Features Research Archives

To Top

Classic Men’s Magazines & a Jeep Image

• CATEGORIES: Artists/Drawings, Features, Magazine, Old Images This site contains affiliate links for which I may be compensated.

My jaw dropped as I opened the magazine.  I was in my early teens (mid 70s).  To this day, I’m unsure why my father hid a couple Playboy magazines in with my mother’s stash of old magazines (I’m guessing he never thought she would look there?).  But, sure enough, in my hands was gold, my eyes were big, and it was coooool!  And thus, that was my first introduction to Playboy.

I can’t say I’ve done much research into the history of Playboy, but during a search of vintage magazines in general, I came across a website called Stagmags.com, which appears to be a gathering and recording of many old ‘stag’ magazines that have since gone out of publication.  It’s a reminder that Playboy had plenty of competition from day 1, but to Hef’s credit, managed to successfully carve out a successful niche, while many others failed.

Now, I only bring this up as a segway to one of two images I found on the page and which you can view below.  Hopefully that provides a little more insight into the image.

stagmags_com_image

 
To Top

Builds: 1947 CJ-2A with Detailed L-Head Rebuild

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Any of you Pirate 4×4 readers might have seen this thread about a 1947 CJ-2A rebuild (and I should probably spend more time on Pirate as I really haven’t spent any time at all on the site), but this is a nice detailed review of an L-head rebuild, frame restoration, disk brake installation on the original running gear, and  more.  Lots of pics and thoughtful, intelligent discussions.

Click here to see the entire build process

Here’s a few pics:  The beginning, a $2800 jeep from Port Angeles, Wa.  It’s in good condition, but will benefit from a rebuild.

pirate_build_1947_cj2a_1

Here it is partially dissassembled:

pirate_build_1947_cj2a_2

Here the engine is going back together.  BTW, did you know you can ‘borrow’ those pistron compressors through Schucks/Autozone as part of their lend a tool program:

pirate_build_1947_cj2a_3

The engine is more put together:

pirate_build_1947_cj2a_4

Here’s an updated master cylinder:

pirate_build_1947_cj2a_5

This is part of the brake discussion:

pirate_build_1947_cj2a_6

And here the jeep is back together:

pirate_build_1947_cj2a_7

 
To Top

1991 YJ + 1954 Wagon Fenders =?

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

The Israeli bureau (Or  Shahar) found this interesting project.  I think this build works better than I might have expected. The builder blended the truck fenders with the front clip of the YJ rather nicely.  There’s still plenty left to be done;  I look forward to seeing the final product.

“Ed started with a 1991 YJ with 4” lift, 15×10 alloys and 31×11.50 Thornbirds. While using the YJ’s hood, grill, tub and inner fenders he gained access to a 1954 Willys pickup and was able to blend the old Willys front and rear fenders to the YJ body giving the Jeep that retro “flattie” look. He said “you won’t believe how well the 2 meld together. I was going to build flat fenders (myself), but after a friend of mine who has a Willys Pickup, Wagon, and a Jeepster said he had some extra fenders (that cinched it).”

See the rest of the pics at http://www.4-the-love-of-jeeps.com/jeep-project.html

1991YJWillysProjectEdward1

1991YJWillysProjectEdward5fender

1991YJWillysProjectEdward6frt

 
To Top

Some Dealership Pics From Hemmings

• CATEGORIES: Features, Old Images • TAGS: This site contains affiliate links for which I may be compensated.

I found some Willys-Overland black and white pics from this Hemmings Blog Post.

factory_jamboree

pioneergarage_03_resized

pioneergarage_02_resized

 
To Top

How about this Camper?

• CATEGORIES: Camping, Features This site contains affiliate links for which I may be compensated.

From the ATVRider website:

Offroadcamperpopup31

Offroadcamperpopup11

Offroadcamperpopup21

 
To Top

1/2 Scale ’45’ Willys Vancouver, BC eBay

• CATEGORIES: Features, toys This site contains affiliate links for which I may be compensated.

The buy-it-now price is $12000.  The seller includes some pics of other half scale vehicles for sale and they look pretty good.    However, for $12,000 I can buy most any real jeep I want and have money left over for the trailer.

