UPDATE: **SOLD** Was $1500.
(05/27/2018) Appears to have a replacement body.
“Serious inquiries ONLY!! NO txt NO scammers!! All parts go with the carb and fuel tank needs put on to run which are with the parts CASH ONLY NO TRADES!!”
UPDATE: **SOLD** Was $1500.
(05/27/2018) Appears to have a replacement body.
“Serious inquiries ONLY!! NO txt NO scammers!! All parts go with the carb and fuel tank needs put on to run which are with the parts CASH ONLY NO TRADES!!”
UPDATE: Still Available.
(06/03/2018) It runs.
https://chicago.craigslist.org/nwi/cto/d/willys-jeep-fc-170/6605748055.html
“1960 FC-170 running and clean title. Located 1 1/2 hours east of Chicago. Original engine and transmission.”
Seth just finished his winter project: a VW diesel conversion on his CJ-3A. Last November he bought a 1949 CJ-3A, but didn’t discover it had a bad block until he pulled the engine apart. So he decided to install a VW engine, while keeping everything else as close to original as he could; it still has the t-90, Spicer-18, Saturn overdrive, Dana 25/41 (lockrite F/R). As a result, the new engine produces 110hp/190ft and he is averaging 38 miles per gallon!
I asked Seth a few questions. Here are his answers:
1) What gave you the idea to us that engine?
I’ve always been a fan of diesel swapped jeeps. My CJ-5 has a Mercedes diesel in it. When I started rebuilding the CJ-3A I realized the l-head would need some work. So, I thought rather than spend money on that, why not put a TDI in it? The engine was already sitting under the work bench as a spare for my daily driver (TDI jetta wagon). I have a small lathe & mill in my basement. It took endless nights making chips and taking measurements. But it’s in and it works!
2) Did you run into any unexpected issues?
I ran into many issues. Some were expected, others were a total surprise. My biggest challenge is that this was not a previously documented swap. So, I was on my own. Honestly there were a few times I almost threw in the towel. The biggest issue was just physically fitting the engine in the jeep. My goal was to keep the jeep as untouched as possible. that meant leaving the drive train in the stock location. I wanted all original driveshafts, cross member and trans cover, etc.
Looks like it’s been fixed up.
https://chicago.craigslist.org/wcl/atq/d/vintage-willys-jeep-ride-on/6603709279.html
“From 1950s Structo Willy’s Jeep Large Ride on toy (Not pedal) made of pressed steel.26 inch Long x 10 inch wide x 12 inch Tall.. Price is firm.. Nice display piece!!!”
UPDATE: still Available.
(06/01/2017) Seth thought someone might enjoy this one. It’s a dual cowl, wooden bench Jeepster.
“1949 Dual Cowl Phaeton, 4 cyl, tuned exhaust, hi-rise intake, 3 sp, bench seats. NEW motor, brakes, susp, steering.”
https://chicago.craigslist.org/sox/cto/d/willys-jeep-jeepster-rat-rod/6608840403.html
UPDATE: **SOLD** Was $1795.
Runs.
“1963 Willys Jeep
Has title
Starts and runs, shifts good,
4 cylinder engine
New fuel pump, fuel lines, fuel filter.
Gas gauge works.
Hand throttle works
Heater fan control works”
Could use larger pics.
https://duluth.craigslist.org/cto/d/1952-willys-military-jeep/6606437608.html
“Jeep has been completely restored from the ground up. It has a 4 cylinder engine that runs great.
Asking $11,000 o.b.o”
UPDATE: **SOLD** Was $14,000.
Looks good. Seller settling estate.
“1949 Jeep Willys. Has been completely restored from frame up. All body and mechanical done. Drive great. Has less than 100 miles since restoration. Was my fathers, now selling to settle estate.”
The rear floor might have been replaced with some diamond plating.
https://tricities.craigslist.org/for/d/willys-jeep-1949-cj3a-and/6594982114.html
“Willys 1949 CJ3A with M100 Trailer. We’ve put a lot of work into restoring this jeep. I have a canvas top and frame also. I have receipts for all parts and work that has been done. Everything on brakes has been replaced new. Carburetor rebuilt by Old Jeep Carbs. New gauges and all new wiring. New alternator, starter, exhaust, hoses, and other items. Body is in excellent shape.”
Has a few minor updates. Might be worth a look.
https://boone.craigslist.org/cto/d/1946-willys-jeep/6601954761.html
“Needs some body work but runs good and in overall good shape and engine is solid. Has new starter, gas tank and lines, brake lines, exhaust system. 4-wheel drive was redone 3 or 4 years ago. Carburetor was rebuilt a few years back. comes with extra set of used wheels.”
It’s a project. Former luggage jeep.
https://stlouis.craigslist.org/pts/d/1961-willys/6610188717.html
“I have a 61 Willy’s two wheel drive. It was used at the airport to move luggage. Has a 4 cylinder engine. The engine doesn’t run but does have compression and spare. Body is in decent shape with rust. Grill is in good shape windshield is gone but frame is there. The Odometer says 35000. I do have the original title for the Jeep. Bought to put on a cj5 frame but to much work to make it fit. Gave 700 hundred for it just trying to get that back or trade for tub, fenders , grill etc for 74 cj5.”
Doesn’t run. Includes parts.
https://minneapolis.craigslist.org/wsh/cto/d/46-willys-j2/6607172562.html
“One complete, non running Willy’s Jeep with many many extra parts.”
