Looks in good shape. Has a PTO winch up front and a Koenig hardtop.
https://www.facebook.com/marketplace/item/351525072773407
“We did a nice restoration on this Willy’s Jeep. I have lots of information on the things done or replaced”
Looks in good shape. Has a PTO winch up front and a Koenig hardtop.
https://www.facebook.com/marketplace/item/351525072773407
“We did a nice restoration on this Willy’s Jeep. I have lots of information on the things done or replaced”
This is a relatively rare right-hand-drive DJ-3A with an even rarer automatic transmission (see 4th pic… shifter to the right of steering wheel). Unclear how much value is here, but certainly some parts value at the very least. It has an f-head.
https://www.facebook.com/marketplace/item/773489700232581
“I had big plans for this cool little mail jeep but I have too many projects. It is a 1964 DJ3A dispatcher. They stopped making flat fender jeeps in 52 but they had so many parts left over they continue to make flat fender delivery vehicles into the mid 60s. It is very rare, I haven’t seen another one for sale. It does not run or drive, it is a project. I have a clean clear CA title in hand. The Jeep was last registered in 1985 so it is well out of the system.  any questions feel free to ask. Delivery available within reason.  i’m located in shingle Springs, Northern California”
According to this first document, there was a need for more detailed information about Meyer Hardtop parts. So, the company created Form No. 1-387.
These are supplemental instructions for CJ-5s & CJ-6s Meyer Full Cabs. This first is Form No. 1-182-S.
This is Form No. 1-396-S for the CJ-6 and CJ-6A Meyer Full Cab.
This was sold as a Sears Deluxe Hardtop.
https://www.facebook.com/marketplace/item/660207391317664
“Willie’s Jeep Aluminum hard top and front grill with doors.”
Hardtop looks home made. Not sure how much value is here.
https://www.facebook.com/marketplace/item/1007010933052131
“I have for a 1952 willys. This has lockers power brakes power steering. Needs an engine rebuild its locked up. Could make a badass jeep toy or rat rod”
Unclear how much value is here. It’s been converted to 4WD.
https://www.facebook.com/marketplace/item/242271840664694
“Rolling chassis been sitting in the barn Price negotiable Willing to trade for something of equal value ”
UPDATE: **SOLD** Was $7500.
Kyle’s got his rebuild CJ-5 for sale.
“F134, T90,Dana18, 5:38 gears, I bought this 2 years ago at auction. Since then did a full body off frame restoration. Rust free Frame, body has minor rust by drain plugs & rear body mounts. Rebuilt the T90. New complete Exhaust & muffler. It has 30” 15×7.5 Coker tires with spare. New gas tank Solex carburetor but i do have the Carter YF. Myers Hardtop W/ doors but still work in progress. Farmers Draw Bar hitch Seats i made myself. 8 extra 15” wheels I do have extra axles. One from a CJ7 & (2) 1966 CJ5 4:88 axles, covered in snow. It is Titled & has insurance. Price is a bit high, only reason theres high demand for Jeeps. I am flexible on price. Drop me a DM.”
UPDATE: **SOLD** Was $6500.
It turns over, but doesn’t start at the moment. The Kelly hardtop looks to me to be the Custom Full Cab, rather than a Safari top.
“Price reduced…
This Jeep is actually a CJ6 safari edition. It has a pto pinch with snow plow attachment. I don’t have the plow. The engine turns over but don’t start due to the fuel system being disconnected to be cleaned. Just don’t have time to finish it.”
This photo is part of a collection of photos of the 333rd Engineers. No date is given. It looks like this jeep was nicely updated until a wreck or something else caused damage.
Project or parts.
https://reno.craigslist.org/pts/d/fallon-1947-willys-cj2a-jeep/7250586781.html
“For sale or trade is a 1947 Willy’s CJ2A Jeep. The motor was taken out for a conversion before I bought it. All body parts are there as is the transmission and transfer case. I also have an adapter plate for T90 transmission to a small block Chevy. Will consider partial trade for Hodaka motorcycles and parts.”
UPDATE: Still Available.
(12/22/2020) Looks promising.
https://omaha.craigslist.org/cto/d/humphrey-1953-willys-jeep/7249170098.html
“1953 Willy’s Jeep. Very good condition.
Call for details”
If this is from a 1948, it must not have fit it very well. Looks like it is possibly a Kelly Bonanza III hardtop from the late 1960s.
https://springfieldil.craigslist.org/pts/d/farmersville-willys-hard-top-doors/7237630551.html
“from a 1948
*** barn find ***
doors – window glass
hatch & corners – glass
rear sides – plexiglass”
The price listed is $25,000, however maybe it is supposed to be $2500? It looks like it is a lefty. It has a DJ-3A hardtop (CJ-5s has the side windows in the top).
https://jerseyshore.craigslist.org/cto/d/howell-1948-willys-jeep-cj2a/7249444722.html
“1948 Willys jeep CJ2A SOLID PROJECT runs good nice frame comes with plow needs some work”
Has a Sears/Allstate-branded Meyers hardtop. Also has a variety of original parts. Might be a good parts rig.
https://semo.craigslist.org/pts/d/jackson-willys-military-jeep/7242918669.html
“M38 Willy’s Jeep. Early 1950s. No title. Good for parts. All data plates on dash. Calls only.”
