To Top

1953 M-38A1 Rexburg, ID $6500


UPDATE: **SOLD**Was $6500.

1953-m38a1-rexburg-id6 1953-m38a1-rexburg-id7 1953-m38a1-rexburg-id8 1953-m38a1-rexburg-id9

“We’ve owned this Jeep for over 12 years. It’s been our primary trail Jeep. We’ve driven it all over the Targhee N.F. and when we lived in Boise it took us through the Boise Mountains and across the Owyhee Desert. No rock crawling or hard abuse, just easy cruising on gravel roads.

It starts, stops, runs, shifts and steers as it should. It’s mostly stock. We converted it from the 24 volt military system to 12 volts and added some BDS 2 1/2” lift springs and shocks.

F134 4 cylinder engine is strong, compression and oil pressure are good. Transmission and transfer case shift fine. I’ve had the original military carburetor and fuel pump professionally rebuilt. Tires are in great shape.

It’s been a great Jeep for us. But we’ve got a couple other projects going and it’s time for the next owner to enjoy it. Clear Idaho title in my name. $6500. Cash only. No trades. Located in Rexburg, Idaho.”

To Top

Year? DJ-3A? Twinsburg, OH $2850


Tom spotted this amalgamation of parts. Listed as a 1951 CJ-3A, this jeep has a DJ-3A front end, but the front crossmember suggests the frame is not from a DJ. The body could be DJ-3A. The engine isn’t, but it is stuck anyway.

Flat Fender Jeep project. Titled as a 1951 CJ3A is 2WD. I believe it has a 283 Chevy engine in it but engine is stuck and I do not have time to mess with it. Has some rust, but good project. If listing is up it’s available and will not respond to that question.”

1951-cj3a-dj3a-twinsburg-oh0 1951-cj3a-dj3a-twinsburg-oh1 1951-cj3a-dj3a-twinsburg-oh2 1951-cj3a-dj3a-twinsburg-oh8 1951-cj3a-dj3a-twinsburg-oh9

To Top

CJ-5 Renegade Slot Rims Reno, NV eBay

• CATEGORIES: Tires and Rims

Maury shared this ad.

View all the information on eBay


“Here we have for sale an Original 1970’s Jeep CJ7 CJ5 Renegade Factory Forged Aluminum Slotted Wheel. This is a rare and highly sought after wheel that was a factory optional wheel for CJ’s back in the day. The wheel is pretty nice and its been off a Jeep for years. The aluminum is in good shape. The lug holes are in good shape. The wheel measures 15×7. There are a couple nicks in the aluminum and around the outer lip where wheels have been stacked on top of it. It should polish up well and be ready to run again.”

To Top

1957 Truck Coos Bay County, OR $3500

• CATEGORIES: Willys Trucks • TAGS: .

Blaine shared this truck. It’s got a hydraulic dump bed. It also has a Nissan engine.

“Willys pickup…electric over hydraulic dump bed, 4wd, SD 22 Nissan diesel engine. The rig drives but is not roadable. Floor boards rusted out. Buy the complete rig for the asking price, or the rig without the engine for $1500.”

1957-truck-dump-bed-OR1 1957-truck-dump-bed-OR2 1957-truck-dump-bed-OR3 1957-truck-dump-bed-OR4

To Top

1963 CJ-5 Tux Park (II or III?) Covington, VA $2200


Tom shared this project with some parts that appear in good shape.

“1963 willys jeep tuxedo edition. Hasn’t been started in 10 years. Ran great before I took it apart to restore and never did, unfortunately. Everything is there, other then the front windshield. 3 speed manual. Asking $2,200 OBO”

1953-cj5-tuxpark-covington-va1 1953-cj5-tuxpark-covington-va2 1953-cj5-tuxpark-covington-va3 1953-cj5-tuxpark-covington-va4

To Top

1948 CJ-2A with Mahl Loader at Bring-A-Trailer Auction

• CATEGORIES: CJ-2A, Features • TAGS: , , .

Glenn spotted this rare and restored Mahl Loader and CJ-2A. There are a ton of detail photos at BaT’s auction page. Note that the serial number used for the title is an engine number and not the original serial number. So, a buyer might want to consider that it your state is extra picky.

“This 1948 Willys CJ-2A is powered by a 134ci Go-Devil inline-four paired with a three-speed manual transmission and is fitted with a MAHL Jeep Loader attachment produced by Standard Iron & Wire Works Inc. of Minneapolis, Minnesota. The pair was acquired by the seller around 2010 and subsequently refurbished before installation of the loader in 2016. The truck is finished in black over green vinyl and features white-painted 16″  steel wheels, a fold-flat windshield, a dual-range transfer case, a power take-off unit, a Gre-Sen hydraulic pump, and cab-mounted hydraulic controls. This CJ-2A and Jeep Loader are now offered with an award, articles about the project, and a clean Minnesota title in the name of the seller’s company…..

The factory chassis tag has been replaced with a reproduction unit that shows a blank serial number, and the seller is unable to locate the chassis number on the vehicle itself. The last six digits of the VIN on the title—J172095—are consistent with that of a 1948 Willys CJ-2A.”

Here is a video:

More info on the Mahl Loader from the CJ-2A page:

Here’s an article from the Dispatcher Magazine with more info from the auction:



And here are pics:

1948-cj2a-mahl-loader-02 1948-cj2a-mahl-loader-01

Continue reading

To Top

1946 CJ-2A Custom Cab Anaconda, MT $500

• CATEGORIES: CJ-2A, Sedan-jeep • TAGS: , .

Here’s an unusual custom cab for sale spotted by Andy.

“I have a 1946 Jeep cab $500. Need gone asap. You haul.”

1946-cj2a-sedan-anaconda-mt6 1946-cj2a-sedan-anaconda-mt7 1946-cj2a-sedan-anaconda-mt8 1946-cj2a-sedan-anaconda-mt9

To Top

1952 M-38A1 Taberg, NY $6500


This has a PTO and is equipped with duallies.

“Bought the Jeep in PA to restore just don’t have the time to work on it ”

1952-m38a1-taberg-ny5 1952-m38a1-taberg-ny6 1952-m38a1-taberg-ny7 1952-m38a1-taberg-ny8 1952-m38a1-taberg-ny9

To Top

Jeeps and Parts Myrtle, MS $800


Everything for $800. It looks to be one chassis and two CJ-2As?

“Lots of willys Jeeps parts. 1 mostly complete jeep with broken suspension mounts on the front. The motor on it has ran on starting fluid. Body on it is solid just need frame fixed. Also pictured is another jeep body and frame. The frame has the transmission and transfer case but no motor. The second body is pretty rusted out but is salvageable. Have a box of miscellaneous Jeep parts that will come with the body’s. 800 come get it all. Located in North Mississippi.”

jeeps-parts-myrtle-ms2 jeeps-parts-myrtle-ms3 jeeps-parts-myrtle-ms4

To Top

Year? M-38 Stone Mountain, GA $3500


The body on this doesn’t appear too bad, but no pics of the floors posted.

“Willys M38 project not running. Has another engine and transmission to go with it. New 12v wiring harness and a tote of new gaskets and miscellaneous parts. $4500 obo. Stone Mountain Ga. Pick up only”

year-m38-stonemountain-ga2 year-m38-stonemountain-ga3 year-m38-stonemountain-ga4

To Top

1963 Wagon w/Cummins Diesel Tonasket, WA $25,000

• CATEGORIES: Willys Wagons • TAGS: .

Andy shared this build. Lots of mods on this diesel-equipped wagon.

“1963 Willy’s jeep utility vehicle. Motor is a 4BT Cummins with turbo kit. Has a turbo 400 automatic transmission. 1/2 ton Chevy axels. 4 wheel drive. $25,000 OBO”

1963-wagon-tonasket-wa1 1963-wagon-tonasket-wa2 1963-wagon-tonasket-wa3

To Top

1947 CJ-2A Black Diamond, WA $6000


Listed as a 1947 CJ-2A, the body appears to be from a 3A, as it lacks the ignition switch hole on the dash. It also lacks frame horns on the front frame rails.

1947-cj2a-bd-wa6 1947-cj2a-bd-wa7 1947-cj2a-bd-wa8 1947-cj2a-bd-wa9

“1947 Willys CJ2A. Starts, runs, drives, doesn’t stop real well. New master cylinder included. Engine; L4-134 “Go-Devil” Transmission; T-90 Transfer case; Dana 18 Front differential; Dana 25 Rear differential; Dana 41 I have upgraded to 12 volts. New alternator, New battery, new battery cables, new fan belt. I have gotten the title lined out in my name. With new reproduction Serial number plate, new reproduction body and frame tags and a new reproduction dash plate. Also has new in box steering linkage. Will need the wiring played with, lights, ignition switch and such. I have a video of it running on request”

To Top

1948 CJ-2A Stevenson, AL $2400


This is listed as a 1949, but is a 1948 based on the serial number. Unclear how much value is here, but it does have a Sears/Allstate-branded deluxe top.

“1949 Willy’s Jeep CJA. Flathead 4 cylinder motor. It has been sitting but the motor moves freely. It’s all there, transmission, radiator, carburator. Would consider trade. DM any questions”

1948-cj2a-stevenson-al5 1948-cj2a-stevenson-al6 1948-cj2a-stevenson-al7 1948-cj2a-stevenson-al8 1948-cj2a-stevenson-al9

To Top

1951? CJ-3B Oneida, TN $2500


UPDATE: Thanks to Craig for spotting it is actually a 3B tub.

It’s project.

“I’ve got a 51 willys Jeep that could be restored it has a good frame and body I got the windshield and seats and the front fenders just pm me with offers I got the title too”

1951-cj3a-oneida-tn8 1951-cj3a-oneida-tn9

To Top

Year? CJ-?? Cookeville, TN $600


This is probably a 2A with some odd mods. Unclear what value is here.

