I’m looking for a set of FC seats or even just seat frames (I’ll likely be recovering them so they match the tour jeep bench seats in back). My goal is to convert tour jeep’s seats back to the original style of seats as a part of capturing a little more of the original feel of the tour jeep.
Free-Locks Hubs Custer, SD eBay
This looks like the initial one-screw style of Free-Lock Hubs: http://www.ewillys.com/2021/09/09/free-lock-hubs/
“Working on selling parts for my dad who is 82 years old. Is a bit tough to get information because of his memory. I will do my best. He says he bought these hubs for his 1946 Willys Jeep years ago. They seem to be in fine condition. He has had his parts stored for a number of years.”
1948 CJ-2A Lake Arrowhead, CA $10,000
Looks in reasonable shape.
https://inlandempire.craigslist.org/cto/d/cedar-glen-willys-jeep-cj-2a/7675970245.html
“Very cool Willys , runs like champ ! New trans, fuel pump, shocks, manifold, carburetor, wheels, tires, battery, 12 volt system.”
1953 CJ-3B Falmouth, MA $10,000
Derek posted this 3B to FB. It looks like a nice jeep.
“Frame up restoration about 15 years back. 12 volt, electronic ignition, overdrive, aftermarket heater. Looks and runs good. Have some spare parts as well including a Fisher plow set up minus the blade. Located in Falmouth, Massachusetts. Titled, registered, and inspected in Massachusetts.”
1946 CJ-2A Potomac, MT $14,500
This is listed in Montana, but possibly stored in Wash State. It appears solid.
https://missoula.craigslist.org/cto/d/bonner-1946-willys-cj2a/7676676499.html
“For Sale – 1946 CJ2A Willys with clear Title. $14,500.00 It is 100% original. This has been completely disassembled, sandblasted and rebuilt. Frame was sandblasted, Por 15 Primer used before painting. Tub is original and has American Made repair parts. No Juan MD or and foreign parts are on the Willys. Transmission, Transfer Case, Front and Rear Differential have been rebuilt. Engine was rebuilt at a previous time. Engine starts right up and runs smooth and uses no oil at all. New Leaf Springs, Brakes, Brake Lines, Tires and Wheels are original and have been sandblasted and Powder Coated. New Seats and Cushions. All the gauges are reproduction American Made. The Speedometer is original but does not work (you will not break the speed limit). Much more that I cannot remember it all.
I do have a Snow Plow that is original for the Willys CJ2A. It is located in Washington State and can be easily retrieved.
This is a reliable, fun Willys to go around the mountain roads of Montana or anywhere else. I always get the High 5 or Thumbs up when I am out and about.
I do have lots of picture of when it “
1964 CJ-3B Auburn, CA $4300
TJ shared this 3B for sale. Rather than being military, like the seller suggests, it more likely has got a replacement body.
https://www.facebook.com/marketplace/item/947570210342181
“1964 Kaiser /Willys high cj3b hood runs good needs tires and I believe it was originally a US military vehicle ”
1952 M-38A1 Kalispell, MT $3900
This runs and drives.
https://kalispell.craigslist.org/cto/d/kalispell-1952-military-m38a1-jeep/7679849677.html
“1952 Military M38A1 Jeep runs and drives. This is a barn find in very restorable; unmolested condition.
It has surprisingly solid sheet metal with very minor rusting.
Hs correct windshield on it with new glass and rubber.
Tires and wheels seen in photos have been removed. Will have rollers on it. Can provide as set of the original correct 16”military wheels for $399.00
This jeep is 69 years old. This has value to collectors of military vehicles; because it would be a relatively easy restoration; considering its condition.
I can text or email video of the motor running.
Asking $3,900.00 “
1969 CJ-5 Moses Lake, WA $4500
This appears worth a look.
https://moseslake.craigslist.org/pts/d/moses-lake-69-willies-jeep-for-sale/7677545080.html
“69 willies has chev 350 runs good no idea on mileage. Good tires great project.”
1946 CJ-2A Hemet, CA $3500
Unclear just how much value is here, but the body seems in pretty good shape.
https://inlandempire.craigslist.org/cto/d/hemet-project-jeep/7677777337.html
“1946 cj2a project. All parts I have included.”
