hydraulic winch but needs to be rebuilt. Aftermarket hard top no doors. All in all its in pretty good shape for the age very little rust or damages. $4000 o.b.o.”
John shared this militarized CJ-5. Though not restored to original, it looks like this was a nut and bolt rebuild at some point. It seems worth a look given the price.
https://www.facebook.com/marketplace/item/3242234996076515
“Fully rebuilt motor and transmission new tires brakes canvas top and seats. Has been sandblasted and painted about 10 yrs ago.”
Only one pic provided.
https://fresno.craigslist.org/cto/d/fresno-1948-willys/7680454782.html
“1948 Willys jeep, big brakes, Ramsey 6k pto winch”
UPDATE: This one is still available.
(09/30/2023) This may be worth a look. The Koenig half cab looks in good shape.
https://www.facebook.com/marketplace/item/733292928607380
“A 1955 Willys Jeep Coupe hardtop 4×4 4-speed 4 cylinder new carb runs with snow plow and hydraulic lift works”
The 2A drives. The MB ma be only a parts rig.
https://billings.craigslist.org/cto/d/billings-willys-jeeps/7676193331.html
“1946 willys Jeep runs good drives 1944 parts I have not tried to start it trades welcome no motorcycles or basket cases please. 1946 is a 6 cylinder 1944 is a 4 cylinder both 4 speeds both engines are jeep engines.”
UPDATE: Still Available.
(10/17/2023) TJ shared this custom camper FC-170. The inside looks in pretty good shape.
https://www.facebook.com/marketplace/item/368375788854901
or https://pullman.craigslist.org/cto/d/moscow-1958-willys-jeep-fc-170/7677156253.html
“1958 Willy’s Jeep FC 170 1958 custom made aluminum camper 1968 302 out of a Mustang, runs Borg Warner 90 3 speed, rebuilt Spicer Dana 20 transfer case- spicer yokes Dana 53 rear end Dana 44 front end Replaced brakes-, power brakes Body is in good shape given it’s age Camper was custom made in Seattle in 1958 Princess 3 burner stove/ propane works Krefft refrig dual feed works on shore power not sure about propane Custom cabinets, new cushions 12 volt and 120 volt lights The Jeep runs and drives but best to transfer on a trailer which I can drive on for you”
UPDATE :**SOLD** Was $4000.
It doesn’t run at the moment, but is supposed to have a solid body.
“Universal CJ5 Open Body is in good condition – no known rust. PTO winch and built-in tow bar on front bumper. Been stored under cover during present owner +/- 10 years. Comes with new Solex carburetor purchased through Jeepsterman recently. New 6 volt battery. Odds are good that it will run when replaced. Ran previously. Back bench seat included.”
