UPDATE: **SOLD** Was $9000
I think this might have been a DJ-5 at one point.
“Chrysler Automatic Transmission rebuilt, Rambler 6 cylinder engine. Needs steering gear box.”
UPDATE: **SOLD** Was $9000
I think this might have been a DJ-5 at one point.
“Chrysler Automatic Transmission rebuilt, Rambler 6 cylinder engine. Needs steering gear box.”
This has some odd mods.
“This Jeep is being sold for parts. It was bought for parts to fix another older jeep but this one has had some custom modifications from the past owner who used it as a farm vehicle. It has a V-6 and a manual three speed transmission with 4WD. The differentials and transmission would be excellent for off road builds. This jeep is being sold as is and in one piece. It does not have tires so the buyer is responsible for loading and transporting the Jeep. I am ready to get rid of this jeep so the price could be negotiated.”
UPDATE: Still Available.
(05/23/2015) Might have some parts value.
“This is a 49 CJ – 3A Willys Jeep, Motor is locked up. Have a clear title. Serial Number 32872”
UPDATE: Still Available.
(05/30/2014) This style is new to me. I’ve never seen running boards on a glass body like those.
“47 Willys Fiberglass Jeep tub and hood. Need some fiberglass repair in the firewall, but no cracks. In good condition. $700.00″
This is unusual. Seems to have some MB parts and custom parts.
“I HAVE A OLD WILLYS JEEP THAT HAS BEEN MY GARAGE FOR THE LAST TEN YEARS. IT HAS A 1942 FORD TRUCK FRAME APPERANTLY BUT I AM NOT SURE OF ALL THE SPECIFICS. I PULLED IT OUT CHANGED THE OIL, OILED THE GENERATOR, PRIMED THE FUEL PUMP AND CLEANED THE POINTS AND BOOM, IT STARTED UP. IT HAS A BIKINI TOP TO IT. I GOT THIS ABOUT 15 YEARS AGO. I NEVER LICENSED IT. IT HAS A REGISTRATION PAPER DATING TO THE 60S. I SPOKE WITH DMV THIS WEEK AND THEY SAID MADISON SPECIAL REGISTRATION CAN TITLE THIS. THIS IS AN AS IS SALE. BATTERY IS DEAD SO YOU MIGHT WANT TO BRING ONE. OR I CAN PROVIDE ONE TEMPORARILY SO YOU CAN HEAR IT RUN.”
http://northernwi.craigslist.org/cto/5033586965.html
The body has been stretched about 12″?
“Customized 1959 CJ5, Rebuilt with a stainless CJ2A custom body with Stainless removable doors, Bikini top, Roll Bar, fold down windshield, Rebuilt AMC 304 V8 with 3 Spee and Dyna transfer case. 35″ tires. One of a kind.”
UPDATE: **SOLD** Was $750.
Runs.
“I have for sale today a 46 Willis cj2a, the body is shot as is the frame but it does run and drive and the plow works, I used it all winter and it started every time even in the negatives, has very nice front seats and gas tank, could be used as a farm jeep or plow jeep have title as well $750 obo located in new paltz New York”
UPDATE: **SOLD** Was $16,000
(03/17/2015) David spotted this unique, cool GPW Ford truck jeep. It even has a tilt bed.
“42 Ford tilt bed truck – 302 Mustang power – C4 automatic – 9″ rear end. Disc brakes on front, mag wheels, 2 fuel tanks, cloth interior. Currently on a Historical Vehicle license. Great driver. Formerly a magazine car, with copies to go with it.”
UPDATE: **Status Unknown** Was $15,000. Note the Willys Truck cab.
“CUSTOM BUILT…
1948 WILLYS JEEP CAB
454 BIG BLOCK CHEVY…
4,000 MILES ON ENGINE AND TIRES
4 SPEED TRANS
4,000 WATT GENERATOR”
UPDATE: Still Available.
(10/01/2014) There are a few jeep parts under this crazy vehicle.
“homemade tractor converted from mid 1930’s willy’s jeep
have to see in person to believe
chains on tires
has plow attachment on front
newer honda 5 hp motor runs 2 transmissions
powerful easily hauls a cord of tree length wood or move a car
rear has a hitch with ball for pulling trailers
great conversation and show piece
guaranteed not to find anywhere else”
UPDATE: **SOLD** Was $5600.
Brakes are stuck. Made for truck-pulls. No title.
Vintage Willys Jeep sitting on a Chevrolet Truck 4×4 frame custom built. Vehicle is in good condition, it has always been stored inside and not exposed to weather. Although the vehicle has been sitting inside for several years, after putting fresh gas in the tank the Chevrolet 350 Engine was cranked and it does run. It will go into gear and would lot drive but the front brakes are stuck and will need some work. The vehicle does not have a battery so it will need a new one. The vehicle was put together to run in tractor pulls but never was used for that purpose. It has been in used parades and on display but cannot be driven on the highway as this vehicle has been heavily modified.
Continue reading
UPDATE: **SOLD** Was $10,000.
Truck body on Blazer chassis.
“1961 Willys off-road project truck.