1949 Truck Denmark, NY **SOLD**
UPDATE: **SOLD** Was $600.
Mike share this truck. It seems like there’s value here.
“1949 Willys column shift Pickup with rear tank and snow plow. Timkin rear. It is located in Central Valley NY. Has good floors and sheet metal. It has an F head engine swapped in. My friend’s father died and he had it running last year. Gas tank is on the seat inside. No brakes and no tail lights. It is a 4WD vehicle. There is no registration that we can find but the serial number tag is there and he will provide a bill of sale. The tank on back goes with the Willys as does the snow plow blade. He is including a 9 hp Briggs and Stratton Industrial generator in this price. Cash only at pickup.”
Custom Jeep Brooksville, FL $1000
Here’s an odd one.
https://www.facebook.com/marketplace/item/1297866277600228/
“So, this has been in my family for quite a while. Believe my great grandpa ‘created’ this back in the 80’s and would mainly use it as a hunting vehicle. To my understanding mostly all the exterior is fiberglass, cab space is mainly sheet metal, engine and chassis are from an old jeep (willys jeep or jeep CJ) sometime in the 1940’s-60’s. Price is OBO, if you think you have any info on the chassis and engine based on the pictures let me know, I would like to learn more about it myself. Have the cylinder head and other parts but are in kind of rough shape as you could assume”
1948 CJ-2A Dillon, MT $5500
UPDATE: Price dropped to $5500.
(10/28/2020) Lots of clearance for the F-head in this CJ-2A.
https://butte.craigslist.org/cto/d/dillon-1948-willys-jeep/7675122149.html
“11inch drums an f head motor. Cj2. 6000 or trade for street bike no project bikes or classic muscle car in runing driving condition”
1949 CJ-3A Chancellor, SD $1500
Engine is stuck.
https://www.facebook.com/commerce/listing/865529394886068
“1949 Jeep Willys Jeep CJ3A. Been sitting since early 80s, have Dana 25 axles to swap with a willys wagon frame. The willys is 100% complete down to the key and 6v battery from the 80s. The motor is currently stuck but has been bathing in mystery oil the last few months. It was parked due to front axle situation. No title but your local tow yard can get you one for cheap. The frame is solid however tub has some rot, which is reflected in the price. If you are looking for an unmolested project, here is your chance! ”
Testimonials: Davis Farm Contracting
Originally Published Feb 12, 2014: Davis Farm Contracting tried everything, but a jeep proved the most satisfactory vehicle for their company.
Rod Taylor’s CJ-5 … Does it Have a Tux Package?
John B. is a fan of Rod Taylor, an actor who starred in the short-lived 1971 TV series “Bearcats”, which John watched as a teen. I was six in 1971 and don’t remember ever watching it. Here’s an introduction to it:
The reason this top surfaced is because John sent me a photo showing Rod Taylor with a CJ-5. The question is, does it have a Tux package? It appears to have chrome hood latches and a chrome bumper, but the bumper is straight and not curved like a Tux Park package. Did the 1961-63 Tux Packages ever used a straight bumper like that?
Gasoline Ration Book w/ Ford GP on Cover on eBay
This Gasoline Ration Book prominently features a Ford GP-looking jeep.
View all the information on eBay
““Sinclair Oil Willys Jeep WWII Uncle Sam Gasoline Ration Book Alton IL. 4 X 2 inch paper folder/sleeve with mileage card and ration stamps. honest wear from use and age.”
J.I.M. “Jeep Is Mine” Photos on eBay
Kind of a curious thing to put on the front of a jeep?
View all the information on eBay
“Lot of slides as shown. Each feature the same Jeep with Jeep Is Mine J.I.M. on front. Probably in the Washington State or Alaska area based on other slides from same estate.”
1967 Jeep-O-Rama Colorado Booklet on eBay
Other than a few ads, it isn’t clear what’s inside this booklet or how many pages it is.
View all the information on eBay
“Vintage 7th Annual National Jeep O Rama 1967 Denver Colorado.”
1952 M-38A1 Post Falls, ID **Status Unknown**
UPDATE: Status Unknown. Was $15,450.
This is a nice looking M-38A1.Thanks to JohnB for sharing it.
