UPDATE: Still Available.
(03/09/2017) Might have a fiberglass body.
“1947 Willys Jeep, 3 Speed Manual, Windshield included, 350 Chevy Motor, Side storage compartments. ”
UPDATE: Still Available.
(03/09/2017) Might have a fiberglass body.
“1947 Willys Jeep, 3 Speed Manual, Windshield included, 350 Chevy Motor, Side storage compartments. ”
Doesn’t start.
“1953 Willys CJ-3b. 4×4. 1988 Chevy 350 ( approximately 25k when installed) Edelbrock intake, 4 bbl Holly. 3sp manual w/ OD. 1-ton power steering, high volume Corvette water pump. Dana 44’s front and rear. front disc brakes, 11′ rear brakes, 33″ tires. new black soft top, bikini top. good seats and interior. Roll cage.
Engine will turn over but will not start due to lack of spark (needs wiring). Exterior dismantle was started for paint prep, but is UN-finished due to lack of funds. needs tires (old) and a battery.
This Jeep has a Maine bill of sale. In order to get a Colorado title you will have to get the VIN verified.
This would be a great project, or a quick flip. I have this priced appropriately so don’t expect me to give it away.
NO SCAMMERS! I don’t need help selling, and will only except cash on the barrel head. ”
UPDATE: **Status Unknown** Was $3500.
(03/21/2017) Looks like a good price.
“1946 Willys (Jeep) CJ2A. Good runner, 4WD works as it should. Needs a few things including muffler and rear brakes. Reason for selling, I bought a RZR. Will consider trades – 2A, RZR Rangerware cab.”
Rare Bobcat 3B hood.
“1954 ch3b high hood with a dodge small block v8 original running gear 4 speed and a overdrive 538 gears custom paint newer top and bikini top 9000 winch and a custom dash”
Not clear what work is needed on this.
“1951 Willy jeep, 327 v-8, 3 speed tranny. My uncle parked it 6 years ago it was running now just needs some work to get it back on the road.he was a member of the auburn jeep club”
Nice looking build.
“We are selling our beloved Willys bad ass toy.
Power train, 327 stroker motor, 350 turbo transmission w/shift kit, Rock Crusher transfer case high/low, 9in rear end, air lockers on all 4 corners w/on board air compressor, New 33×12.5 15in. plus 2 rear paddle tires, Body stretched for tons of leg room, 17 gal custom fuel cell w/custom half doors, Diamond plate, Rhino lined interior, costume bumpers, aluminum tilt column, Corbeau 3 point harness bucket seats, Collector plates, locking center console, FM/CD Stereo chrome high end weather proof duel speakers.”
Lots of custom work. Needs clutch.
“1946 willys jeep. on a cj7 frame. 327 sbc muncie 4 speed. dana 44 front. ford 9 inch rear. 3 link and coil overs front and rear. this is a off road jeep. i used for sand. i have 16.50 paddles for rear and 13.50 front. on chrome rims. it needs a clutch also.no title”
It’s a project.
“PROJECT! It has a 283 sbc and bold 31’s but everything else is pretty original. Has rust. Ran and drove but had radiator and gas tank leak so has been sitting for months. May part out if the price is right. Clean and clear title with registration in my name on non-op with proof. $2200 trade for enduro/quad/dirt bike/dual sport”
UPDATE: Price dropped to $3500. Needs a new tranny.
(11/07/2016) Looks nice.
“1947 Willys jeep for sale
Very clean, nice cage.
Has a chevy 327 out of a 68 camaro that runs great
brand new prp off road seats and harnesses
New tires.
Really just a great vehicle.
All it needs is a tranny. ($500)
My loss your gain at this price.
No lowballers.”
Another unusual build.
http://sandiego.craigslist.org/csd/cto/5981148537.html
“1951 Willy’s Jeep 4X4 CJ3A. $28,000 OBO Fresh resto, you won’t find one nicer at any price, 3400 miles since complete, I drove it from Portland To San Diego, runs like and champ and the best driving jeep you’ve ever driven, no freeway sway, built to be used, reliable and sexy. New crate 350 engine from JEGS with a 454 Lunati lift cam, all MSD ignition and wires, new 2 core 1” aluminum radiator, Kevlar wrapped custom headers, oil cooler, transmission cooler, everything under the hood and entire vehicle is new. Dana 44 limited slip in the rear with new Auburn limited slip spline and hubs (big upgrade over the originals). Dana 27 Limited slip upfront, both axles have new seals and brakes, front disc with power booster, power steering, hydraulic clutch, flaming river adjustable steering column, new 3 speed transmission, T-18 Borg Warner transfer case with over/under drive, Lakewood Bell housing, Center force Clutch assembly, Mean Green gear reduction starter. Smog exempt and current registration paid.
Continue reading
UPDATE: P**SOLD** Was $850. Joe noted the body looks to me an M-38.
(08/10/2016) “For sale i have a Jeep willys flat fender cj2a, i believed its a 1948. It has the stock, diferentials and transfer case, dana18. No tittle for it. What you see is what you get. Call me for more info. ”
UPDATE: Price dropped to $500. No drive train.