“Whole ruff jeep with extra motor and transfer case and axle it will bring close to this for junk”

year-flattie-cookeville-tn1 year-flattie-cookeville-tn2

To Top

Jeep Willys Service Sign on eBay

• CATEGORIES: Advertising & Brochures, Features

I’ve not run across a sign quite like this one with the text accompanying the round part of the sign in this way.

View all the information on eBay

“The sign is previously displayed it is made of metal not tin its painted measures 48 in width by 24 in height. I am selling it as shown with no claim of originality. An excellent sign to add to your collection if your looking to own a really unique sign. I am selling this item with no reserve.”


To Top

1955 Custom Truck Placerville, CA $27,500

• CATEGORIES: Willys Trucks • TAGS: , .

Mike’s selling his custom-built truck. Looks like a nice rig. Text or phone to 530 622 9353.

“302 ford. Turbo 400 leather interior. Camaro front clip. Custom short bed.”






To Top

1960s(?) Postcard Pete’s Cave “Shepherd of the Hills Farm” on eBay

• CATEGORIES: Features, Postcards • TAGS: .

UPDATE: Here’s another one of these postcards on eBay. Starting bid is .99.

(08/04/2020) I don’t know much about Shepherd of the Hills Farm, but I did learn that it was a book from 1907 by Harold Bell Wright that became a tourist destination that then played some role in the rise of Branson, Missouri, as a tourist destination.

View all the information on eBay

“Vintage Postcard of the Farm Tour pulled by an old Army Jeep at Pete’s Cave in Shepherd of the Hills in Branson MO
Size Standard 3 1/2 by 5 1/2
Circa 1960s”

petes-cave-shepherd-of-the-hills-postcard-jeep1 petes-cave-shepherd-of-the-hills-postcard-jeep2

To Top

2022 Northern Ohio Flatfender Willys Gathering Aug 28th


This years Northern Ohio Flatfender Willys Gathering will be held Sunday August 28th from 11am-4pm. The address is 4927 Mayfair rd., North Canton, Ohio.  If nothing else, show up for the free jeep-made ice cream after lunch!



To Top

1946 CJ-2A Canonsburg, PA $2500


Chris shared this PTO and rear gear box equipped CJ-2A.

“Any message asking me if it’s available we’ll be deleted. Barn fresh 1946 Willys Jeep CJ-2A. It needs body work. Engine not stuck. I have been adding automatic transmission fluid to the cylinders over the last 6 months. The vehicle is 95% complete. Also has very rare PTO option in rear. I do have the windshield. An excellent project. $2,500 or best offer”

1946-cj2a-canonsburg-pa6 1946-cj2a-canonsburg-pa7 1946-cj2a-canonsburg-pa8 1946-cj2a-canonsburg-pa9

To Top

1946 CJ-2A Moncks Corner, SC **SOLD**


UPDATE: **SOLD** Was $15,000.


1946-cj2a-pa-2 1946-cj2a-pa-3 1946-cj2a-pa-4

\ Continue reading

To Top

The J-Bird Fiberglass Hard Top

• CATEGORIES: Advertising & Brochures, Features • TAGS: .

This ad took me by surprise. I’ve never heard of the J-Bird Fiberglass hard top made by Stanley Aviation. I wonder if there are any left anywhere? I’m guessing it was made in Colorado given this ad was in the Mile-Hi Jeep Club archives.


I was able to find some information about Stanley Aviation, but nothing related to Snaley Aviation and a jeep top.

To Top

WANTED: Info For Off-Road Motorsports Hall of Fame

• CATEGORIES: Features, Old News Articles • TAGS: .

Rick Krueger is hoping to pull together some information for the folks at the Off-Road Motorsports Hall of Fame. So, if you think you might have some information that would help Rick, email him at das.krueg @ (remove the spaces around the @).

Rick wrote, “I have a line on Larry Hughes son Cameron. Dean Richards, Lonnie Richards grand father was a friend of my fathers and Gary Lowes. Dean and Gary played an important part in a boating accident I was in. The name Toy Hall has come up as Commander on a certificate I have found for and award to SNORE in the 70s. So any info from Lionel would be great. Also tracking down a ambulance buggy snore donated to the posse in the 70s. The ORMHOF seems interested so I would like to pull as much together as possible.”

MILE-HI Jeep Club History: Among the online collections at the ORMHOF are some great old photos and history from the Mile-Hi Jeep Club (How is there no PNW4WDA history/race-history here?):

Here is one example of what is posted there. This photo shows the inaugural issue of the Mile HI Club’s Jeep Club News in December 1956.


PHoto Credit: The Mile Hi Jeep Club and the ORMHOF


To Top

November 1944 Photo of Fake Jeep in Australia

• CATEGORIES: Features, Models, Old Images

Here’s. neat photo of a “dummy jeep” cobbled together in Australia, posted by Morihisa Ochi to G503.


To Top

Custom CJ-3B Build

• CATEGORIES: Builds, CJ-3B, Features

Robert Baxter posted this “CJ-3B” to Facebook the other day. He spotted it at a car show in El Segundo, California. The chassis is a deuce-and-a-half. It looks like the body is extra tall and stetted, which gives it an unusual look. Cool rig!

cj3b-el-segundo1 cj3b-el-segundo2