“Our Toy Cars are rooted in the nostalgia and romance of the high-performance British Racing of the past.  Each car is a collector’s item to be passed down from generation to generation. With an assembly time of over 450 hours per unit and a total factory output of 36 pieces per year, these cars are truly a special kind of toy. These high-performance toys are produced with superior engineering, creating an unforgettable driving experience for the young and not-so-young alike.

JEEP BODY: Fiberglass composite, painted with 2k Dupont automotive paint. Chassis: Steel subframe and GRP composite. Measurements: L 68″ X W 35″ X H 30″. Weight: 495 lbs (Crated 561 lbs). Tires: 4.00-8″. Drivetrain: Rear wheel drive – both wheels solid axle. Brakes: Hydraulic twin rear disk brakes, vented disks dual pot calipers with car master cylinder. Suspension: Independent front suspension, solid beam rear suspension. Electrics: 12V. Electric Starter. Working lights, Horn, indicators, back up alarm. Manual Transmission 3 forward,1 Reverse. 150CC- CVT AUTOMATIC ENGINE WITH REVERSE GEAR. Engine Type: 1 Cylinder, 4 stroke, air cooled. MAX POWER/ RPM: 5.6 kw/ 7500rpm. Max Torque / RPM 7.3 Nm / 6500 (rpm). Fuel Type: A90. Maximum speed: 45 MPH. I will help arrange for shipping anywhere in the world.

View all the pics on eBay

New_toy_jeep_1_5_scale_vancouver

New_toy_jeep_1_5_scale_vancouver2

New_toy_jeep_1_5_scale_vancouver3

New_toy_jeep_1_5_scale_vancouver4

 
To Top

Builds: Mike’s 3B build

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

Mike emailed me pics of his beautiful custom build this morning.  He’s taken his time over the past few decades to build something nice.  I especially like the heated seats :-).  But, this build isn’t just pretty; Mike takes it out on some ‘severe’ trails in the Northwest with his friend Phil, whose CJ-3A you can see here.

“Here are some photos of a CJ3B that I have worked on over the years.  I have had this jeep for over 20 years.  The frame started life as a 1950 CJ3A but the body was shot and I really like the 3B style.  I purchased a new steel body kit from 4 wheel parts wholesalers and at the time it was on sale and cost $900 complete.

The way it is now is the final version.  The color is Impact orange, The motor is an all aluminum  5.3 L33 engine that only had 6 miles on it.  The transmission is a turbo 350 mated to a Dana 300.  The rear end is a 1975 CJ5 Dana 44 with full floating axles and disc brakes with 4:56 gears.  The front end is a dana 30 with the same gears and disc brakes.   It has power steering and an aluminum radiator .

The interior is 2008 Corvette buckets with power and they are heated (great in colder weather) Lokar shifter, autometer gauges, Flaming river column plus a lot of other things.”

Ins-Jeep-1

Ins-Jeep-2

Ins-Jeep-3

Ins-Jeep-4

 
To Top

Remember to Play with your Willys …

• CATEGORIES: Builds, Features, News • TAGS: This site contains affiliate links for which I may be compensated.

Paul wanted to wish everyone a happy ‘stainless’ new year and to tell you to remember to play with your Willys!

Paul writes, “By 7:30 this morning (Jan 1st) I was back in the garage working on the Willys (fitting the door seal upper attach flanges) and starting my twentyfifth year on this rebuild.  I hope to have the stainless Willys fully finished and on the road within the next two years where folks seeing it for the first time and unaware of the time I spent on this project will deem it an overnight success!  We do have long winter nights and the winter’s are kind of long but not THAT long.  Anyway, after the Jeep is done I have a 1951 military 1/4 ton trailer I plan on rebuilding out of stainless steel to match the Jeep.  This will be an easy job and shouldn’t take all that much time.

After all I’ve learned while fabricating the various stainless parts over the years I figure I could crank out another stainless Willys in fifteen years or so but I have other projects waiting for attention so I believe I’ll stop after completing this one.”

