Hubs Research Archives

To Top

A Hubber: Easy Engage’s Device For Hub Management

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Marty notes that this is called a “hubber”, a correction from “scubber”.

Barney from Barney’s Jeep Parts shared an image of this Easy Engage device. It’s called a “hubber” (no R) and it’s made of a durable plastic. It’s used to engage certain types of Warn hubs.

He added: “They were a dealership counter accessory on a cardboard display, but were not Kaiser or AMC Jeep. It works perfect if the hubs are properly lubricated or not in a “parking” bind. And, it won’t mar the metal as homemade ones can.”

Scubber-easy-engage-warn-hub-barneys-parts copy

 
To Top

International Harvester Warn-style Hubs? Forestdale, MA $75

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

I haven’t run across IH marked hubs with a Warn design. Anyone else seen these?

https://www.facebook.com/marketplace/item/1198366567173783/

“International harvester stamped lock out hubs, will fit 10 spline Dana 25 and Dana 27 axles”

IH-warn-hubs-10spline3

IH-warn-hubs-10spline1 IH-warn-hubs-10spline2

 
To Top

1955 M-38A1 Monticello, UT **SOLD**

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5500.

This has a CJ-5 grille, but an M-38A1 body. The rear has been extended on the body. This might have a set of Thor Auto-matic hubs on it, but I can’t tell for certain.

“V-6, 227 Conversion, hard top and hard doors included, and tow bar”

1955-m38a1-monticello-ut

 
To Top

John’s Cutlas Selective Hub Rebuild

• CATEGORIES: Builds, Features, How To • TAGS: This site contains affiliate links for which I may be compensated.

John recently rebuilt a set of Cutlas Selective Hubs, the type with the knob that rotates to engage and disengage the hub. There appear to be at least two styles of these hubs, one with a flat top and one with a groove, so that a tool (or improvised tool) can be used to help engage, disengage the hub.

This exploded overview from 1961 shows how the parts assemble (see the full brochure below this post):

1961-12-01-cutlas-selective-drive-model100-2-partial-lores

As you can kind of see from this diagram, there are two sections: 1) is the hub cap that holds the knob and the spring in place (from part 107-2 in the middle and everything to the right of it) and 2) the hub base (part 108-2 and everything to the left of it).

John wrote, “Overall I’d say these are my favorite hubs I’ve worked on so far. I have a pair of Warn hubs (with the tiny needle bearings) and a pair of Selectro hubs (big chrome knob type). The Warns seemed like a real pain to rebuild since the needle bearing were in rough shape. And the Selectro hubs, while very easy to operate, were probably the weakest design I’ve seen.”

Here’s a look at John’s finished product, as it’s the best example a complete hub next to a hub with the top separated from the base:

cutlas-hub-groove-rebuild-john8-lores

I went with a 2 tone paint job just for fun. If it doesn’t last for any reason I’ll end up with the whole thing gloss black and a chrome knob. The body was so badly pitted there was no saving the original finish

HUB CAP:

We’ll start with the hub’s cap first. John provided the following note: “To remove the coupling piece (part 102-2 Coupling) from the chrome cap (with the cutlas knob) you have to line it up right with the correct groove, then push down firmly against the spring inside (part 110-2 coupling spring). While pushing down spin the coupling, and then the coupling spring will pop the coupling right out and its free.”

cutlas-hub-groove-rebuild-john3-lores

cutlas-hub-groove-rebuild-john4-lores

With the inner portion of the cap apart, you can see the coupling ring, the coupling, the coupling cam spring (part 107-2) and the coupling cam pins (parts 105-2).

cutlas-hub-groove-rebuild-john2-lores

Continue reading

 
To Top

1961 Cutlas Parts & Price List Brochure

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

This December 1961 back-to-back brochure shows the parts break-downs and price lists for the early non-slot Cutlas Selective Hub model 100-2 and the Power Lock Hub. See John’s rebuild of the Cutlas Selective Hub here.

1961-12-01-cutlas-selective-drive-model100-2-lores

1961-12-01-cutlas-power-lock-hubs-lores

 
To Top

Kelly Manufacturing Hub Brochure

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

This 8.5″ x 11″ brochure from Kelly Manufacturing is from approximately 1960.

1960-kelly-manufacturing-hubs-brochure1-lores 1960-kelly-manufacturing-hubs-brochure2-lores

 
To Top

1958-1960 Cutlas Power-Lock Brochures

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE II: This version of the Power-Lock brochure was posted to eWillys in May of 2023.

I hadn’t seen this version of the Cutlas Power-Lock brochure. Given the 1959 date, this is likely one of the earliest Power-Lock brochures. This brochure doesn’t not include a form number.

cutlas-powerlock-brochure-wl6-model

======================

UPDATE April 16, 2020: The bottom brochure examples show a brochure from 1958, probably Cutlas’ first one. You’ll note that the brochure (and the hub itself) was branded “Power-Lock”. However, the 1960 brochure (shown just below this text) lacks any “Power-Lock”branding. Perhaps someone else knows why, but I can find no reason why. Maybe there was some concern about whether the patent would be awarded? (It wasn’t awarded until 1962). 

