I bought one of this seller’s Morrison brochure. It’s in very good condition. It is unclear how many of these he has. I suspect it’s from the late 1940s, given it only features CJ-2As.

View all the information on ebay

“You are buying or bidding on a rare vintage early 1950’s “The Morrison-Built Rogers Sno-Dozer For Jeeps” brochure. This was originally sold as a plow and scraper and was from the late 40’s. They were later produced by the Morrison Railway Supply Corp. Buffalo, New York. This is 5 1/2″ x 8 1/2″ opens twice to a 11″ x 8 1/2″. This is in excellent condition.(see pics)”

The Meyer Snow Plow brochure includes a large section about the ElectroLift. Labeled form no. 3-163, the brochure is a standard paper side with a half-paper-sized section that folds out horizontally to reveal more details about the Electrolift. There is not date on this brochure, but I’d guess early 1960s.

Note that the left side of the back of this brochure is the same as the image above. It’s the right side that folds out. 

These two two-page brochures from Meyer once again highlight the company’s snow plows.

This first brochure showcases the Meyer Angle Dozer and is dated July of 1962 and is form no. 3-114 (though on the backside it shows 3-114 R2, suggesting the backside may have been a 1st or 2nd revision):

This second one is an undated form no. 3-283, but given it includes a Jeepster Commando, it is likely from the late 1960s.:

These two brochures offer optional equipment for Meyer snow plows. I’ve been unable to make sense of the Meyer brochure numbers.

Form No. 3-208 is a four page brochure that highlights optional equipment for Meyer snow plows.

This center section utilizes two pages:

This is the back page:

=====================

Form No. 3-217 is a one page brochure that highlights marker kits installed atop Meyer Snow plows to make them easier to see.

Given the early Wagoneer and the (25M63) printed on the back, this may be a Meyer Snow Plow tri-fold brochure from 1963.

This is the center, 3-page foldout:

Back page:

This brochures shows that Meyer was well established in the plow industry before the arrival of the jeep.

View all the information on eBay

“1940’s Meyer Snow Plows Advertising Foldout Brochure
Description: Up for sale is a 1940’s Meyer Snow Plows Advertising Foldout Brochure.
Approx Measurement: 11″ x 8.5″.
Condition: VG-. Age and handling wear throughout. Nearly split along the fold. Still a nice rare item.”

This first four-page brochure blends pages two and three into a single, poster like image. It could make for a good poster.

This is a four-page brochure:

This is a single sheet, two-sided brochure for Meyer’s Offset Angledozer showing flat fender jeeps:

Continue reading →

These 1957 Scheneker Iron Works snow plow brochures sold for $29 on eBay this weekend, more than I thought they’d go for.

This set of 1957 Arps snow plow brochures sold on eBay this weekend for $12.50. Learn more about Arps/Blackhawk plows here.

This early Meyer snow plow brochure sold on eBay. I was busy buying a few other things yesterday, so decided to let this one go. If someone out there purchased it, feel free to send me some lo res scans (d @ dealers.com) that I can share with folks.

UPDATE: **SOLD** Was on eBay.

Maury spotted this one. Listed as a 1943 Ad, this clearly was a post war ad. The first clue is the CJ looking grille. The second clue is the suggestion that folks could find a plow at their “Jeep Dealer”. It’s likely a late 1940s brochure, as it has shown up in late 1940s Willys-Overland Special Equipment booklets.

This 32-page snow plow manual includes a variety of jeep-related photos.

View all the information on eBay

“Here I have an Excellent Condition 32-Page Brochure
MEYER SNOW PLOWS SNOW PLOWING MANUAL
Measures about 8 ½ x 5 ½ inches
Near Mint condition except it has 2 holes punched to fit in a ring notebook
Has some great photos inside of 1950s vehicles
including several Willys Jeeps”

UPDATE: This post from 2013 originally consisted of a brochure from eBay, but for this update I’ve added some additional brochures and Tom’s video showing how he uses the Blackhawk snow plow in Northern Wisconsin. The Arps Corportation manufactured these plows out of New Holstein, Wisconsin. Near the end of the video he shows how he mounts the plow and manual adjusts the angle using a chain.

Prices as of 1948:

Other material:

Continue reading →

UPDATE: **SOLD** Was on eBay.

I don’t think I’ve run across this brochure before.

“Equipment Brochure – Meyer Products Inc., Cleveland, Ohio – Snow Plows and the exclusive Electrolift for Jeep Vehicles – Fact Sheet / Model Recommendations for Jeep Vehicles – English language – 3 Colour – 4 pages – approx. 11 x 8.5 inch sized page – Code: Form No. 3-118; undated, likely dates to approx. 1960’s – Light wear, very good condition, 3-hole punched (no impairment of text).

Includes Black & White photos of various models of plows and angle dozer on Jeep Universal, 4WD Station Wagon, Truck and FC-170 Forward Control.”

Here’s a good Meyer Snow Plow brochure.

View all the information on eBay

Continue reading →

UPDATE: **SOLD** Was on eBay.

Neat old ad.

I haven’t seen many snow plows on 1/4 ton jeeps.

View all the information on eBay

Continue reading →

UPDATE: This is an a rewrite of a couple different brochures to document the snow plow and scraper relationship between the Glenn M. Rogers Company, the Morrison Railway Supply Company, and the Newgren Company.

I believe Morrison manufactured the Snowplow and Scraper based on a Rogers design and the completed item was marketed through the Newgren Company. As I’m no expert on these plows, or the relationship between these companies, this is all conjecture based on the brochures.

Here are several different brochures through the years and a couple Sno-Dozer data plates at the very bottom. This first brochure shows the Glenn M. Rogers company marketing the snow plow. This 1948 brochure does not mention the Morrison company.

In this brochure, also from 1948, it appears Newgren is offering a Roger’s plow setup that’s been combined with Monroe hydraulics (with three different hydraulic options no less).

There’s no date on this brochure, but in it Morrison is now credited with the manufacturing of the Rogers design, with Newgren still marketing the package. There’s no mention of the hydraulic options. I am leaning towards this being a circa 1949 – 1951 brochure. This brochure may have introduced the “Sno-Dozer” brand name.

Continue reading →

Originally several different posts, this post aggregates some of the Bros Rotary Sno-Flyr brochures.

This was from circa 1955:

Continue reading →

Has anyone ever seen one of these Western Snowblowers mounted to a jeep?

Western also produced wrecker setups as well (Pics from a 2015 eBay auction):
This brochure highlights the Western WC-3 Cranes for the FC, Jeep, and Jeep Truck.

“Up for Auction is a Rare and Amazing Western Wreckers for Willys 4WD Vehicles Jeeps-Jeep Trucks-Forward Control Trucks-3 Ton Cranes Brochure there are 2 pages in very good condition.”

I like the way the hydraulic line from the snow plow was fed through the open window. K & K claimed the blade could be installed in two minutes or less. I’m thinking it should have been called the “Two Minute Snow Blade”.