If you haven’t seen Paul’s project, click here.

And a pic of the Alaskan Wilderness:

Alaska_image_paul

 
To Top

Wooden Bodies at Cherrybronco.com

• CATEGORIES: Features, Wood bodies • TAGS: This site contains affiliate links for which I may be compensated.

These wooden Jeeps and Broncos were built by a craftsman named Jack who posted these photos to a website called Cherry Bronco.com (site was live in 2010, but has been down for years). He made wooden vehicles and furniture as a hobby in his spare time.

In the case of the 1977 Cherry Ford Bronco below, as you can see in the before and after pics, the body was pretty trashed and in need of something new.  The pieces are all 7/8″ to 1″ pieces glued and screwed together.  The bumpers and trim are done in Oak and Ash.  A single coat of linseed Oil and three coats of Marine Varnish protect the finish and the owners clean it with furniture polish.  Surprisingly, the new  wooden body is actually 300lbs lighter than the original metal.

bronco_cherry_wood_prewood

bronco_cherry_wood1

Here’s a 1956 CJ-5

1956_cj5_wood_jeep

1956_cj5_wood_jeep2

wood_jeeps5_hubcap

Here’s a 1966 CJ-5

1966_cj5_wood_jeeps

Here’s a 1969 CJ-5

1969_cj5_wood_jeeps

And a 1977 CJ-5

1977_cj5_wood_jeep

 
To Top

Builds – Gerald’s Brother’s 1 Year Build

• CATEGORIES: Builds, CJ-3A, Features This site contains affiliate links for which I may be compensated.

On New Year’s weekend last year, Gerald and his brother towed home a Craigslist find.  One year later, they are almost done with a great looking budget build.  Gerald tooks some pics and tells the story.  Thanks guys — and I agree with you on those tires.  They look great!

Gerald writes, This started as a Craigslist ad for a 1948 Willys CJ-2A basket case.   He wanted alot more, but after a month of trades and low balls he took the 1000 dollars offer for the lot. Much of the dirty work was done and lots of parts were included.  The jeep finally arrived home over new years weekend, January 2009.

Gerald_Brother1jpg

Gerald_Brother2

Because we didn’t trust any of the work done thus far, our first task was to take it apart the rest of the way.  Once apart, we first focused on fitting the body correctly, which was a 10 + year old MD Juan generic (m-38 / mb) body, along with the stock hood and grill.   We also fabbed up a rear crossmember and hitch.

As we examined some of the running gear parts, we discovered the rear axle was shot (which we replaced from a spare beater jeep out back) and decided to add new 11 inch brakes for the front (from craigslist). The springs were new, so that saved time and money. We tore down the motor, transmission and transfer case to make sure they were in good shape, and then refit them properly to the frame, including fabbing up some motor mounts.

Then, we went to work on the roll cage, which was partially built out of some bar from our old family jeep along with some new tube. After we got everything mocked up, we tore it back apart to get ready for painting.

Gerald_Brother3

Gerald_Brother4

There was stripping and sanding, more stripping and sanding, and then, finally, we sprayed it a deep blue.  We took the time to paint the underside of the body first, along with many of the parts. Then, we assembles the body to the frame and gave it a final coat.

Gerald_Brother5

Gerald_Brother6

Gerald_Brother7

Next came the small stuff such as gauges, wiring, linkages, fuel system, windshield and exhaust.  BTW, I have never seen a head with a fixed rear outlet.  Does anyone know if this could be from a truck?

Gerald_Brother8

One of the most critical steps occurred this week, almost one year from the start date of the project:  The Jeep gets the right set of wheels and tires.  As you could see in the earlier pics, the jeep came with some new tires, but we felt they weren’t right (700 15), so my brother sold them on Craigslist.

Instead, he went with these Interco Super Swamper Radials 265 80 16.  They are mounted on 8 inch wide alum wheels, which was another Craigslist find.  I think these are perfect tires for a Willys in my estimate.  He picked them up today in Wheeling, West Virginia, at National tire.

Gerald_Brother9

Gerald_Brother10

 
To Top

The Swamp Rat

• CATEGORIES: Features, Last Ride This site contains affiliate links for which I may be compensated.

After seeing Chad’s build yesterday, Gerald sent me pics of the ‘Swamp Rat’, which also sports a flathead V8.  Of course, it’s got a bit more wear and tear on it than Chad’s, but i have to say I really like the way that fits in the engine compartment. This sure has an old school feel to it.

Gerald notes, “Check out Johnny’s wood cab and side pipes.  The paint chipped off the windshield, but it used to say RAT.  It’s a star attraction at one of our local yards.”

Swamp_Rat_1

Swamp_Rat_2

Swamp_Rat_3

Swamp_Rat_4

 
To Top

Willys/Jeep Slogans

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

One day as I was going through some old brochures, I started recording some of the slogans.  Here’s just a few of them:

Jeep:  The world’s most useful vehicle
The sun never sets on a jeep
Ten Billion Miles of Proof
Willys puts the F in Farm Power
Keep America on the Move
Do it quicker; do it better with 4wd
A revolutionary vehicle for a thousand jobs
There’s a Jeep vehicle for your toughest job
Willys Builds the Universal Jeep
The Worlds Hardest Workers
The Worlds’ most willing workers
Sign of the times, Willys Jeep Vehicles
You’ll be ‘busy as a bee’ in your new vehicle from Jeep
Two things Willys is known for, Beauty & Stamina (which referred to the Aero and the Jeep)

 
To Top

Builds: Chad’s Ford Model A Roadster PU Willys

• CATEGORIES: Builds, CJ-2A, CJ-3A, Features, Unusual, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a wonderful build, an experiment by a reader named Chad.  He wanted to know what a Ford Model A Roadster would look like if Willys built it. So, naturally, he built one himself!

He writes, “Did all of it myself except the upholstery, in my home garage. It’s got a flathead V8 for power and took between 6 and 8 years start to finish. The dDrivetrain is flathead V8 adapted to a C-4 automatic adapted to Dana 18. Front axle is Dana 27 w/Corvette discs….rear is Dana 44 with one piece axles and Lock-rite geared 4.27.  I thought maybe it would be a four year job, but stuff happens  and there was a whole lot of headscratching to make things look ‘somewhat factory’. I used as many factory parts as I could but not necessarily the way they were used ‘by the factory’…..(those are Jeepster tailights, but they aren’t mounted that way on a Jeepster, just as an example).”

Great work and thanks for sharing!

frankie

frankierear

interior

engine

 
To Top

Hadley Engineering — The Veep

• CATEGORIES: Advertising & Brochures, Features, Unusual, VEEP (VW Jeep), Scamp, Others This site contains affiliate links for which I may be compensated.

UPDATE: Additional links — The Hadley Engineering Brochure and VEEPS vs. SCAMPS and other model.

Based on a reader’s inquiry, I decided to do some research regarding the Veep.  I’ve seen a few of these for sale over the past couple of years, but it doesn’t happen often and I really knew nothing about them. So, here’s the little bit I learned.

According to the Dune Buggy Archives, the Veep was sold as both a completed jeep and as a kit by Hadley Engineering, which was based at 1778 Monrovia, Costa Mesa, CA 92627 (maybe they are still there).  The company claimed that any Beetle or Karman Ghia could be used to build a Veep in about 40 hours.

I’ve only seen two engine sizes so far, a 1600 cc or a 1800 cc VW motor.  The suspension, frame, and running gear is all VW.  Most of the veeps appear to use a replacement M-38 body, though one ad below claims a ’42 body (mb or gpw) was used.   The gas tank is mounted in the front, which simply looks odd when you open the hood.  Below is a couple brochures and some misc Veeps.  In the posts below are some additional Veeps.

I’m still hardly an expert on these, so if you have additional information, I’d love to learn more.

brochure_veep

veep_kit

blue_veep_bob_garrard

gray_veep

race_veep

veep_brown

 
To Top

Pics from the past

• CATEGORIES: Features, Old Images, Women & Jeeps This site contains affiliate links for which I may be compensated.

Gerald found these pics.  If anyone has or runs across any similar pics, I’d like to see them.

1. Here’s an ad for the older Armstrong tires:

armstrong_tires_ad

2. A vintage 1946  stamped envelope top from Willys Overland:

willys_overland_postagestamp

3. During a search for the 1960 auto show pics, Gerald found this image from the 1965 auto show.  He immediately thought of the show Mad Men.  The girls may be as lovely as the ones on the show, but the men are much older (compare the photos below and you decide!

1965_autoshow

 
To Top

Builds: Phil’s former 1953 CJ-3A

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

I ran across this website, which shows pictures of Phil’s former 1953 CJ-3A.  According to his website, he has sold this jeep. It’s solid looking, nice jeep.

What I liked about some of these pics is that they show a solution for installing a taller engine into a flattie.  I figured there might be some readers out there who would find this interesting.

Here’s some pics of the transfer case/tranny undercarriage.  Note how it has been dropped with some square tubing.

1953_cj3a_shelvin1

Now look at how the engine has been dropped.  Solid plates and arms reach out from the engine to the frame and mount on top of something welded to the side of the frame.  It I were doing this, I’d probably beef up the metal that spans the gap from the engine to the frame.  What I can see is if there is rubber underneath the point where the engine mount meets the frame.

1953_cj3a_shelvin_engine1

1953_cj3a_shelvin_engine2

1953_cj3a_shelvin_engine3

Note the back of the frame has been lifted by inserting a block between the shackle and the frame.  Strangely, this wasn’t done in the front.

1953_cj3a_shelvin3

Note the hood on this CJ-3A.  It appears to be a trimmed down CJ-3B Hood.

1953_cj3a_shelvin5

Here’s are some more pics of this build ….

Continue reading

 
To Top

Builds: Mac and Jason’s CJ-2A Project

• CATEGORIES: Builds, Features, Website This site contains affiliate links for which I may be compensated.

Titled, the “CJ-2A 1948 Willys Overland Jeep Restoration Project“, this blog follows the rebuilding of a 1948 Willys by Mac and Jason in Houston, Tx.  It’s clear they don’t know a great deal about jeeps (neither did I when I started on my jeep many years ago), but are jumping in with both feet none-the-less.  Kudos to them; it looks like they are learning already.

1948_cj2a_houston_website

 
To Top

Photos – From “03Jeepgirl”

• CATEGORIES: Features, Women & Jeeps This site contains affiliate links for which I may be compensated.

I was doing some research and found some pics from a female photographer on flickr who calls herself 03Jeepgirl.  She owns two jeeps, though she didn’t get specific about what she owns.  She’s posted a large number of old vehicle pics, including these flattie shots.

You can see all her pics here

jeepgirl_photo2

jeepgirl_photo1

jeepgirl_photo3

 
To Top

Builds: Josh’s WW2 US Navy Converto T6 Trailer

• CATEGORIES: Builds, Features, trailer This site contains affiliate links for which I may be compensated.

Josh sent over some pics of a very rare WW2 US Navy Converto T6 Trailer.  Josh is curious to know if any other readers have or know of these trailers.  I’ll be happy to set aside some space for Converto trailer owners to gather and share information.

Also, he’s got another trailer for sale on eBay (Converto Airborne Dump Trailer — see post below this one).

Josh writes, “Here are some pictures of my WW2 US Navy Converto T6 trailer I mentioned to you a while back. I found it here in Boise, though it was never advertised for sale. It is almost identical to a more well known Bantam t3 or a Willys MBT.  During the war there were a number of companies producing nearly identical trailers for the military.  The only notable difference between my MBT or T3  and the Converto T6 are a different brake hand set up, dataplate, and, in the case of my trailer, a ball hitch that is stamped USN 1944. (My hitch is different from the two other Converto T6s I’ve heard about — They both have the standard military lunettes)   The data plate was originally riveted to my trailer but the past owner removed it to paint it grey again with spray paint. The under side of my trailer has what I believe to be the original paint and some yellow stenciling that has shipping info/load info. I plan to fully restore and hold onto this T6.

Converto also produced a T7 (same 1/4 ton trailer as the MBT/T3/T6 but with a tailgate) and a Converto Airborne Dump Trailer which is a 1/2 ton but used with the jeep. There is really little info I can find out on either the T6 orT7, but the Dump trailers do have a lot of info available including a military TM.  I have had a few Converto Airborne Dump Trailers.  They are very hard to find as it is estimated only about 6500 where produced. I’m unsure how many T6/T7 were produced. Not very many based on how few are still around. Maybe we can find a few more with your readers??”

converto_trailer4

converto_trailer9

converto_trailer3

Continue reading

 
To Top

Club Run: Flatties on the Slick Rock in Utah

• CATEGORIES: Club Runs, Features This site contains affiliate links for which I may be compensated.

I’ve seen lots of pics of modified vehicles that crawl the slickrock of Southern Utah; so. it’s a nice change to see these two classic jeeps cover the trails without issue.

Randall writes, I thought maybe some other old school jeepers might like to see a few photos of a recent club outing to Moab.  The jeeps did great and the scenery was absolutely awesome. The “slickrock” on “Fins&Things” and “Hell’s Revenge” trails was amazing.

The M38 is a 1952, all stock with four banger, T-90, and Dana 44 with 5:38’s.  The other is a ’52 3A.  Also bone stock with Dana 41.  The only upgrade on it is 11″ brakes and 12v.  This was our first trip, but probably won’t be our last.  We went the first week of Nov. and hit great weather by luck.  We’d hoped to have more jeeps make it but too many conflicts for everyone.  Had a blast with just four of us in the two jeeps.  They climbed just about anything a sane, middle aged man would need to climb and the gears made descents very doable with little need for much braking.  HOWEVER, I was glad the brakes were in very good condition when we first went down some of the trails.

Randall_adams_m38_1

Randall_Adams_m38_2

Randall_Adams_m38_3

 
To Top

Duke Edwards == Hot Rod Artist

• CATEGORIES: Artists/Drawings, Features, Unusual This site contains affiliate links for which I may be compensated.

I found the image below on eBay. The bidding has ended, but I”m sure it will return. I thought it looked very similar to Brian’s CJ-3B (or former CJ-3B — did you ever sell it?). After located a pic of the CJ-3B, I concluded it must have been used as the model of the drawing.

One image below is the drawing and one is a shot of the CJ-3B from the CJ-3B page (See more pics of it there — It’s a beauty!).

According to an old ebay listing, this particularly drawing is a run of 250 prints of a drawing by artist Duke Edwards.  I didn’t know who Duke Edwards was, so I did a google search and found the information below from the ‘Automotive Art Gallery‘.

“Duke has been “doodling” for almost 40 years but had limited his clientele to friends and local car clubs. Since making his work available to the public, he has received international recognition and has pieces on museum display as well as in private collections. For just “doodling” Duke is amazingly talented.”

brian_leetch_cj3b_drawing

brian_leetch_cj3b

 
To Top

Old Pics: Phil Nelson’s Place

• CATEGORIES: Features, Old Images This site contains affiliate links for which I may be compensated.

UPDATE: Bob also snapped a picture at Phil Nelson’s Place in Columbiana. You can see it below.

1946_Willys

I’ve never been there, but these are some great pics of the place from Gerald.

“A small display outside of Phil Nelson’s place in Columbiana Ohio.  It is truely a treasure.”

phils_yard1

phils_yard2

phils_yard3

 
To Top

L-head and F-head performance

• CATEGORIES: Engine, Features, Website This site contains affiliate links for which I may be compensated.

I found this article on Automotive.com, though it’s really an article from JP Magazine.  The article highlights improving performance on a variety of Jeep engines.  Here’s two excerpts and a great pic.