“1952 M38A1 restored Military jeep for sale. Engine, transmissions, and differentials rebuilt. Military signal lights, Military aluminum top with military hot water heater. No rust, frame, body, and top painted air force blue. 24 volt electrical system,”
1950 Jeepster JeepRod Chattaroy, WA $26,000
Lots of interesting customizations on this Jeepster.
https://spokane.craigslist.org/cto/d/chattaroy-custom-willys-jeepster/7680397671.html
“Full Custom 1950 Willys Jeepster. It just doesn’t get more unique or custom than this. Powered by a great running Chevy 350 with throttle body fuel injection spinning a 5-speed manual tranny. Sits on a Mustang II type suspension with disc brakes up front and drums in rear. Has a custom built interior, console, and a dash off a ‘40 Ford fitted with 3rd generation Firebird gauges and tilt steering. The hardtop is removable making it a slick little roadster to enjoy. It also has shaved door handles and the custom built tonneau cover for all your goodies.
Painted in a vibrant metallic blue with a bit of tasteful pin striping throughout. Deep old school rumble coming out the cherry bombs on each side. $26,500 seems like a very good deal for you from me. Let’s see what you think. You could not build this car for anything near that. I have gone thru the car nose to toes to make it safe and realizable. I have thousands of dollars of receipts that will go with the car. For the person that wants a very good and distinctive clean driver classic.”
1946 CJ-2A Grand Junction, CO **Sold**
UPDATE **Sold** Was $6500.
This has a variety of updates.
“1946 Jeep Willys, CJ2A, 4×4, lifted with 34inch Super Swamper tires, Ford 302 V8, dual exhaust with glass packs, drives runs and sounds great! 12 volt conversion, new brake lines with dual reservoir master cylinder, new spark plugs and wires, new radiator, hoses, belts, etc. Clean Colorado title”
1948 CJ-2A Nyssa, OR $1500
This appears to have a Bobcat fiberglass hood.
https://boise.craigslist.org/cto/d/nyssa-1948-cj2a-project/7675825725.html
“1948 Willys CJ2A project. Good tub, comes with hard top. Has some parts that go to it. Has no engine or transmission. Clean title, some rust. See pictures for more details. I paid 1700 for it, just asking 1500 OBO. I would like to sell soon.
I am willing to negotiate price. I am also willing to do a partial trade.”
1948 CJ-2A Mineral, OR $1800
Includes a 2nd L-head.
https://redding.craigslist.org/cto/d/mineral-1948-willys-jeep/7678352311.html
“Jeep Project (Parts or Restoration)
48 Willys Jeep
Frame
Drive Train
Most body parts, with extra body parts as well as additional parts
Extra ORIGINAL Engine (two Go Devil 4 cylinder)
Buick V6 engine, (included but not original)
Excellent Tail gate, no rust, no dents
Extra front clip and hood in excellent condition (not pictured) Pictured fenders and Hood (Good)
Lots of small miscellaneous parts
$1800 or possible trade for F/A or MO”
1951 M-38 Gardnerville, NV $3800
It’s a project.
https://reno.craigslist.org/pts/d/gardnerville-1951-willys-jeep-m38/7661669983.html
“1951 Willys M38 project my son and I started a few years ago. He has since moved away and is busy building his career, so it is time for the M38 to go. It had a Buick V-6 oddfire which was no good, so we built up a GM slightly later model V-6, which is currently in the longblock stage. Have most of the parts and sheetmetal, just needs someone to finish. Have title.”
PTO + Gearbox + Drum Pulley Spokane Valley, WA $2000
The seller has the governor handle, but not the governor assembly (if I understand correctly).
https://spokane.craigslist.org/pts/d/spokane-cj-jeep-pto-belt-drive/7681455740.html
“1949 CJ3a PTO assembly with the Belt Drive adapter.
Still currently mounted in the jeep so it can be used and shown to work, planning on pulling it sometime this month. Only thing missing is the Novi Governor under the hood. I don’t intend to restore this jeep to factory and it doesn’t suit any need I have other than looking really cool.
This PTO should mount to any CJ jeep or most older Jeeps that have the Dana 18 transfer case from what I know.
I’m selling just the PTO assembly, not the whole Jeep”