UPDATE: **SOLD** Was $6900.
There’s a pending sale on this one.
“1974 Jeep CJ6 Hardtop 4×4 258 6cyl Manual Trans.. Runs & Drives good Minimal rust.”
Looks good as new.
https://palmsprings.craigslist.org/pts/d/yucca-valley-kelly-hard-top-cj5/7235575307.html
“Vintage Kelly Hard Top with Doors for 55-71 CJ5. Completely refurbished. Powdercoated white, new glass seals. all hardware is there. These are rare, mine’s clean.”
UPDATE: **SOLD** Was $5000.
(06/24/2020) Ran when parked, but no info on how long it has been parked. It’s got a Koenig hardtop with the barn doors (more pics here).
“It’s got a Chevy small block 283. It’s definitely a resto project but motor ran when we parked it. Solid body no rust”
UPDATE: Still Available.
(08/12/2020) Marty spotted this rare (only one of two according to the seller) Krisit Company KT-4G Snow Cat. It uses a CJ-5 body with a Meyer hardtop.
https://www.facebook.com/commerce/products/1964-kristi-kt-4g
“This is 1 of 2 ever produced KT-4G units
Perfect item for a snowcat collector who’s looking for a unique snowcat or a very rare Kristi cat, and Yes… this is a Jeep CJ cab on it, which makes it all that better and more rare – fitting in with your Jeep collection as well.
Running engine when parked few years ago, tracks still got life in them if one wanted to simply get it started and run it for a season or more. Some rust on floor pans, but nothing that cant be quickly fixed/repaired for upcoming seasons use, or put this machine through a proper restoration and make it a museum peace for everyone to envy.
Its very complete with all of the original parts, rest can be easily purchased at most auto-part stores.
Unit is not oversized, thus making it easy to transport and deliver”
UPDATE: Price dropped to $2000.
(06/09/2020) Can’t be many unused examples of these left!
https://www.facebook.com/marketplace/item/705315323724878/
“Complete with all parts hardware windows keys and original manual. White/ no rust and never used. All aluminum – purchased from Sears Roebuck. Fits CJ-2A and Military Jeep.”
Lacks an engine. Has new tires and a used Sears Deluxe hardtop.
https://redding.craigslist.org/cto/d/redding-1953-jeep-willys-cj-3b/7240840758.html
“Registration Non Op – Pink slip in hand
Brand New Tires valued at $800
No Engine
Vehicle must be picked up by trailer because of non-op.
Local buyers only (will not play games – no cons)
I screen all calls. Text or leave voicemail.”
Former Smithtown Engineering jeep. It has a Koenig hardtop.
https://www.facebook.com/marketplace/item/732666770687209
“CJ 6 NOT A CHEROKEE. THIS WAS MY COVID LOCKDOWN PROJECT. SITTING SENCE 1978. I GOT UP AND RUNNING. NEW WHEEL CYLS BRAKE LINES AND HOSES TIRES AND TUBES FAN BELT.MOTOR MOUNTS . THIS AND THAT TO MAKE ROAD WORTHY. HAVE MORE NEW PARTS TO INSTALL. I HAVE HAD MY FUN WITH . NOW TIME TO LET SOME ONE FINISH UP AND ENJOY. I DRIVE IT EVERY DAY PEOPLE ALWAYS TAKING PICTURES OF IT. IM MOVING ON TO A CORVAIR PROJECT SO THIS CAN GO. ITS FAR FROM PERFECT. BUT THESE ARE GETTING HARD TO FIND IN ANY WERE NEAR DECENT CONDITION”
UPDATE: Price dropped to $5130.
(09/15/2020) This has some unusual mods.
https://www.facebook.com/marketplace/item/3327670610646364/
“Jeep ratrod all gm running gear 283 Corvette engine with a 2 speed power glide transmission. No rust.dependable cool ride…may trade for the right Harley but must be worth the trade”
The brochures below show brochures from Roplas, a manufacturer out of India that produced Fiberglass Reinforced Plastic (FRP) aftermarket bodies for 91″, 101″, and 104.5″ Mahindra jeeps. These brochures were assembled by Mr. Rahul Ram Amin and shared via the Flat Fender Jeepers Association — FFJA group on Facebook. I’m surprise that none of these bodies made it to the US, at least I’ve never seen them, especially in the Pacific Northwest where fiberglass bodies were readily used.
This fascinating brochure shows a range of special-purpose jeep bodies produced by Roplas, including service vans, police bodies, and ambulance models:
This shows a Roplas body on an MM 540/440 Jeep:
This brochure shows a “Ranger” body on a Mahindra NC 640 DP:
This brochure shows a variety of Jeep body styles built by Roplas for Mahindra models CJ-500D (2Dr & 4Dr) and the NC 665 DP 4Dr Van and Truck. The body products include the Roplas Universal, the Chieftan, the Highlander, the HiRider, and the Cabin.
This brochure shows a Mahindra NC 665: