This article, and the short two page article that follows it, appeared in the Summer 1974 issue of The Milestone Car periodical. I’d never heard of this publication nor the associated “Milestone Car Society”.
Two Dealer-Focused Ads from 1953 and 1956
Here are tow ads directed at existing or potential dealers. The first is from Willys-Overland likely in early 1953 and can be found here on eBay. Note the lack of a CJ-3B within the jeep-family that is shown.
This second one (here on eBay) is reported to have been published in 1956, though it lacks the CJ-6 or DJ-3A, so maybe early 1956? What’s curious is that by this time, the new “Willys Motors” organization had refocused on the “Jeep” brand. So, to see the brochure specifically refer to “Willys”, especially as the car brand was abandoned, is especially odd. This kind of has a recycled feel, as if someone in a hurry re-used an early 1950s ad.
NOS J-Series Dash Compass on eBay
UPDATE: Barney provided these pics of the compass from his 1962 leatherette dealer intro book for the J-series dated 1962.
==============
Maury shared this ebay auction. I wasn’t aware these existed. With 7 days left in the auction, the bidding has already reached $256!
View all the information on eBay
“This is a: NOS 1960’s Jeep Dash Accessory COMPASS ASSEMBLY KIT Factory Part 933536 RARE. This compass is in good, unused condition and appears ready for installation. It shows no signs of ever being mounted or used. The compass is working well, as intended. This kit comes complete with mounting bracket and hardware. The body is green in color which appears to be one of 3 different colors offered, according to the instruction sheet. The paperwork states this to be correct for J-Series applications and is dated 1963. This is a must have for any serious Jeep collector or restorer. This is the first new old stock Jeep compass I’ve come across in my many years of collecting parts. This will make a great addition to your classic restoration project.”
1942 GPW Rocklin, CA **SOLD**
UPDATE: **SOLD** Was $3500.
It’s project that likely won’t be for sale much longer …
“George is a 1942 Ford GPW that will be your next project. He deserves to be brought back to life and not the storage unit he has become.
Turns over, but is not running.
Battery is two years old.
Fresh oil change two years ago.
Fuel tank was professionally cleaned and resealed by Auburn Servicenter Radiator.
Not pictured: two hoods, windshield frame, seat cushions and spare wheel
Garaged for the past 23 years.
Title in hand and registered through 1/10/2024.”
1951 CJ-3A Fresno, CA $24,999
This is a classic Fresno-area build with the oversize glass in the windshield, the doors, and more. It may include a soft top. I see no evidence it includes a Muller top.
https://fresno.craigslist.org/cto/d/fresno-1951-jeep-cj3a/7672608100.html
“Very clean Jeep CJ3a, 2nd owner, owned by the seller over 50 yrs.
SBC 350, Turbo 400, Spicer 18 transfer case, Warn overdrive 25%,
Dana 30 front, fresh Dana 44 rear
(new bearings, gears and LSD), Warn winch, big brakes, clean paint, good tires, and new dual fuel tanks. Upholstery and carpet is 4 yrs old with very little use.
Can be seen by appointment in Fresno CA.
You don’t see many like this one for sale. Odometer just rolled over last week, perfect starting point for the new owner”
1951 2WD Wagon Soap Lake, WA $13,277
Has some interior updates, but looks solid.
https://seattle.craigslist.org/see/cto/d/soap-lake-1951-jeep-willys-price-drop/7668417134.html
“1951 Willys Wagon, original, 3 on the tree w/OD, interior great shape, nice prior restoration. Runs as it should…drive it home”
Vintage Signal Corps BC-659-J RAdio McLean, VA $550
UPDATE: **SOLD**? Was $550.
“Vintage Signal Corps BC-659-J radio with with Signal Corps Case 79-A. The radio is missing some of the crystals and other components so not in working condition. The radio is period correct for WW2 military vehicles and Willys MB/GPW. I’m not sure if the Case 79-A is WW2 or post war. Both leather handles in nice shape and very solid, canvas straps and clips solid, power cables in great shape – nice and flexible.
Would like to sell as a set for $550 but can sell BC-659 radio separately for $450 and CS-79-A for $150.
Due to what the scammers get away with, am selling strictly as-is and as photographed with no returns, this is the exact set you will receive, please see the many photos for what is here, and ask any questions. LARGE AND HEAVY, will help pack it for for shipment (paid separately by the buyer) and of course local pick-up is always welcomed.”
1950 CJ-3A Brush Prairie, WA $7500
This sounds like it needs some work, but unclear the scope needed.
https://portland.craigslist.org/clk/cto/d/brush-prairie-1950-jeep/7670067054.html
“The Jeep was a project for our father who was dealing with some family health issues. This Jeep was like a model he had in the early years. We had a local shop do what I would describe as a makeover. They cleaned and painted the interior and visible exterior surfaces. They made what repairs were required to make it run and drive. In the process we replaced the canvas top, seats, gas tank, tail gate, starter motor, emergence brake kit among other smaller items.
The family enjoyed seeing him driving the Jeep on our property and it was a great distraction for all of us. If you’re interested in a project like this, the makeover we did would be a great first step towards a restoration project. There is the usual body erosion to deal with. The original engine, running gear and steering gear will require repairs to some degree.”
1942 Tub and Parts Quakertown, PA $3500
Zak’s selling these parts.
https://forums.g503.com/viewtopic.php?f=5&t=336639
1942 Ford GPW tub, fenders, hood, grill, windshield frame, seats and modern repair panels as shown with the ripples dents, dings, and poor patch repairs you would expect after 80 years of use. The floor and hood were cut for a larger F head engine and transmission and some point in the part along with some rough riveted patches. However all the repair panels and parts (tother than simple flat patches) are included to bring it back. Full front floor pan with hat channels that costs more than $700 dollars on its own plus repair parts including the drivers side pioneer kit area, inner rear fender/tool box panels. Inner windshield frame. Bensinger wheelhouse pockets to move the seats back for more leg room if desired. It has its original F marked seats and side grab handles. All original parts have been soda blasted and weldable primed. Rerpo repair patch parts are factory red primed. Pickup preferred but could work with buyer to arrange shipping in a crate at buyers expense. Was going to build as a LRDP jeep and keep most of the imperfections. Bill of sale only. Asking $3,500. Located in Quakertown, PA.
1950 Sedan Delivery JeepRod Lakeside, CA $14,000
The outside and engine look great, but the interior could use some updating.
https://sandiego.craigslist.org/esd/cto/d/el-cajon-1950-willys-panel/7674710235.html
“Chevy running gear from front to rear. All steel. No rust. 350/400. Tilt wheel. Electric seats. Runs & drives great.
Title in my name. $14,000 OBO.”
1942? MB? + Trailer Milton, WA $5000
Unclear if the jeep runs or not.
https://seattle.craigslist.org/tac/cto/d/milton-1942-willys-jeep-with-trailer/7669331321.html
“1942 Willys Jeep project with:
Hard top
Trailer”
1943 MB w/ CJ Tub Georgetown, CA $400
Unclear how much value is here.
https://www.facebook.com/marketplace/item/335098839095540/
“Original frame with gun turret mount, axles and front grill no motor transmission or transfer case. No Title. Vin intact, out of system. 20 yrs since registered. CJ 2A tub and miscellaneous parts on body, tub is rough. Need it gone, selling as a parts vehicle”
1948? Bobcat Body Corvallis, OR $2000
That looks to be a 1970s Bobcat body with the passenger filler indent along the side.
https://corvallis.craigslist.org/cto/d/corvallis-1948-willies-jeep-cj2a/7669873621.html
“Bought a number of years ago and just never got around to it. All it boxes and tubs. No seats, no fuel cell. 231 odd fire V6 x2. One is a short block as the long block I bought it with has a cracked block. I intended to swap the heads and intake and never got to it. Engine stand comes with project jeep.”
1949 CJ-3A Gresham, OR $5000
Seller doesn’t appear to know what they have or what it is worth. My guess is that it has been sitting there a while. Value unclear.
https://portland.craigslist.org/mlt/pts/d/gresham-49-jeep-willys/7666835790.html
“Selling for my brother in law. No idea what I’m selling.”
1946 CJ-2A Vallejo, CA $2500
UPDATE: Price dropped to $2500.
(09/16/2023) Doesn’t run. The tub appears to be a replacement tub.
https://sfbay.craigslist.org/eby/pts/d/port-costa-1946-jeep-cj-2a/7665721480.html
“All original, complete 1946-1947 Army Jeep. Original engine, body in excellent conditions. Complete original example. Garage stored, tool box under seat working as it should. Motor turns over but has not ran in a few years. 3A windshield, Tags shown on frame and match numbers on motor. Lost title, serious buyers only.”