(07/20/2016) Appears worth a look. Has some funky aspects.
“Willys Jeep set up for 350 Chevy 2 wheel drive no motor no tranny”
http://miami.craigslist.org/brw/cto/5957481965.html
UPDATE: **SOLD** Was on eBay.
Nice build.
“48 Willys CJ-3A custom, Kenny Bell Buick V-6, Turbo 350. Late model CJ frame and running gear used for the build. Lots of custom parts inside and out. Possible trade RZR/ Maverick”
Interesting design.
“Full roll cage to fit a CJ-5 tub years 55-71.
2″ tube 1/8″ thick. Very well built, came on jeep when I purchased and not what I’m looking for.”
UPDATE: **SOLD** Was $4000.
(03/22/2016) That’s some cage!
“1946 Wyllis with roll cage. Needs master cylinder work and rebuild carb. 31 inch rims included. Has custom bumpers and tows from front.”
Lots of modifications on this unusually stretched CJ-3B.
“This machine is 100% Solid Steel. No bondo, no fiberglass. Built in Colorado by professional machine shop at a cost of $14k. Receipts can be provided. V8 350 Good Wrench motor with less than 1000 miles on it. 4wd, 2 seater and Dual exhaust. This thing can rumble. Brand new tires, transmission, power breaks, and headers. This ride is great but I need the money for the holidays. Received offers to sell locally. There is no reserve on this listing so it will sell. I was burned the last time I listed this so No paypal.”
Looks nice.
“cylinders: 8 cylinders
drive: 4wd
fuel: gas
title status: clean
transmission: manual
Selling my 1947 jeep willys
Has a 327 out of a 68 camaro , full cage ,prp seats and harnesses, runs strong , current registration. Open for trades”
UPDATE: **SOLD** Was $3500.
(08/09/2016) No pics provided.
“51 Willys, 372 Chevy striker, Dana lockers front and rear, 16 forward gears, new paint, carpet,new clutch and pressure plate, be cool aluminum radiator. Needs tired and brake job. Motor out of vehicle. ”
UPDATE: **SOLD** Was $6500.
(10/20/2016) Could be a good price. Interesting roll cage.
“305” Chevy bored to 315″ , T-350 auto, Dana-18 T/Case, Large Axle Dana-44 rear w/lock-rite locker 3:73 ratio, Dana-27 front, Chevy Power steering, tilt steering column, 5-ton winch $6500. Also comes with spare tire, rear seat& full carpeting”
Needs work. The dogs look in pretty good shape. Nice cage, too.
“All metal body with a fiberglass hood. Currently installed 302 V8 (with short 289 waterpump to fit radiator), 3-speed transmission, Dana 20 transfer case. In progress new wiring harness. Full roll-cage fit to the frame. Warn 5k winch.
I have the MB windshield and flip headlights that need restoration.
Needs clutch and brake linkage, drivelines, exhaust, and lube-oil all around.”
UPDATE: **SOLD** Was $7500.
Listed as an M-38, it looks more like a CJ-3A.
“Jeep 1950 Willys M38 with F-Head “Hurricane” 134 Cu. In. Engine. Full Roll Cage With Rack, Fuel Cell. Good Tires and Service Manual. Runs Great!”
Needs some work. The battery now sits behind the front bumper.
“I have a very nice little Jeep.
Very rust free and clean.
Brakes and electrical need work
V6 Oldsmobile engine.
3500 or best offer”
UPDATE: **SOLD** Was $7500.
(02/18/2016) Looks nice.
“1947 Willys-Overland CJ2A
4.25 Lift (3 inch Black Diamond spring lift w/ 1.25 lift Confer shackles)
32×9.5×15 Swamper TSLs (almost nothing for wear)
6 point cage tied to the frame on the front hoop
53′ CJ3A 134ci L-head flathead 4 cylinder
T90 3 speed transmission (rebuilt with a Novak master rebuild kit)
Dana 18 transfer case (rebuilt with a Novak master rebuild kit)
full Painless wiring harness
all new brakes”
UPDATE: **SOLD** Was $8500.
“CJ3 willys high hood
Fuel injected 327 Chevy race engine
Msd ignition
Turbo 400 auto transmission with B&D shifter
Dana 44 rear axle with Detroit locker
Dana 30 front axle with ARB air lockers
Headers on exhaust
Full roll cage to frame
Very quick, reliable, and capable
3 point harness with new seats
New gauges when rebuilt
Electric fan
Warn hubs
Will do anything a side by side will but at less then 1/2 price”
UPDATE: Price dropped to $7500.
(07/20/2016) Looks like a solid build.
“1948 CJ2a, Ford 302 engine, c4 auto transmission, Warn overdrive,Positrac rear,4:10 gear ratio, Chevy tilt steering and box,Rancho springs. Aluminum radiator, two gas tanks. Many receipts of work done by Etreme4wd.Dependable, runs great!”
http://sacramento.craigslist.org/cto/5781614770.html