1960 Cutlas Hub Brochure:

1960-cutlas-hubs-brochure-automatic-hubs1-lores 1960-cutlas-hubs-brochure-automatic-hubs2-lores

 

============================

Originally posted Feb of 2019:

This Power-Lock was the first hub patented (1958), copyrighted (1958), and sold under the Cutlas brand. As I mention in my Free-Lock article, for reasons unknown, the president of Free-Lock became the president of Cutlas. Even more curious, the last two model of Free-Lock hubs were WL-57 and WL-58.

And, what was the Initial model of the first Cutlas hub you ask? That would be WL-6, shown below (1958 Cutlas Hub Brochure):

cutlas-powerlock-hub-brochure1 cutlas-powerlock-hub-brochure2

 

 
To Top

Unusual Dualmatic/Selectro-Like Hub

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

More on Dualmatic/Selectro hubs here.

As part of a discussion on hubs on Facebook, someone from Australia posted a photo of his CJ-6 that came with these unusual hubs. They are similar in external design to the Dualmatic/Selectro, have only 3 “bumps” or “tabs” rather than the standard six around the side of the hub. There’s no brand name on the hub or any other identifying characteristics. A search on Australian 4WD sites and on the Australian patent site did not reveal any information.

Anyone ever seen these?

selectro-dualmatic-unknown-version2

selectro-dualmatic-unknown-version3

For comparison, this is a Sears private branded Dualmatic/Selectro (sears branded) hub in the first pic and a Free-lock branded hub in the second pic.

sears-hub

selectro-like-free-lock-hubs3

 
To Top

1962 CJ-5 Orange County, CA $15,500

• CATEGORIES: CJ5 • TAGS: , , This site contains affiliate links for which I may be compensated.

This includes a working set of Thor Electronic Hubs (and the first pic I’ve seen of the switch to engage the hubs). These are the “Lectro-Matic” version of the hubs (there was also an automatic version). Dan documented a set of the “Lectro-Matric” hubs here.

https://www.facebook.com/marketplace/item/513933489290838/

“Anyone looking for the coolest 62 Jeep CJ5 on the planet. I got this handsome little guy up for sale. It’s beyond amazing! Everything works, every light, all gauges, the chrome winch ect…oh and there’s chrome all over the place. Original paint, Original interior.. both are in incredible condition. It’s a very unique Jeep and it’s running a Corvette engine that was installed by the original owner in the mid sixties.He was a aircraft mechanic so everything is perfect .It also has very rare Thor electronic locking front hub set . No rust anywhere and super straight. I have the those crazy off road wide white wall tires in the pics and the hubcaps. I just threw on a new set of Power King black walls to drive it around. The Jeep runs amazing! It’s got really good power and not geared that low. I have not taken it on the freeway but got it up to 60mph with no issues. This is a very special Jeep with history. Ca title & current registration in my name”

1962-cj5-oc-ca2 1962-cj5-oc-ca3 1962-cj5-oc-ca4 1962-cj5-oc-ca5 1962-cj5-oc-ca6

 
To Top

Kelly Manufacturing Self Locking Hubs

• CATEGORIES: Features • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  This post has been updated with more pics. Also, there is currently a Kelly Hub brochure on eBay.

In May of 1957, DA Ruben L. Beck filed a patent for a new hub design. Beck was a dreamer and like many dreamers, some saw him a genius while others thought him just plain crazy. Beck’s goal was to create a simple, but effective, four-wheel-drive hub.

kelly-hubs-da-ruben-beck-patent2 kelly-hubs-da-ruben-beck-patent1

Beck had already made an early impact in the jeep world, when he founded D.L. Beck Manfucaturing in Middleport, Ohio, a company that made hardtops (see Beck hardtop history here).

1954-beck-all-steel-cab-brochure1Beck sold his hardtop company to Hubert A. Kelly, in the 1950s but Beck and Kelly remained in contact. The date of the sale, thought once to be 1951, is less clear after this document hit eBay in 2014. It indicates Beck was still selling hardtops in 1954.

1954-beck-all-steel-cab-brochure3

No matter when the sale occurred, Hubert took control. It wasn’t long after the patent filing that Mike Kelly, Hubert Kelly’s descendent, remembered seeing the hubs for the first time. He thought that was about 1958. I asked that he review the patent and Mike sent me the following notes:

“The Kelly Self Locking Hub I knew a was little different than the one pictured in the patent drawing. The housing was larger in diameter and had reliefs milled along the outside to allow clearance for the mounting bolts. The internal parts looked very similar to what I remember. I’m pretty sure the final Kelly product was a Beck design. I don’t recall anyone else working on it.