There could be value if the drive train is in good shape. Seller has a YJ for sale, too.
https://minneapolis.craigslist.org/dak/cto/d/jeep-cj5/6607559859.html
“For sale is a 1974 jeep cj-5 I bought it as a project but never had time for it. It’s mostly complete, but the engine is torn apart. Transfer case is halfway torn apart and i didnt touch the tranny. Have both driveshafts and the axles are good. I have the yj (pictured) that I was going to put the drivetrain from that in the cj5. It has the 4.2 6cyl and 5 speed. Id let that go as well for $1500 extra. I will not sell it separately
I have the title for both and the yj runs and drives. $900 for the cj5 and all of its parts and $2000 for both. Would trade for an enclosed trailer”
Seller has a couple different vehicles and parts.
https://milwaukee.craigslist.org/cto/d/jeep-cj-5-2/6610164329.html
“For parts or rebuild project or projects. White is a 53 jeep cj5, 4 cylinder overhead valve engine. Engine was rebuilt years ago and was running and driving when parked, used it for plowing but not in years. Red/White is i believe a 48 cj2 or cj2a, believe it has the flathead 4. Has been sitting the same way for years, also have a rolling chassis. All have been sitting outside and have titles. All manual trans with manual transfer case. The rolling frame has the rear pto option. If I remember correctly there also is an extra flathead 4 engine disassembled and has been sitting under cover. If interested contact to set up a time to look at and make offer.”
Not sure how much v value is here.
https://asheville.craigslist.org/cto/d/1949ish-willis-cj2a-jeep/6607632109.html
“All the running gears are with the body… body in rough shape but motor trans and all parts still there waiting for a rebuild!!! My father has 2 of these and will never have the time to fix this one!! Hate to see it just sit and rust to the ground….. please call or text if interested (title in hand!!!!)”
Some value?
https://up.craigslist.org/cto/d/1957-willys-jeep-cj5/6602993629.html
“1957 Willys Jeep CJ5 for parts. Has some good use able parts left on it. 4 cylinder F Head 134. No title.”
Kelly, or possibly Beck, hardtop.
https://up.craigslist.org/pts/d/willys-jeep-cj2a-hard-top/6603000650.html
“Hard top came off of a 1946 CJ2A. I have both doors and the rear hatch for it. Glass is cracked on most windows. But otherwise looks in pretty good shape”
Minimalist Ad. No pics.
https://detroit.craigslist.org/wyn/pts/d/1952-cj3/6611379329.html
“CJ3 Willy’s Overland Jeep”
UPDATE: **SOLD** was $900.
Seller has other parts, too.
“1948 Willys CJ2A Tub $900
Fenders $250 for the pair
Hood $150
Grille $125
This was a complete jeep at one time. Painted Yellow and all parts match in color.
Will make a great deal for all parts bought together $1300”
UPDATE: Price dropped to $1000. Changed to a 1946 (from 1948). Rusty runner.
https://up.craigslist.org/cto/d/46-willys-cj2a/6611411518.html
“Starts, runs, drives, good tires, needs work”
No updates Friday.
My kids got me a brand new Henckel 8″ Chef’s knife for my birthday. Thursday night, while making some Pig Skin tacos (Tacos de Chicaron), I managed to cut my finger. So, I’ll be taking the day off of typing 🙂 … tacos turned out great! I got the idea from the Taco place we ate at in Lexington, Kentucky.
<– Day 37 – Monday June 4th: Up and Over the Rockies | OVERVIEW –>
Day 38 & 39: Day 38, Tuesday, was my birthday. We spent the day in Salt Lake City doing almost nothing. We spent some time in the park and I played some guitar. Later, we went out to dinner with my boys. On Wednesday, we drove home to Pasco. Naturally, we had a hiccup: Our Verizon hotspot died (it was pretty old), so we stopped at where our trip started, the Verizon Store in Twin Falls, Idaho. We made it back to Pasco at 4pm PST, very tired.
I want to thank EVERYONE who welcomed us into their homes, offered advice on where we should go, met us at the Reunion, gave us tours, shared their jeeps and stories, purchased our posters and t-shirts, gave us gifts, donated money, bought us or made us dinner, and interacted with us along the way. Without ALL of you, these trips that we make would be far less interesting and enjoyable. Seeing jeeps is fun, but meeting people and seeing new places are the best parts. So, thanks for allowing us to be a part of your worlds, even if briefly.
TRIP STATS: 9,751 miles through 24 states over 39 days. Below is a rough map of the trip.
That’s it for the 2018 East Coast Willys Reunion trip!
<– Day 37 – Monday June 4th: Up and Over the Rockies | No More Additional Posts
Looks in good shape.
https://longisland.craigslist.org/cto/d/willys-cj2a-jeep/6584614006.html
“1946 Willys CJ2A. This was a frame off restoration 3 years ago. Body, floors and frame are rock solid. Rebuilt engine with less than 500 miles. Everything works, heater, lights, turn signals and four wheel drive. All new wiring, new tires, brakes and a custom made top and seat covers by Beechwood Canvas. Warn Overdrive installed, also will include rear PTO, drive shaft and gear shift, original radiator and original engine which can be rebuilt ( was running, stuck valves). This Jeep runs great and is very reliable.”
UPDATE: **SOLD** Was $10,500.
Needs finishing of some kind.
“1947 Willys Jeep
4cyl very nice
Low miles since completion
Needs some finishing touches”
UPDATE: **SOLD** Was $6400.
This might be a good price.
“M151 A1 1965 Army jeep with mounted 50 cal replica gun, 4×4, radio mount, many spare parts, manuals, training videos”