March 1966 Warn Brochure
This March 1966 4-page Warn brochure is form number DC-366-25, which I take to mean it was produced in March of 1966.
1949 Wagon Gardnerville, NV **SOLD**
1978 CJ-5 Spokane, WA $5900
This CJ-5 was modified to dig post holes.
https://www.facebook.com/marketplace/item/1015076379624158
“This is a highly modified Jeep designed to dig post holes. It’s a 78 CJ5, in running order and comes with a 6″, 9″, and 12″ auger. I think it can dig as deep as 6′. The best part about this design for digging holes, is the passenger seat faces backwards and has all the controls for driving.”
1950? CJ-3A Rathdrum, ID $2800
I feel like we’ve seen a jeep with a similar top that is or was for sale.
https://www.facebook.com/marketplace/item/697927085170328
“CJ3a project vehicle. It is very complete and fairly straight. Minimal rust. Has pto winch on it. Not running, NO TITLE!”
1953 CJ-3A Reno, NV $5200
UPDATE: Price dropped to $5200.
(07/15/2023) This one has some mods.
https://www.facebook.com/marketplace/item/1439337639962836/
“Oh1953 Jeep CJ3A Four wheel drive Buick V6 Runs and drives Good project vehicle Pink slip in hand”
1962 CJ-3B Buhl, ID $7000
This could be worth a look.
https://www.facebook.com/marketplace/item/210164758554484/
“1962 jeep CJ3B it has a hurricane f38 engine rebuilt by Clark’s garage less than 5000 miles ago. It needs tires and carburetor but runs and drives it has new brakes and lines new clutch and flywheel. I do not have back seat the heater or the top”
1947 Sand Drag Jeep Portland, OR $20,000
this appears to have a later-generation bobcat fiberglass body.
https://www.facebook.com/marketplace/item/258587787151511/
“New aluminum floors new roll cage all new motor fired one time 215 dirt aluminum heads Crower 675 lift 282 duration solid lifter cam crawler roller rockers crowder rods 11 to one Keith Black pop-up Pistons all the goodies all new 588 Ford 9-in posi rear end all new brakes new gauges ready to go very fast”
Koenig Hardtop Crossville, TN $400
This early CJ-2A Koenig top includes the rear delivery door option.
https://cookeville.craigslist.org/pts/d/crossville-willys-jeep-hard-top/7665307433.html
“Hard top for Jeep Cj2A(Top Only). Roll-up windows in doors. Barn doors in back. Sliding windows in side of top.
$400. OBO.”
1946 CJ-2A Resaca, GA $1200
It doesn’t run, but there may be value here. It’s got a fiberglass body.
https://nwga.craigslist.org/cto/d/resaca-1946-willys-jeep/7672378150.html
“1946 Willys Jeep for Sale
This Jeep is not running. I took it in trade and was told it was running when parked many years ago. I have had a battery in it and the engine does turn over. I was told it is a 1946 so I can only assume that is correct. The body looks to have been replaced with a fiberglass body at some point. From the cowl back it is fiberglass. The front fenders and inner fenders are steel. It looks to have the original running gear, although the shifter seems to be stuck in neutral. (There is no Title) The sale will be Bill of Sale only
Look at pictures, If you’re interested you can text me at 901 six one nine 692nine with questions. Due to spam calls I do not answer calls from unknown callers. Please make sure you text me before you call.
Reasonable offers will be considered.
Thanks for your interest”
CJ-2A Parts Neptune, NJ
Gus has been restoring a CJ-2A that he found on eWillys. Now, he’s got some parts to sell.
1: T-90 and Spicer 18 $500: https://jerseyshore.craigslist.org/pts/d/neptune-cj2a-transmisson/7674062983.html
2: CJ2A PARTS (PRICE MOST TAKE ALL) – $400 https://jerseyshore.craigslist.org/pts/d/neptune-cj2a-parts-price-most-take-all/7674062470.html
“2 transmission bell houses sandblasted and primed
2 fly wheels
2 copper radiators
3 manifolds
1 go devil engine head
Back hitch-pto accessory
tie rods
Radiator shroud
Transmission (rough shape either for parts or can get it going with work)
Transmission shifter
STEERING GEAR BOX TUBE & WORM GEAR
BACK AXEL IN BACK OF PICTURE NOT INCLUDED”