Engine – 327 ci SBC with 670 CFM Truck Avenger Carburetor (Engine runs good, does not burn oil, and no excessive blow-by)
Transmission – GM Turbo 400 with B&M shift kit, B&M Ratchet Shifter, and 1500 RPM Hughes stall converter
Body – 1961 Willys cab, hood, and rear fenders. Custom fabricated bed and front fenders. Entire body shot with Gator Guard (truck bed liner) inside and out (red exterior and black interior). The are a few minor cracks in the liner mainly on the hood and passenger side door.
Frame – 1973 Chevy Blazer with 8″ removed in mid-section
Suspension – Rancho triple shock towers in both front and rear
Front Differential – Dana 44
Rear Differential – GM 10.5″ 14-bolt
Notes: Truck has small ATF leak from transmission pan and oil leak from rear tail stock (rear drive line yoke seal). Engine runs great and transmission is strong (leaks started after sitting some time in the garage). Full digital dash (speedo pickup needs new tang into transmission).”
UPDATE: Price dropped to $1300.
“First $2000 takes it. We are moving & the military won’t ship it. NORL included. Doesn’t start. If you get it tonight, I’ll include a brand new $200 Optima battery I haven’t opened yet.”
UPDATE: Was $3800. **SOLD**
“I have a 1948 willies jeep on a 1980s bronco frame I’m looking to trade it for a 90s chevy front end is locked 4×4 works great carb was just rebuilt motor runs great has a manifold leak my truck broke down and I need a different vehicle for right now or cash to fix”
UPDATE: **SOLD** Was $10,500.
(04/26/2014) This is a one-of-a-kind wagon.
“1950 Willys body, 1 ton chevy frame, 1949 Chrysler straight 8 engine and trans. Front disc breaks, New wheels and tires, Runs and drives great, clear Blue title. $12,500 O.B.O. open to trades. text ONLY please.”
UPDATE: **SOLD** Was $18,495
(09/18/2014) Nowhere in the ad (that I could find) does it mention this is a custom body.
“1954 Willys Jeep CJ-3 High Hood
134cu 4 Cylinder Engine
Fully Restored
Rare High Hood
New Soft Top
Stainless Steel Trim
Roll Bar
Rear Seat
3 Speed Transmission with OverDrive
4 Wheel Drive
Please if you have any question at all, feel free to email me or give me a call at anytime.”
This oddball is back on Craigslist.
“this costume 52 willys has a lot of work done to it rebuilt 327 chevy 300hp 328fbl torc dino test edlebrock 4 barrel carb and intake bell housing to 79 toy. landcruser trans , transfer case and axels new hydro clutch ,flywheel new disc brake conversion new leaf springs all spring over conversion new pain less wiring harness off frame restoration all new floorin primer needs to be finished radiator gas tank exhaust some wiring hook up brake lines paint”
UPDATE: **SOLD** Was $8000.
(06/23/2015) It’s street legal, too.
“Chevy 454, tunnel ram, roller rockers, chromolly pushrods, Isky cam, lifters, and springs, complete MSD ignition system, gear drive, Turbo 400 trans. with 2400 stall converter, narrowed 9″ Ford rear end with 5.29 gears and spool, tubed back half, Mustang II front end, wheelie bars, all Auto Meter gauges, 33 X 15.50 Mickey Thompson Pro tires on the rear, 15 X 14 Weld wheels in the rear, 15 X 3 Weld wheels up front, PRP seats with 5 point harnesses, lots more goodies!
This Jeep is street legal with current tags. Great cruising vehicle. Must see!!!”
UPDATE: **SOLD** Was $250
Josh spotted these jeeps.
“Two 1940’s WW2 type military jeeps…floating axles…
As is for parts etc….Located in makawao”
UPDATE: This is back on Craigslist. Last listed in 2013. Was $1500.
(09/07/2013) “1946 Willys This is a 46 Jeep body with some sort of old truck cab attached. The conversion was done may years ago and the body is in decent shape, with very little rust. I drove it into the garage about 4 years ago and have done nothing with it since. It will need new gas and probably the carb cleaned to make it run. 1500.00 firm. I have a clean PA title in my name.”
UPDATE: **SOLD** Was $1650.
Mike’s selling his project. The hardtop is unusual.
“For Sale a project I have lost interest in. I have a 1948 Willys Jeep CJ2A body/tub, front fenders, hood, grill and aluminum hardtop too…then I also have a brand new 2×4 steel tube frame, and running gear from a 1985 CJ7, 2.5 motor, D300 transfer case, front end, rear end, radiator, hanging pedals too, I just picked up a T5 5 speed transmission, a T18 Ford truck trans, and also the original T90 that went with the Willys originally. This would make someone a great project with a lot of the hard work done but a lot is also still needed to finish.”
UPDATE: Was $8900.
(01/22/2014) How about the front of this modified CJ-6? I think there’s some potential in that design. However, the rest of this didn’t inspire me as much.
“Selling a rare 1944 Jeep Willies Replica. Only 1,300 miles. Great vehicle for fun. Perfect beach cruiser. brand new rims and tires.”
UPDATE: **SOLD** Was $1100.
Doesn’t run.
“1947 Willy’s jeep cj2a
Has a fiberglass tub, fenders, hood, grill.
Not running, have extra motor for parts.
$1100 or partial trades for TJ hardtop and/or TJ parts.”