Dual carburetor manifolds in the ’50s were available for just about any engine you could imagine and an old-time company, Burns, made a log-type manifold that utilized two Stromberg Ford V-8 carburetors for the Jeep four-cylinder. I’m sure these helped the four-cylinder flathead’s performance, but, still, the long-stroke 134.2ci engine needed a lot more than this…”

And a little on the F-head

The next step was to swap in a later model F-head engine. It wasn’t technically an engine swap because it was a direct bolt in. Still the same basic engine, but a new cylinder head design with the intake valves upstairs in the head instead of the block. Depending on the compression ratio, which ranged from 6.9 to 7.8 (depending on year and usage), it was rated at 72 to 75 horsepower at around 4,000 rpm and torque was up to 114lb-ft. This one got a balance job, some performance pistons from Speed-O-Motive, and a Holley carb from a Falcon six. My new performance motor maybe made 100 horsepower on a good, damp day.

Harry Buschert, who owned a farm implement repair shop in Hemet, California, was a real innovator in design. He built up a very-modified, four-cylinder F-head that even had a Paxton Blower that he had salvaged off a Packard….”

built_lhead

 
To Top

Jim Boswell’s Seat Cushions

• CATEGORIES: Features, Parts This site contains affiliate links for which I may be compensated.

UPDATE:  Jim used to make these seat cushions, but no longer does.  I’ve decided to keep these here just in case someone is looking for ideas for Seat Cushions.

 

rear_seat_cushions3

rear_seat_cushions1

rear_seat_cushions2

 
To Top

Builds: More on Paul’s Stainless M-38

• CATEGORIES: Builds, Features • TAGS: This site contains affiliate links for which I may be compensated.

If you haven’t yet read about Pauls M-38 project, go to installment 1 and installment 2.

Paul, take it away …

Paul Bierman again with a few more pictures of the never ending Willys project.  I didn’t want a rear seat (Who can fit back there anyway?) so I fabricated a storage box which spans between the rear wheel wells and is divided into two sections.  The half behind the passengers seat is the new battery location along with the circuit breaker panel, the master relay and circuit breaker and most of the switch relays.  The half behind the driver’s side is the home of a now vintage (but it’s still brand new, I bought it quite a while ago) ten disc cd changer with some room left over for an out of view storage compartment.  I’ve replaced just about all of the wiring with new (there’s some original wiring on the gas heater still but I’ll get to that sometime) with some fancy pants, super flexible cold weather wiring which stays flexible down to 55 below zero F.  Boy, doesn’t that just make you feel dandy.  If it’s that cold I’ll wait till spring, besides I try to draw the line on outside work when the temperature drops past 40 below zero F, nothing’s worse than having to take a leak when you’re wearing multiple layers of clothing eight inches thick and Little Mr. Wizzard shrunk up to an inch and a half.  No matter what you do you know at least one of your boots is going to get wet.

Moving the instrument panel above the windshield caused still more problems but the most annoying one was how I could get all the wires from the gauges down to the main body without my work looking like crap.  I was at work thinking this over (Ok, I was in the bathroom but I do my deepest thinking sitting down) when I happened to glance over at the wall and saw a beautiful stainless steel handle just the right size with curved ends, satin finished and everything!   Problem solved, until I mentioned this great solution to my boss and his exact response was, “Touch it and die.”  Geeze, guess I’ll have to spend my own money and purchase some handicap grab handles.  The local home supply store had quite a selection of stainless handles but I ran into a problem with an over enthusiastic clerk wanting to help me with my bathroom remodel.  He’d never heard of a 52 Willys bathroom renovation.  The handles worked out great, you can see them on the pictures of the windshield/instrument panel photos by the door posts.

Winter was late getting here (I love global warming!) but I have lots of cold dark days ahead of me so the Willys will get a great deal of attention before this latest batch of snow melts.  Next week I’ll have the side and rear window glass cut and then I’ll have to make patterns for the door window glass and they’ll be ordered when my wallet says it’s ok.

PS …  I’ve really enjoyed the comments left by fellow Willys wackos, the concern about welding above the jerry can was nice but the can had never been used and I threw it out after I’d made the gas can mount.  If I was to worry about welding safety I should have thought about the beef and bean burrito (with cheese and onions on top) I’d eaten for lunch, not so much for the flamability aspect (the poor garage just isn’t that tightly sealed) but the thrust developed after lunch could have blown me off those fancy bucket workstands!

Nov 09 008

Nov 09 010

Nov 09 012_3

Nov 09 024