The hubs were manufactured in Charleston West Virginia. We already had an large machine shop there on Broad St. So moving production from Ohio to West Virgina was only logical. I know the assembling the hubs could be “interesting” if you weren’t watching what you were doing. Putting the internal workings together with the ball bearings being under spring pressure woke up more than one man who wasn’t paying attention.”
Photos Photos

Continue reading

 
To Top

1955 Warn Hubs Manual **SOLD**

• CATEGORIES: Advertising & Brochures, Documents, Features • TAGS: This site contains affiliate links for which I may be compensated.

This early Warn manual No. WD-255 sold on eBay for $36.20. My last bid was $35.20, so someone out there outbid me.

1955-02-warn-hubs-manual2 1955-02-warn-hubs-manual3 1955-02-warn-hubs-manual4 1955-02-warn-hubs-manual5

 
To Top

Set of Kelly Hubs $200

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

There’s a very nice set of Kelly 10-spline hubs for sale over at the Old Willys Forum.

https://www.oldwillysforum.com/forum/index.php?threads/kelly-10-spline-locking-hubs.16970/

“Nice pair of vintage Kelly hubs . Very unique!
These are 10 spline Hubs are smooth to turn and in very nice condition.”

kelly-hubs.jpg

 
To Top

Cutlas Selective Drive Hubs Viroqua, MN **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $100.

These 10-spline hubs were called the Cutlas Selective Drive Hubs. Some has the indent through the middle like this set, others did not.

cutlas-hubs9

“For sale is a set of vintage Cutlas 10 spline locking hubs for Willys Jeeps. These were removed from a 1951 M38 with 20,000 original miles. The hubs were added after its Military duty so they are very low mile and in fantastic condition inside and out. Photos were taken as they came off the M38, clean as can be inside. Only reason im parting with them is because I returned the hubs to Milspec/factory configuration.

Should fit DANA 25/27 Willys MB/GPW, CJ2A, CJ3A, M38, CJ3B as well as some Willys wagons.”

 
To Top

Sears Selectro 19 Spline Hubs on eBay

• CATEGORIES: Features, Parts • TAGS: This site contains affiliate links for which I may be compensated.

These appear in good shape. You can learn more about the Selectro history here.

View all the information on ebay

“I don’t know if Selectro made these for Sears? But the Selectro ones look like these. You don’t see many with the Sears name, I believe they are 19 spline. 3″ across bottom gear. Need cleaned up and greased.”

sears-selectro-19-spline

 
To Top

Allstate Locking Hub Rebuild

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a nicely detailed look at the rebuilding of the Allstate Locking Hubs/aka Husky Hubs.

https://imageevent.com/dad2nick/allstatelockinghubs

allstate-husky-hub-rebuild-overview

 
To Top

Various Hubs Sacramento, CA **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $100 a pair.

Some hubs for sale.

“10 spline 6 bolt, $100 a pair”

Watson Hubs (originally patented by Dualmatic):

watson-hubs-sacramento-ca

Selectro Hubs Made by Dualmatic/Husky:

selectro-hubs-sacramento-ca

4 Wheel Drive hubs private labeled, but manufactured by Dualmatic/Husky:

4wheel-drive-selectro-hubs-sacramento-ca

Allstate Hubs private labeled by and manufactured by Dualmatic/Husky:

allstate-hubs-sacramento-ca

Warn Hubs:warn-hubs-sacramento-ca

 
To Top

1949 CJ-3A Windsor, CO $2500

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(11/05/2018) This 3A appear to have an early set of Dualmatic hubs.

https://denver.craigslist.org/cto/d/windsor-1949cj3awillysjeep/6904297997.html

“This is for a 1949 Willys cj3a jeep with a running 6 cylinder Ford engine but no title, good ranch or hunting rig for only $2995.00 cash.”

early-dualmatic-hubs 1949-cj3a-windsor-c1 1949-cj3a-windsor-co2

 
To Top

Dualmatic Selective Drive Brochure

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

I’m way behind on my document scans. I thought I’d catch up today, but between our search for a new bed (Ann’s back is giving her issues) and the fact that Ann accidentally left the plastic bbq brush (why???) in the bbq, which melted into an ugly mess when I turned on the bbq, forcing me to clean the whole thing, all meant that I didn’t have time once again for scans.

Anyhow, here’s the promised Dualmatic brochure. The brochure is directly and has some stains, so they aren’t the best scans. But, they’ll do for now.

dualmatic-hub-brochure-lores1 dualmatic-hub-brochure-lores2 dualmatic-hub-brochure-lores3 dualmatic-hub-brochure-lores4

 
To Top

1953 M-38A1 Penryn, CA **SOLD**

• CATEGORIES: M-38A1 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2777.

This early M-38A1 has some rare Dana HubLok hubs. It also has a Warn/Saturn overdrive and a Meyer hardtop.

1953-m38a1-perynn-ca0 1953-m38a1-perynn-ca1 1953-m38a1-perynn-ca2 1953-m38a1-perynn-ca4 1953-m38a1-hublok-hubs-perynn-ca

“1953 Jeep Willys M38A1 (Maybe) definately Army Style! Clean Title, Registered on non-op currently, F-head 4-Cylinder Engine, 3-Speed Manual- IO Range/Overdrive – Power Steering, Manual Locking hubs, Recent Valve job. Runs good. Please e-mail with a name and phone number and I will call back.”

 

 
To Top

Cutlas Hubs Juliustown, NJ $99

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

Maury spotted these early Cutlas hubs on eBay. The seller owns “New Jersey’s largest Jeep parts depot”.

View all the information on eBay

custlas-hubs

 
To Top

NOS Chrome Dualmatic Hubs **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE **SOLD** Was on eBay.

Starting bid is $300.

dualmatic-chrome-hubs

“Up for auction is a pair of NOS Dualmatic locking hubs. They are Chrome and in excellent condition. Comes with instructions and original decal, bolts, and locking clips. Unfortunately I do NOT have the parts catalog so I can NOT ID these by make and model. But I can give you dimensions: 4.375 overall diameter, 3.125 long, 10 internal spline, 3.750 bolt hole pattern center to center. The dualmatic # 80. I am selling these as is as described. Please be sure they are what you’re looking for before bidding. Please email with any questions. High bidder pays$16.50 for S&H.”

 
To Top

Dualmatic Hubs Brochure

• CATEGORIES: Advertising & Brochures, Features • TAGS: This site contains affiliate links for which I may be compensated.

I won this rare Dualmatic brochure on eBay. I’ll follow up with more detailed pics once I receive the document.

dualmatic-hub-brochure1 dualmatic-hub-brochure2 dualmatic-hub-brochure3 dualmatic-hub-brochure4

 

 
To Top

Perfect Circle Company Hubs $180

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

Blaine found a set of NOS Perfect Circle hubs, which look to be private-labeled versions of the Selectro hub manufactured by Dualmatic. Unfamilar with Perfect Circle, I wondered why the company would private label a set of hubs.

It turns out that Perfect Circle had been a leader in the development of piston rings for several decades. In 1963, the company was purchased by the Dana Corporation. It’s possible that relationship led to the private labeling of the hubs. (Read the whole Perfect Circle history here)

These particular hubs should fit the Dana 27 axles, as that was the standard axle on early Scouts (but I’m not expert on the Scouts).
perfect-circle-dana-27-scout-hubs

We’ve seen the above hubs branded under multiple names, including Dualmatic, Selectro, Perfect Circle, Free-Lock, and others. But, where did the hubs originate?

Unfortunately, as this point I only have theories rather than actual answers. One theory is that they were developed by Free-Lock, but not patented, prior to Free-Lock’s demise. Somehow, Dualamatic/Husky ended up with the hubs (probably purchased Free-Lock’s assets) and then Dualmatic manufacturing them under the Free-Lock brand, then other brands.

My second theory is that the hub is based on this hub patent from Clark Peterson in 1955.

1955-03-07-peterson-hub-patent

It has the spring system and It appears the entire top of the hub twists. But, there are some differences. The central bolt does not exist to hold the hub in place, instead side bolds secure the top. Maybe someone who has a set of these hubs can compare it to the hub design above? Below is a schematic of a Dualmatic hub for comparison.

dualmatic-selectro-hub-schematic

 

 
To Top

Set of Warn WL-2 Locking Hubs Commack, NY **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $150.

Original box, too!

“Selling (2) two Willy’s Jeep WL-2 Locking Hubs–Warn Mfg. Co.
In original box; asking $150 for the pair.”

2-wl2-warn-hubs-li-ny

 
To Top

1951 CJ-3A Blanca, CO $6800

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $6800.

(08/24/2018) This might have a rare set of Thor hubs.

https://rockies.craigslist.org/cto/d/blanca-1951-willys-cj3a/6855871599.html

“1951 Willys CJ3A. original Willys Go Devil flathead 4 cylinder engine, T-90 3 speed, D-18 2 speed transfer case. Runs like new, All original except, Aluminum radiator, 12 volt electrical system, Electronic ignition distributor, 15 inch wheels with Federal Couragia M/T LT 235/75R15 Tires. Has a New (1 year old) Bestop soft top. It is kept in my garage. 66,xxx original miles.
$14,500 Firm!”

1951-cj3a-thor-hub-blanca-co 1951-cj3a-blanca-co6 1951-cj3a-blanca-co7 1951-cj3a-blanca-co8 1951-cj3a-blanca-co9